EOS Utility for Windows Instruction Manual (for EOS DIGITAL cameras released in 2006 or earlier)

2828
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
With RAW Image Task (RAW image processing software), you can
adjust the tone curve of a shot RAW image, and you can save the result
as a tone curve file.
In EU, this tone curve file as well as [Sharpness] and [Contrast] settings
can be registered as processing parameters in the camera (up to three
settings), and can be used as the processing parameters when shooting
in a specific environment.
For instructions on how to save a tone curve file using RAW Image Task,
refer to “Adjusting RAW Images” in the “ZoomBrowser EX Instruction
Manual” (PDF electronic manual).
1
Click [Parameters].
¿ The [Parameters settings] dialog box appears.
Setting Parameters and Applying to the Camera
1Ds Mk II
1D Mk II
1Ds
1D
2
Select a tab to be set and specify the settings for
each item.
3
Click the [Apply to Camera] button.
¿ The [Confirm settings] dialog box appears.
4
Check the settings and click the [OK] button.
¿ The processing parameter is registered on the camera.
5
Click the [Close] button.
¿ The [Parameters settings] dialog box closes and the display
returns to the shot settings window.
6
Select the registered parameter on the camera.
O For selecting processing parameters, refer to “Setting the
Processing Parameters” in the camera’s Instruction Manual
provided with your camera.
Sets the standard tone
curve
Select a tone curve file
saved to your computer
in the window that is
displayed
Drag left or right to set
* With the
, [Sharpness]
and [JPEG Quality] are
displayed
1Ds
1D
Sets the tone curve file saved in RAW Image Task
* With the , [User Defined] is displayed
1Ds
1D
COPY