EOS Utility for Windows Instruction Manual (for EOS DIGITAL cameras released in 2006 or earlier)

88
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Connect the camera and computer with the IEEE1394 interface cable
(IFC-450D6) provided with your camera.
1
Connect the cable’s plug to the IEEE1394 port on the
computer.
O Both plugs of the cable are the same, so connect either plug.
O For the location and direction of the IEEE1394 port, refer to the
computer User’s Manual.
2
Connect the cable’s plug to the camera’s < >
terminal.
O Connect with the < > mark on the plug facing the back of the
camera.
O Both plugs of the cable are the same, so connect either plug.
O Image downloading preparation is now complete. Continue with
“Starting up EU” (p.9).
Connecting the 1Ds, 1D and a Computer
When connecting the interface cable plug to the computer and
camera, make sure you match the shape of the plug with the shape
of the IEEE1394 port before connecting. The camera or computer
may become damaged if connected incorrectly.
If your computer has a 4-pin type IEEE1394 port, you will need to
use a 4-pin – 6-pin type Canon interface cable (sold separately).
COPY