Operation Manual

72
Counter 1, Counter 2
Set the counter increment and increment timing for when a counter is set to text.
Increment Trigger
Select the trigger for incrementing the counter value from one of the following:
[Separator]
The count is incremented at each file separator.
[Page]
The count is incremented at each new page.
[Never]
The count is not incremented.
Increment
Set the counter increment within the range 0 to 255.
Reset Trigger
Select the trigger for resetting the counter value from one of the following:
[Separator]
The counter is reset at each file separator.
[Page]
The counter is reset at each new page.
[Never]
The counter is not reset.
Start Value
Set the counter start value after a reset within the range 0 to 255.
Print Settings
Horizontal Offset (mm)
Specify the horizontal position where text is to be printed/added on within the
range 0 to 300. Specify how many mm from the left edge of the document
entrance characters are to be printed/added on in the feed direction.
Vertical Offset (mm)
Specify the vertical position where text is to be printed/added on within the
range 0 to 500. Specify how many mm from the leading edge of the original
characters are to be printed or added.
Setting Scan Conditions
Downloaded from www.Manualslib.com manuals search engine