Operation Manual

System Requirements

You must have the following hardware and OS for Scanning Utility 5060 to work.

● An IBM PC/AT or compatible computer with a Pentium 133 MHz CPU or

faster and at least 64 MB of memory

• OS: Microsoft Windows

95/98/Me or Microsoft Windows NT

4.0

Workstation, Microsoft Windows

2000 Professional

• At least 100 MB of hard disk space (at least 5 MB at installation)

● An SVGA compatible display

● A Microsoft Windows compatible keyboard, mouse and printer, CD-ROM

drive (4× speed or faster recommended)

● A SCSI card whose operation has been confirmed

Operation of the following SCSI cards has been confirmed:

Adaptec AHA-2930 series and AHA-2940 series

● SCSI-2 compatible SCSI cable

MEMO

● Scanning Utility 5060 uses a dedicated scanner driver. Scanner drivers such

as the ISIS driver and TWAIN driver are not required.

● When you install Scanning Utility 5060, another folder “\ceiscan” is created

under the Windows folder in addition to the installation destination folder,

and the file “cei*.dll” is copied to \Windows\system.

Scanning Utility 5060 will not function properly if these files are modified.

● Scanning Utility 5060 uses “wnaspi32.dll” for controlling the scanner. The

scanner will not operate if “wnaspi32.dll” is not correctly installed.

NOTE

When Scanning Utility 5060 is used, set the scanner to the Backup mode or

the Scanner Only mode. If Scanning Utility 5060 is used in the Filmer only

mode, an error message is displayed when scanning is started.

Downloaded from www.Manualslib.com manuals search engine