PUB.
Important Usage Instructions Introduction WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws.
IMPORTANT SAFETY INSTRUCTIONS In these safety instructions the word “product” refers to the Canon HD Camcorder VIXIA HG21 A / VIXIA HG20 A and all its accessories. 1 2 3 4 5 6 7 8 9 10 11 Read Instructions — All the safety and operating instructions should be read before the product is operated. Retain Instructions — The safety and operating instructions should be retained for future reference. Heed Warnings — All warnings on the product and in the operating instructions should be adhered to.
16 Objects and Liquid Entry — Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Be careful not to spill liquid of any kind onto the product. 17 Servicing — Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Online product registration for U.S.A. Customers only. Register your product online at www.registercanon.com Protect your product We will keep the model number and date of purchase of your new Canon product on file to help you refer to this information in the event of an insurance claim such as loss or theft. Receive information on new products and promotions Upon your request, we will send you information on Canon new products and promotions.
Enjoying High-Definition Video with your Camcorder Preserve your most treasured memories, be it unforgettable scenery or cherished moments spent with family and friends, with high-definition video recordings of a quality second only to actually being there.
Enjoying High-Definition Video with your Camcorder What are the advantages of a hard disk? Your videos and photos are recorded on the built-in hard disk or commercially available SD/SDHC memory cards2 using AVCHD specifications3. This Double Media recording system gives you longer recording times for more high-definition videos and photos. • You can shoot approximately 11 hours ( 120 GB HDD) or 5.5 hours ( 60 GB HDD) of video in MXP mode, which offers the highest video quality under AVCHD specifications.
Important Notes About the Hard Disk Drive Your hard disk camcorder allows you to shoot and store many hours of video. However, there are differences between recording onto a hard disk and recording onto other media. Make sure to follow the points below when using your camcorder. For more details, refer to Handling Precautions ( 116).
Important Notes About the Hard Disk Drive Do not turn off the camcorder while the camcorder is on and the ACCESS indicator is on or flashing or while the camcorder is in standby mode Doing so may result in hard disk damage or permanent data loss. Use the camcorder within its operating temperature range If the camcorder's temperature becomes too hot or too cold, recording/playback may stop in order to prevent hard disk damage.
Table of contents Introduction 6 8 14 16 16 17 20 Enjoying High-Definition Video with your Camcorder Important Notes About the Hard Disk Drive About this Manual Getting to Know the Camcorder Supplied Accessories Components Guide Screen Displays Preparations 23 23 24 26 27 27 28 28 30 30 30 31 31 31 32 33 33 10 Getting Started Charging the Battery Pack Preparing the Wireless Controller and Accessories Adjusting the Position and Brightness of the LCD Screen Basic Operation of the Camcorder The
Table of contents Video 34 34 35 36 37 37 38 38 40 41 42 43 44 45 45 46 47 48 48 49 50 51 52 53 53 54 55 56 57 57 57 58 60 Basic Recording Shooting Video Selecting the Video Quality (Recording Mode) Zooming Quick Start Function Reviewing and Deleting the Last Scene Recorded Basic Playback Playing Back the Video Changing the Index Screen Selection Selecting Scenes by Recording Date Selecting the Playback Starting Point from the Movie Timeline Selecting Recordings from the Index Screen Deleting Scenes
Photos 61 61 62 63 Basic Recording Taking Photos Selecting Photo Size and Quality Deleting a Photo Right After Recording It 63 Basic Playback 63 65 Viewing Photos Deleting Photos 66 66 66 67 67 68 69 69 70 70 71 72 72 73 75 76 Additional Functions Magnifying Photos during Playback Flash Histogram Display Drive Mode: Continuous Shooting and Exposure Bracketing Taking Photos while Recording Movies (Simultaneous Recording) Light Metering Mode Capturing a Photo from the Playback Scene Protecting Photo
Table of contents Additional Information 90 90 92 Appendix: Menu Options Lists FUNC.
Introduction About this Manual Thank you for purchasing the Canon VIXIA HG21/VIXIA HG20. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting ( 101). Conventions Used in this Manual • • • IMPORTANT: Precautions related to the camcorder’s operation. NOTES: Additional topics that complement the basic operating procedures.
Special Scene Recording Programs Names of buttons and switches other than the joystick are indicated within a “button” frame. For example FUNC. . Brackets [ ] are used to refer to menu options as they are displayed on screen. In tables in this manual the default value is shown in boldface. For example [On], [Off]. Recording in a very bright ski resort or capturing the full colors of a sunset or a fireworks display becomes as easy as selecting a Special Scene recording program.
Introduction Getting to Know the Camcorder Supplied Accessories CA-570 Compact Power Adapter (incl.
Components Guide Left side view Right side view button ( 27)/ (print/share) button ( 73, 86) DISP. (on-screen display) button ( 42, 53)/ BATT.
Introduction VIEWFINDER button* ( 35) Viewfinder* ( 26, 35) Dioptric adjustment lever* ( 35) Battery attachment unit ( 23) RESET button ( 104) ACCESS indicator ( 34, 61)/ CHG (charge) indicator ( 23) Start/Stop button ( 34) Mode dial Recording movies ( 34) Taking photos ( 61) Playing back movies ( 38) Viewing photos ( 63) DC IN terminal ( 23) Remote sensor ( 25) LCD screen ( 26) Joystick ( 28) FUNC.
Bottom view Tripod socket ( 117) BATTERY RELEASE switch ( 24) Serial number The serial number label is located on the top surface of the battery attachment unit. Remove the battery pack to find it. Wireless Controller WL-D88 START/STOP button ( 34) FUNC.
Introduction Screen Displays Recording Movies Playing Movies (During Playback) 20 Operating mode Recording program ( 45, 46) White balance ( 50) Image effect ( 51) Digital effect ( 52) Recording mode ( 35) Photo quality/size (simultaneous recording) ( 68) Remote sensor off ( 98) Hard disk/memory card operation ( 22) Instant AF ( 94), MF Manual focus ( 49) Remaining battery time ( 22) While recording/during playback: Scene counter (hours : minutes : seconds) Record pause mode: Total number of scenes Rema
Recording Photos Viewing Photos Zoom ( 36), Exposure ( 48) Recording program ( 45, 46) Light metering mode ( 69) White balance ( 50) Image effect ( 51) Digital effect ( 52) Drive mode ( 67) Photo quality/size ( 62) Instant AF ( 94), MF Manual focus ( 49) Remaining battery time ( 22) Number of available photos On the hard disk On the memory card Image stabilizer ( 94) Self timer ( 48) AF frame ( 94) Camcorder shake warning ( 94) Focus and exposure lock ( 61) Flash ( 66) Histogram ( 67) Current photo / Tota
Introduction Hard disk/memory card operation Record, Record pause, Playback, Playback pause, Fast playback, Fast reverse playback, Slow playback, Slow reverse playback, Frame advance, Frame reverse , Remaining recording time When there is no more free space on the recording media, “ END” (built-in hard disk) or “ END” (memory card) will be displayed and the recording will stop. 24F progressive frame rate Select the 24F progressive frame rate ( 47) to give your recordings a cinematic look.
Preparations This chapter describes basic operations, such as navigating the menus, and first time settings to help you learn more about your camcorder. Getting Started DC IN terminal CHG (charge) indicator Charging the Battery Pack The camcorder can be powered with a battery pack or directly using the compact power adapter. Charge the battery pack before use. For approximate charging times and recording/playback times with a full battery pack, refer to the tables on pages 123-124.
Preparations TO REMOVE THE BATTERY PACK on aircraft and ships, DC-AC inverters, etc. NOTES BATTERY RELEASE switch 1 Slide BATTERY RELEASE in the direction of the arrow and hold it pressed down. 2 Slide the battery pack down and then pull it out. IMPORTANT • Turn off the camcorder before connecting or disconnecting the compact power adapter. After pressing ON/OFF to turn off the camcorder, important data is updated on the hard disk. Be sure to wait until the indicator turns off.
1 Press the tab in the direction of the arrow and pull out the battery holder. 2 Place the lithium button battery with the + side facing up. 3 Insert the battery holder. • If the wireless controller does not work, check that [Wireless Remote Control] is not set to [ Off ] ( 98). Otherwise, replace the battery. Accessories TO USE THE WIRELESS CONTROLLER Fasten the grip belt. Adjust the grip belt so that you can reach the zoom lever with your index finger, and the Start/Stop button with your thumb.
Preparations Adjusting the Position and Brightness of the LCD Screen Rotating the LCD Panel Open the LCD panel 90 degrees. • You can rotate the panel 90 degrees downward. • You can rotate the panel 180 degrees toward the lens. Rotating the LCD panel 180 degrees can be useful in the following cases: - To allow the subject to monitor the LCD screen while you use the viewfinder. - To include yourself in the picture when recording with the self timer.
Basic Operation of the Camcorder The Button: Flexible Recording Mode or The camcorder offers two basic modes for recording video or photos: mode for beginners or if you just prefer not to bother with detailed camcorder settings, and flexible recording mode which lets you change the camcorder's settings to your preference. FLEXIBLE RECORDING Press the button again to return to the flexible recording mode (the button's light is off). You can access the menus and change settings to your preference.
Preparations Joystick and Joystick Guide Use the joystick to operate the camcorder's menus. Push the joystick up, down, left or right ( , ) to select an item or change settings. Selecting a FUNC. Menu Option Following is an example of selecting a FUNC. menu option in a recording mode. Press the joystick itself ( ) to save the settings or confirm an action. On menu screens, this is indicated by the icon . Press to display/hide the joystick guide.
Selecting an Option from the Setup Menus NOTES A small font size is used in menu screens so you can see all options and current settings in one screen. You can enlarge the font size by setting [Font Size] to [ Large] but you may have to scroll down to find some menu options and only the icons of the current settings will be displayed. 1 2 Press FUNC. . 3 Select ( ) the tab of the desired menu. The settings available will change as you move between the menu tabs.
Preparations First Time Settings Setting the Date and Time You will need to set the date and time of the camcorder before you can start using it. The [Date/Time] screen will appear automatically when the camcorder’s clock is not set. • The date appears in a year-month-day format only in the first setup screen. In subsequent screen displays the date and time will appear as month-day-year (for example, [Jan. 1, 2008 12:00 AM]). You can change the date format ( 99).
Changing the Time Zone Using a Memory Card Change the time zone to match your location. The default setting is New York. TO SET THE HOME TIME ZONE Memory Cards Compatible for Use with the Camcorder FUNC. [ Menu] [Time Zone/DST] Your local time zone* FUNC. WHEN YOU TRAVEL FUNC. [ Menu] [Time Zone/DST] Local time at your destination* FUNC. * To adjust for daylight saving time, select the area name marked with a .
Preparations Memory card Capacity 64 MB or less SD memory cards SD Speed Class Recording movies Not applicable Recording photos – 1,2 Not compatible 128 MB or more 1 or higher SDHC memory cards 1 2 1 Over 2 GB or higher Movies cannot be recorded when the recording mode is set to MXP (24 Mbps) or FXP (17 Mbps). On some memory cards you may not be able to record movies at all.
Selecting the Recording Media Options [Quick Initialization] You can select to record your movies and photos on the built-in hard disk or on a memory card. The hard disk is the default media for recording both. TO CHANGE THE MEDIA FOR RECORDING MOVIES FUNC. [ Menu] or [Rec Media for Movies] or [Rec Media for Photos] Select the hard disk or memory card* FUNC. * For each media, you can check the total, used and available space.
Video This chapter covers functions related to shooting movies, including recording, playback, menu options and playlist and scene operations. WHEN YOU HAVE FINISHED RECORDING Basic Recording 1 Make sure that the ACCESS indicator is off. 2 Turn off the camcorder. 3 Close the LCD panel. Shooting Video IMPORTANT 1 2 3 34 Set the mode dial to . Turn on the camcorder. By default, movies are recorded on the hard disk. You can also set the memory card as the recording media for movies ( 33).
• When recording in very loud places (such as fireworks shows or concerts), sound may become distorted or it may not be recorded at the actual levels. This is not a malfunction. Using the Viewfinder When recording in bright places it may be difficult to use the LCD screen. In such case, change the brightness of the LCD screen* ( 26) or use the viewfinder instead. Press VIEWFINDER to activate the viewfinder along with the LCD panel. Close the LCD panel to use only the viewfinder.
Video Approximate recording times Recording mode → MXP* FXP* XP+ SP Default value LP Recording media ↓ 60 GB Hard disk 5 hr. 30 min. 7 hr. 50 min. 10 hr. 50 min. 18 hr. 22 hr. 55 min. 120 GB Hard disk 11 hr. 5 min. 15 hr. 45 min. 21 hr. 40 min. 36 hr. 45 hr. 55 min. 1 hr. 30 min. 4 GB Memory card 20 min. 30 min. 40 min. 1 hr. 10 min. 8 GB Memory card 40 min. 1 hr. 1 hr. 25 min. 2 hr. 20 min. 3 hr. 16 GB Memory card 1 hr. 25 min. 2 hr. 5 min. 2 hr. 50 min. 4 hr. 45 min.
Quick Start Function When you close the LCD panel with the camcorder on, the camcorder enters the standby mode. In standby mode the camcorder consumes only about half the power used when recording, saving energy when you are using a battery pack. Additionally, when you open the LCD panel, the camcorder is ready to start recording in approximately 1 second*, ensuring you do not miss important shooting opportunities. * The actual time required varies depending on the shooting conditions.
Video Basic Playback 1 Press to display the joystick guide. If does not appear on the joystick guide, repeatedly push the joystick ( ) toward [Next] to display it. 2 Push the joystick ( ) toward . The camcorder plays back the last scene (but without sound) and returns to record pause mode. Playing Back the Video Deleting a Scene After Recording It After recording a scene: 1 Review the scene as described in the previous section. 2 While reviewing the scene, select ( ) the icon and press .
• Press to stop the playback and return to the scene index screen. ADJUSTING THE VOLUME Special playback modes To enter the special playback modes, you can use the buttons on the LCD panel or wireless controller ( 19). There is no sound during the special playback modes. Fast playback 1 During playback, press to display the joystick guide. 2 Adjust ( ) the volume. IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing.
Video NOTES Example of changing the index screen in mode: During some special playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.) in the playback picture. Changing the Index Screen Selection Use the tabs on top of the index screen to switch between playback of the scenes and photos recorded on the hard disk and those recorded on the memory card. After creating a playlist ( 58), you can switch between the original movies and the playlist you edited to your liking.
• The list of recordings displays all dates in which recordings were made. An orange selection frame appears on the day. • The thumbnail shows a still image from the first scene recorded on that day. Below it will appear the number of scenes recorded ( ) and the total recording time for the same day. Changing the Number of Items in the Index Screen By default, the index screen will show up to 6 items (scenes or photos). Move the zoom lever toward W to show up to 15 items per screen.
Video 3 4 Move ( , ) the cursor to the desired date. • When you move the cursor to a date displayed in white, a thumbnail showing a still image from the first scene recorded on that date will be displayed next to the calendar. Below it will appear the number of scenes recorded ( ) and the total recording time for the same day. • You can select ( ) the year or month field and change ( ) the year or month to move faster between calendar months.
• mode: Select the (hard disk) or (memory card) tab ( 40). • mode: Move the zoom lever toward W to display the index screen. TO SELECT ANOTHER SCENE Move ( ) the orange selection frame to the large thumbnail and change ( ) the scene. TO MOVE BETWEEN TIMELINE RULER PAGES Move ( ) the orange selection frame to the slidebar below the ruler and display ( ) the previous/next 5 frames in the scene. 2 Open the selection screen. FUNC.
Video This step is not necessary to delete all scenes or previously selected scenes. NOTES • The selection of scenes/photos will be canceled if you turn off the camcorder or change the operating mode. • Scenes in the playlist cannot be included in the selection. Deleting Scenes 2 Delete the scene(s). FUNC. [ Delete] Desired option [Yes]* [OK] FUNC. * If you selected any option other than [This Scene], you can press to interrupt the operation while it is in progress.
Advanced Functions FUNC. Special Scene Recording Programs [ Programmed AE] [ Portrait] Press to display the Special Scene (SCN) recording programs Desired recording program FUNC. Recording in a very bright ski resort or capturing the full colors of a sunset or a fireworks display becomes as easy as selecting a Special Scene recording program. For details about the available options, refer to the sidebar below. NOTES • [ Night] - Moving subjects may leave a trailing afterimage.
Video • • • • - White points may appear on the screen. - Autofocus may not work as well as in other modes. In such case, adjust the focus manually. [ Fireworks] - To avoid camcorder shake, we recommend using a tripod. Make sure to use a tripod especially in mode, as the shutter speed slows down. [ Portrait]/[ Sports]/[ Beach]/ [ Snow] - The picture may not appear smooth during playback. [ Portrait] - The blur effect of the background increases the more you zoom in (T).
1/2*, 1/4*, 1/8, 1/15, 1/30 To record in dimly lit places. 1/60 To record under most ordinary conditions. • When setting a numeric value (aperture or shutter speed), the number displayed will flash if the aperture or shutter speed is not appropriate for the recording conditions. In such case, select a different value. 1/100 To record indoor sports scenes. 1/250, 1/500, 1/1000** To record from within a moving car or train or to shoot fast-moving subjects such as roller coasters.
Video Self Timer Manual Exposure Adjustment and Automatic Backlight Correction FUNC. [ Menu] [Self Timer] or [On ] FUNC. appears. mode: In record pause mode, press Start/Stop . The camcorder starts recording after a 10-second countdown*. The countdown appears on the screen. mode: Press PHOTO , first halfway to activate the autofocus and then fully. The camcorder will record the photo after a 10-second countdown*. The countdown appears on the screen. * 2 seconds when using the wireless controller.
• If you operate the zoom, the brightness of the image may change. 3 Adjust the ( ) the brightness of the image as required and press . • The exposure adjustment indicator will change to white and the exposure will be locked. • During exposure lock, press and push the joystick ( ) toward [Exposure] again to return the camcorder to automatic exposure.
Video Infinity Focus [ Use this function when you wish to focus on faraway subjects such as mountains or fireworks. Instead of step 2 in the previous procedure: Push the joystick ( ) toward [Focus] and hold it for more than 2 seconds. • appears. • Push the joystick ( ) toward [Focus] again to return the camcorder to autofocus. • If you operate the zoom or joystick ( ), changes to “MF” and the camcorder returns to manual focus. Shade] For recording in shaded places.
NOTES • When you select the custom white balance: - Set the custom white balance in a sufficiently illuminated place. 93). - Turn off the digital zoom ( - Reset the white balance when the lighting conditions change. - Depending on the light source, may keep flashing. The result will still be better than with [ Automatic].
Video TO SET THE CUSTOM IMAGE EFFECT Setting FUNC. 1 Press and select ( ) the custom setting options. 2 Adjust ( ) each setting as desired. 3 When you finish all the adjustments, press then FUNC. to save the setting and close the menu. [ Digital Effect Off] Desired fader/effect* FUNC. ** * You can preview the digital effect on the screen. **The icon of the selected digital effect appears.
TO ACTIVATE AN EFFECT mode: Activate the selected effect while recording or in record pause mode. mode: Activate the selected effect and then press PHOTO to record the photo. NOTES • When you apply a fader, not only the picture but also the sound will fade in or out. When you apply an effect, the sound will be recorded normally. • The camcorder retains the last setting used even if you turn off the digital effects or change the recording program.
Video Manual Adjustment of the Audio Recording Level 1 2 Press to display the joystick guide. If [ MIC] does not appear on the joystick guide, repeatedly push the joystick ( ) toward [Next] to display it. Push the joystick ( ) toward [ MIC]. The manual adjustment icon will appear to the left of the audio level indicator and the manual adjustment bar (orange) will appear below it.
• Do not connect the headphones to the AV OUT/ terminal if the icon does not appear on the screen. Only noise will be output in such case. NOTES • Use commercially available headphones with a ∅ 3.5 mm minijack. • When you change the operating mode, [AV/Headphones] setting in the mode will return to [ AV]. FUNC. [ Menu] [AV/Headphones] [Headphones] FUNC. appears.
Video Attach the optional DM-100 Directional Stereo Microphone to the mini advanced shoe. Refer to Using the Mini Advanced Shoe ( 55). appears. For details about using the microphone, refer to the instruction manual of the DM-100. Using other microphones NOTES Accessories designed for the Advanced Accessory Shoe cannot be used with this camcorder. Look for video accessories bearing this logo to ensure compatibility with the mini advanced shoe. You can also use commercially available microphones.
Using a Video Light You can use the optional VL-5 Video Light to shoot video or take photos in dark places. Attach the optional VL-5 Video Light to the mini advanced shoe. Refer to Using the Mini Advanced Shoe ( 55). appears when you turn on the video light. For details about using the video light, refer to the instruction manual of the VL-5. Playlist and Scene Operations Dividing Scenes You can divide scenes (original scenes only) in order to leave out the best parts and later cut out the rest.
Video NOTES • In this mode, the scene playback will pause only at points where the scene can be divided. Advancing/reversing frames will skip only between such points as well, so the interval will be longer than in regular frame advance/ reverse. • The following scenes cannot be divided: - Scenes included in the scene selection (marked with a checkmark). Remove the selection mark in advance. - Scenes too short (3 seconds or shorter). - Scenes that were not recorded with this camcorder.
Moving Scenes in the Playlist NOTES • You can copy scenes from the hard disk to the memory card ( 60) to include in the memory card’s playlist also scenes that were originally recorded on the hard disk. • You may not be able to add scenes to the playlist if they were recorded or edited using another device or if there is not enough space available on the hard disk or memory card. Deleting Scenes from the Playlist Move the scenes in the playlist to play them back in the order of your choice.
Video FUNC. [ Copy ( Desired option [Yes]* FUNC. [OK] Copying Scenes You can copy original movies or the entire playlist only from the hard disk to the corresponding location on the memory card. * Press to interrupt the operation while it is in progress. Copying the Entire Playlist 1 Select the index screen of the hard disk's playlist. Select the tab ( 40). 2 Copy the playlist. FUNC. [ Copy ( FUNC. [Yes]* [OK] Copying Original Movies Options [All Scenes] Copies all the scenes to the memory card.
Photos Refer to this chapter for details on shooting photos – taking photos and playing them back, capturing photos from video and printing photos. recorded after the autofocus is activated and locked. Basic Recording 4 Taking Photos Press PHOTO fully. The ACCESS indicator will flash as the photo is being recorded. IMPORTANT Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.
Photos FUNC. Selecting Photo Size and Quality [ 2048x1536] Desired photo size* Desired photo quality* Photos are recorded as JPG files. As a general rule, select a larger photo size for higher quality. Select the [ 1920x1080] size for photos with an aspect ratio of 16:9. FUNC. * Press to move back and forth between size and quality selection. The number displayed on the right corner indicates the approximate number of photos that can be recorded with the current quality/size setting.
• When printing photos, use the following guidelines as a reference for selecting the print size. Photo size Basic Playback Recommended use L 2048x1536 To print photos up to A4 size. M 1440x1080 To print photos up to L size (9 x 13 cm, 3.5 x 5 in.) or postcard size (10 x 14.8 cm, 4 x 6 in.). S 640x480 To send photos as e-mail attachments or to post on the Web. LW 1920x1080, SW 848x480 To print photos with a 16:9 aspect ratio. Wide-sized photo paper is required.
Photos Index Screen 1 Move the zoom lever toward W. • The photo index screen appears. • You can switch to the index screen of the photos recorded on the memory card or change the number of photos displayed per page ( 40). 2 Select ( , ) a photo. • Move the orange selection frame to the photo you want to view. • Repeatedly press or to move between index screen pages. 3 Press . The index screen closes and the selected photo is displayed.
Deleting Photos 2 Select ( , ) the photo you want to delete. This step is not necessary to delete all photos or previously selected photos. 3 Delete the photo(s). FUNC. [ Delete] You can delete those photos that you are not interested in keeping. Desired option Deleting a Single Photo [Yes]* [OK] FUNC. * If you selected an option other than [This Photo], you can press to interrupt the operation while it is in progress. Some photos will be deleted nevertheless. IMPORTANT 1 Select ( delete.
Photos Additional Functions Flash You can use the flash to take photos in dark places. Magnifying Photos during Playback Options During playback, photos can be magnified up to 5 times. will appear for photos that cannot be enlarged. (auto) Default value The flash fires automatically according to the brightness of the subject. (flash on) The flash always fires. (flash off) The flash does not fire. 1 2 66 Move the zoom lever toward T.
• The flash will not fire in the following cases: - When you manually adjust the exposure in (auto) mode. - During auto exposure bracketing. - In the [ Fireworks] recording program. - When using the optional VL-5 Video Light. • The practical range of the flash is approx. 1 to 2 m (3.3 to 6.6 ft.). The actual range will depend on the recording conditions. • The range of the flash decreases in continuous shooting mode. • The flash mode cannot be selected when the exposure is locked.
Photos [ Auto Exposure Bracketing] The camcorder records 3 photos using 3 different exposures (dark, normal, light in 1/2 EV steps), allowing you to choose the photo you like the best. FUNC. [ Single] Desired option FUNC. CONTINUOUS SHOOTING/ HI-SPEED CONTINUOUS SHOOTING 1 Press PHOTO halfway to activate the autofocus. 2 Press PHOTO fully and hold it pressed down. AUTO EXPOSURE BRACKETING Press PHOTO , first halfway to activate the autofocus and then fully to record the photos.
Light Metering Mode Capturing a Photo from the Playback Scene The camcorder measures the light reflected from the subject in order to calculate the optimal exposure settings. Depending on the subject, you may want to change the way the light is measured and evaluated. Options [ Default value Evaluative] Appropriate for standard shooting conditions, including backlit scenes.
Photos • Photos will be recorded on the media selected for recording photos ( 33). [Remove All] Removes the protection from all photos. FUNC. [ Protect] Desired option [Yes] Protecting Photos You can protect photos from accidental erasure. [OK] FUNC. IMPORTANT Initializing the recording media ( 33) will permanently erase all recordings, including protected photos. Protecting Single Photos 1 Open the photo selection screen. FUNC. [ Protect] [ Protect] appears on the screen.
Copying Photos from the Index Screen Options - Do not disconnect the power source or turn off the camcorder. - Do not change the position of the mode dial. [All Photos] NOTES Copies all the photos. [This Photo] Copies only the photo marked with the orange selection frame. [Selected Photos] Copies all the photos selected in advance (marked with a checkmark). Refer to Selecting Recordings from the Index Screen ( 43). 1 Select the index screen of the photos recorded on the hard disk.
Photos • The (print/share) button lights up and the current print settings will be displayed for approx. 6 seconds. Printing Photos IMPORTANT Printing Photos (Direct Print) The camcorder can be connected to any PictBridge-compatible printer. You can mark in advance the photos you want to print and set the desired number of copies as a print order ( 76). Canon printers: SELPHY printers of the CP, DS and ES series and PIXMA printers marked with the PictBridge logo.
Printing with the Button (Print/Share) You can print a photo without changing the settings simply by pressing . Options [Paper Settings] [ Paper Size]: Available paper sizes vary depending on the printer model. [ Paper Type]: Select [Photo], [Fast Photo], [Plain] or [Default]. [ Page Layout]: Select [Default], [Bordered] or one of the following page layouts. [Borderless]: The photo is enlarged and may be slightly cropped at the edges to fit the paper. [x photos/sheet]: Refer to the sidebar on page 74.
Photos The print settings menu appears. Trimming settings ( TO CANCEL THE PRINTING 75) 1 Press 2 Select ( Paper settings Current paper settings (paper size, paper type and page layout) while printing. ) [OK] and press . WHEN YOU HAVE FINISHED PRINTING Disconnect the cable from the camcorder and printer and turn off the camcorder. Number of copies PRINT ERRORS Print effect Date printing 3 In the print settings menu, select ( , ) the setting you want to change and press .
• Canon's PictBridge-compatible printers: If printing does not resume automatically after you solved the problem, select [Continue] and press to resume printing. If that option is not available, select [Stop] and press and then restart printing from the beginning. • Other printers or if the error still persists with a Canon printer: If printing does not resume automatically, disconnect the USB cable and turn off the camcorder. After a short while, turn on the camcorder and restore the USB connection.
Photos NOTES • The trimming settings are canceled in the following cases: - When you turn off the camcorder. - When you disconnect the USB cable. - When you expand the trimming frame beyond its maximum size. - When you change the [Paper Size] setting. • You may not be able to set the trimming settings for photos that were not recorded with this camcorder. 3 Press to set the print order. The number of copies appears in orange. 4 Set ( ) the number of copies desired and press .
2 Open the print menu. FUNC. [ Menu] [ Print] • The print menu appears. • If there are no photos marked with print orders, [No print orders have been set] appears. • Depending on the connected printer, you may be able to change some print settings ( 73). 3 Select ( , ) [Print] and press . Printing starts. The print menu disappears when the printing is completed. NOTES • To cancel the printing, refer to page 74. • Restarting printing: Open the print menu as explained in step 2.
External Connections This chapter explains how to connect your camcorder to an external device such as a TV, VCR, or computer. Terminals on the Camcorder HDMI OUT Terminal* Access: Open the rear terminal cover. The HDMI OUT terminal offers a high-quality digital connection that combines audio and video in a single convenient cable. COMPONENT OUT Terminal* Access: Open the front terminal cover. The component video terminal is for video only.
Connection Diagrams Connections that can be used to connect the camcorder to a TV are listed in falling order of picture quality. Connection Type: Digital Quality: High definition Output only Connect to a high-definition TV (HDTV) with an HDMI input terminal.
External Connections Connection Type: Analog Quality: Standard definition Output only Connect to a standard TV or a VCR with audio/video input terminals. Change the following settings on the camcorder: [AV/headphones] to [ AV] ( 96).
Playback on a TV Screen Connect the camcorder to a TV to enjoy your recordings with family and friends. Playback on an HDTV using one of the high-definition connections will ensure the best playback quality. 1 2 Turn off the camcorder and the TV. 3 Turn on the connected TV. On the TV, select as the video input the same terminal to which you connected the camcorder. Refer to the instruction manual of the connected TV. 4 Turn on the camcorder and set it to mode ( 38) or mode ( 63).
External Connections Saving and Backing Up Your Recordings definition copies of your movies ( 86). IMPORTANT Backing Up Your Recordings on a Computer Movies recorded with this camcorder are saved on the hard disk or memory card. Because space is limited, make sure to back up your movies onto a computer on a regular basis. PIXELA ImageMixer 3 SE With the software supplied on the PIXELA ImageMixer 3 SE CD-ROM you can select scenes and back them up on your computer's hard disk.
Options for creating AVCHD discs ( mode) [All Scenes] Connecting to the DW-100 DVD Burner and Creating a Disc 1 Turn on the DVD Burner. DW-100 Refer to Creating DVDs. 2 Connect the camcorder to the DVD Burner using the supplied USB cable. • Connection . Refer to Connection Diagrams ( 79) and DW-100 Connections. • If the device type selection screen appears, select [DVD Burner] and press . • When the connection is completed, [No disc] will be displayed. 3 Insert a brand new disc into the DVD Burner.
External Connections 4 Press the start button on the DVD Burner. • A progress bar will be displayed on the screen. • After pressing the start button (while the current disc is being written) the operation cannot be canceled. • When the last disc is finalized, [Task completed] will be displayed. Take out the disc and close the disc tray. WHEN THE DATA REQUIRES MULTIPLE DISCS After a disc is finalized it will be ejected automatically and a message will appear. Insert the next disc and close the disc tray.
NOTES If a scene does not fit entirely in one disc, it may be divided and continue on the next disc. Playing Back AVCHD Discs Using the DW-100 DVD Burner You can use the optional DW-100 DVD Burner and the camcorder also to play back high-definition (AVCHD) discs on a TV. This is very convenient, for example to play back your discs even in a location where an AVCHD-compatible DVD player is not available. 1 Connect the camcorder to the TV. Refer to Connection Diagrams ( 79).
External Connections Copying your Recordings to an External Video Recorder Transferring Photos to a Computer (Direct Transfer) You can copy your recordings by connecting the camcorder to a VCR or a digital video device. Video output will be in standard definition, although the original scenes are in high definition. With the software supplied on the DIGITAL VIDEO Solution Disk CD-ROM you can transfer photos to a computer simply by pressing .
• If the device type selection screen appears, select [Computer/Printer] and press . • The direct transfer menu appears on the camcorder screen and the button lights up. FIRST-TIME CONNECTION TO A COMPUTER RUNNING WINDOWS Windows users only: The first time you connect the camcorder to the computer, you also need to select the CameraWindow auto-launch setting. DVSD Refer to Starting CameraWindow.
External Connections Transferring Photos Automatic Transfer Options All the relevant photos will be transferred to the computer in one batch and their thumbnails will be displayed on the computer. [ Transfers all photos. [ New Photos] Transfers only those photos that have not yet been transferred to the computer. [ AUTOMATIC TRANSFER OPTIONS All Photos] Photos with Transfer Orders] Transfers photos marked with transfer orders ( 89). Select ( ) a transfer option and press .
Transfer Orders You can mark in advance the photos you want to transfer to the computer as transfer orders. You can set transfer orders for up to 998 photos. Selecting Photos to Transfer (Transfer Order) Set the transfer orders before connecting the camcorder to the computer. Marking Single Photos with Transfer Orders 1 Setting Transfer Orders from the Index Screen Options [Individual Photos] Opens the same screen described in Marking Single Photos with Transfer Orders ( 89).
Additional Information This chapter contains troubleshooting advice, screen messages, handling and maintenance tips, and other information. Appendix: Menu Options Lists Menu items not available appear grayed out. For details about how to select an item, refer to Using the Menus ( 28). For details about each function, see the reference page. Menu options without a reference page are explained below the tables. FUNC. Menu FUNC. Menu FUNC.
Menu item Setting options Recording mode [ [ [ [ [ Simultaneous recording [ [ Simultaneous Recording Off], [ 848x480] [ Super Fine], [ Photo size/quality [ [ 1920x1080], [ 640x480] [ Super Fine], [ z – 35 1920x1080], z – 68 1440x1080], – z 62 43 High Quality 24 Mbps], High Quality 17 Mbps], High Quality 12 Mbps], Standard Play 7 Mbps], Long Play 5 Mbps] Fine], [ Normal] 2048x1536], [ Fine], [ Normal] Setup Menus FUNC.
Additional Information Menu item Setting options [Transfer Orders] From single photo view: – From the index screen: [Individual Photos], [Selected Photos], [Remove All] – z 89 [Delete] Original movies: [All Scenes], [All Scenes (this date)], [This Scene], [Selected Scenes] z – 44 Scenes in the playlist: [All Scenes], [This Scene] z – 59 From the index screen: [All Photos], [This Photo], [Selected Photos] – z 65 [Calendar Screen], [Date Selection] z – 41 33 [Scene Search] 1 2 Optio
[Focus Assist Functions]: When the focus assist functions are activated, the image at the center of the screen is magnified and outlines are emphasized to help you focus manually ( 49). • Using the focus assist functions will not affect the recordings - they will be cancelled when you start recording. [Onscreen Markers]: You can display a grid or a horizontal line at the center of the screen. Use the markers as a reference to make sure your subject is framed correctly (vertically and/or horizontally).
Additional Information [AF Mode]: Select how fast the autofocus will operate. • With [ Instant AF] the autofocus adjusts quickly to a new subject. This is convenient for example when changing the focus from a near subject to a far subject in the background, or when recording fast-moving subjects. • When the optional Wide-converter or Tele-converter is attached to the camcorder, it may partially obstruct the Instant AF sensor. Set the AF mode to [ Normal AF].
[Microphone Attenuator]: Helps prevent audio distortions in due to high audio recording levels. • Set the microphone attenuator to [ On] when the audio recording level ( 53 ) is set correctly but the audio still sounds distorted. When the microphone attenuator is activated, appears on the screen.
Additional Information System Setup 1 Menu item Setting options [Font Size] [ Large], [ Small] z z z z – [Output Onscreen Displays] [ On], [ Off] z z – – – z z z z – [ ],[DEUTSCH], [ ] [ENGLISH], [ESPAÑOL], [FRANÇAIS], [ITALIANO], [MAGYAR], [MELAYU], [POLSKI], [ ], [TÜRKÇE], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ] z z z z 30 [Component Output]* [ z z z z – [TV Type]* [ Normal TV], [ – – z – – [AV/Headphones] [ AV], [ z – z – 54 z – z – 55 – –
[TV Type]: In order to display the picture in full and in the correct aspect ratio, select the setting according to the type of television to which you will connect the camcorder. [ Normal TV]: TV sets with 4:3 aspect ratio. [ Wide TV]: TV sets with 16:9 aspect ratio. • When the TV type is set to [ Normal TV], during the playback of video originally recorded with an aspect ratio of 16:9, the picture will not be displayed full screen.
Additional Information [Wireless Remote Control]: Allows the camcorder to be operated with the wireless controller. [Notification Sounds]: A beep will accompany some operations like turning on the camcorder, the self-timer countdown, etc. [Power Saving Mode]: In order to save power when the camcorder is powered by a battery pack, it will automatically shut off if left without any operation for 5 minutes. • Approximately 30 seconds before the camcorder shuts off, [Auto power off] will appear.
[Drop Sensor]: Detects when the camcorder is dropped and activates a protection mechanism to help prevent hard disk damage. While the mechanism is active, appears in red on the screen and playback/recording may stop. • Keep the drop sensor set to [ On] in most situations. Deactivating this function can increase the likelihood of hard disk damage should the camcorder be dropped.
Additional Information [Battery Info]: Displays a screen where you can verify the battery charge (as a percentage) and the remaining recording time ( , mode) or playback time ( , mode). [HDMI Status]: Displays a screen where you can verify the standard of the video output signal from the HDMI OUT terminal.
Trouble? Troubleshooting If you have a problem with your camcorder, refer to this section. Sometimes what you think is a malfunction of the camcorder may have the simplest of solutions - please read the “CHECK THIS FIRST” box before going on to the more detailed problems and solutions. Consult your dealer or a Canon Service Center if the problem persists.
Additional Information Recording Pressing Start/Stop will not start recording. - You cannot record while the camcorder is writing previous recordings on the hard disk/memory card (while the ACCESS indicator is on or flashing). - The recording media is full or it already contains the maximum number of scenes. Delete some recordings ( 44, 65) or initialize the recording media ( 33) to free some space. - Recording may not be possible while the drop protection mechanism ( 99) is active ( appears).
Playback Pressing the playback button does not start playback. - The camcorder has exceeded its operational temperature ( appears). Turn off the camcorder and let it cool down before resuming use. - The camcorder has fallen below its operational temperature ( appears). Turn it off and use it in a warmer location. Make sure to avoid rapid temperature changes. Cannot add scenes to the playlist. - You cannot add more than 999 scenes to the playlist.
Additional Information The CHG (charge) indicator flashes rapidly. (one flash at 0.5-second intervals) Charging has stopped because the compact power adapter or the battery pack is faulty. Consult a Canon Service Center. The CHG (charge) indicator flashes very slowly. (one flash at 2-second intervals) The battery pack is too hot. Charging will start once the battery pack temperature is below 40 °C (104 °F). - Charge the battery pack in temperatures between 0 °C and 40 °C (32 °F and 104 °F).
The picture is displayed correctly but there is no sound from the built-in speaker. - Open the LCD panel. - Speaker volume is turned off. Adjust the volume ( 39). - If the STV-250N Stereo Video Cable is connected to the camcorder, disconnect it. A rattling can be heard from the camcorder. - The internal lens fixture can move when the camcorder is turned off. This is not a malfunction. The camcorder vibrates.
Additional Information The camcorder is connected using the optional HTC-100 HDMI Cable, but there is no picture or sound from the HDTV. - Disconnect the HTC-100 HDMI Cable and then restore the connection or turn the camcorder off and then on again. The camcorder is connected using the optional HTC-100 HDMI Cable, but HDMI-CEC does not work (cannot play back using the TV's remote control). - Disconnect the HTC-100 HDMI cable and turn off the camcorder and the TV.
List of Messages (in alphabetical order) Following the list of messages for the camcorder you can find separate lists for printrelated messages ( 113) and for messages that appear only when using the optional DW-100 DVD Burner ( 112). Access error - There was an error when reading the hard disk or attempting to write onto it. - This message can also appear if condensation has formed ( 121). Wait until the camcorder dries completely before resuming use. Accessing the memory card.
Additional Information Cannot edit Check the memory card - The memory card in the camcorder was initialized using a computer. Initialize the memory card with this camcorder ( 33). Cannot enter standby mode now - The camcorder cannot enter standby mode if the remaining battery charge is too low. Cannot play back - There is a problem with the hard disk/memory card. Cannot play back due to high temperature - The camcorder has exceeded its operational temperature ( down before resuming use. appears).
Cannot record movies on this memory card - Movies cannot be recorded on a 64 MB or smaller memory card. Cannot record movies on this memory card Initialize only using the camcorder - The memory card in the camcorder was initialized using a computer. Initialize the memory card with this camcorder ( 33). Cannot record Cannot access the HDD - There is a problem with the hard disk. Cannot record Check the memory card - There is a problem with the memory card. Change the battery pack - Battery pack is exhausted.
Additional Information Error writing on the memory card. Data may be recovered if the memory card has not been removed. Attempt recovering the data? - This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card. Select [Yes] to try to recover the recordings. If you removed the memory card and used it with another device after this happened, we recommend you select [No].
No memory card - There is no memory card in the camcorder. No photos - There are no photos to play back. No scenes - There are no scenes in the recording media selected. Number of scenes already at maximum - The maximum number of scenes has been reached. Delete some scenes ( 44) to free some space. Operation canceled - The operation was canceled following user intervention. Playlist is full. Cannot divide the scene. - Scenes cannot be divided when the playlist already contains 999 scenes.
Additional Information The lens cover is not fully closed. Turn the camcorder off, then on again. - The lens cover did not close completely when you set the camcorder to a playback mode. Turn the camcorder off and then on again. If the problem persists, contact a Canon Service Center. The lens cover is not fully open. Turn the camcorder off, then on again. - The lens cover did not open completely when you set the camcorder to a recording mode. Turn the camcorder off and then on again.
- The disc may not be loaded correctly. Try removing the disc and reinserting it. Error reading the data - Error while reading the recordings from the camcorder. - Check that the USB cable was not accidentally disconnected. No disc - Insert a disc into the DVD Burner. - This message can appear also if condensation has formed ( completely before resuming use. 121). Wait until the DVD burner dries No photos - There are no photos to add to the disc. No scenes - There are no movies to add to the disc.
Additional Information Hardware error - Cancel printing. Turn off the printer and turn it back on. Check the printer status. If the printer is equipped with a battery, it might be exhausted. In such case, turn off the printer, replace the battery and turn it back on. Incompatible paper size - The paper settings of the camcorder conflict with the printer’s settings. Ink absorber full - Select [Continue] to resume printing.
Printer in use - The printer is in use. Check the printer status. Printing error - Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the USB cable. Check the printer status. - When you are printing using the button, check the print settings. Readjust trim settings - The trimming settings for this photo were lost as a result of changes in the paper-related settings.
Additional Information Do’s and Don’ts Handling Precautions Camcorder Make sure to observe the following precautions to ensure maximum performance. Make sure to also observe the precautions pertaining to the hard disk, as hard disk damage may result in permanent data loss. • Back up your recordings periodically.
• Use the camcorder within its operating temperature range. If the camcorder’s temperature becomes too hot or too cold, recording/ playback may stop in order to prevent hard disk damage. In such case, a warning will appear on the screen. • Do not use the camcorder at high altitudes. To prevent hard disk damage, do not turn on or use the camcorder at altitudes higher than 3,000 m (9,800 ft.) above sea level or in other places with low atmospheric pressure.
Additional Information Long-term storage Remaining battery time If you do not intend to use the camcorder for a long time, store it in a place free of dust, in low humidity, and at temperatures not higher than 30 °C (86 °F). If the remaining battery time displayed is not correct, charge the battery pack fully. However, the correct time may not be displayed if a fully charged battery pack is used continuously in high temperatures or it is left unused for long periods of time.
• Do not use memory cards in places subject to strong magnetic fields. • Do not leave memory cards in places subject to high humidity and high temperature. • Do not disassemble, bend, drop, or subject memory cards to shocks and do not expose them to water. • Check the direction before inserting the memory card. Forcing a memory card into the slot if it is not correctly oriented may damage the memory card or the camcorder. • Do not attach any labels or stickers on the memory card.
Additional Information Disposal When you delete movies or initialize the hard disk or memory card, only the file allocation table is altered and stored data is not physically erased. Take the necessary precautions when you dispose of the camcorder or memory card, for example by physically damaging it to prevent the leakage of private data. If giving the camcorder to another person, initialize the built-in hard disk or memory card using the [Complete Initialization] option ( 33).
Condensation Using the Camcorder Abroad Moving the camcorder rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if condensation is detected. Continued use may damage the camcorder.
Additional Information General Information System Diagram (Availability differs from area to area) CG-800 Battery Charger SS-600/SS-650 Shoulder Strap WS-20 Wrist Strap BP-807**, BP-808, BP-819, BP-827 Battery Pack WL-D88 Wireless Controller CA-570 Compact Power Adapter WD-H37 II Wide-converter TV/HDTV HTC-100 HDMI Cable TL-H37 Tele-converter DTC-100 D Terminal Cable VCR/DVD recorder CTC-100 Component Cable CTC-100/S** Component Cable DW-100 DVD Burner FS-H37U Filter Set SC-2000 Soft Carrying
Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center. Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc.
Additional Information Recording and Playback Times Recording and playback times given in the following tables are approximate and vary according to recording mode and charging, recording or playback conditions. The effective usage time of the battery pack may decrease when recording in cold surroundings, when using the brighter screen settings, etc. Using the hard disk Battery pack BP-807 BP-808 BP-819 BP-827 Recording mode→ MXP FXP XP+ SP LP Maximum recording time 80 min. 85 min. 90 min.
TL-H37 Tele-converter This Tele-converter lens increases the focal length of the camcorder lens by a factor of 1.5. • The image stabilizer is not as effective when the Tele-converter is attached. • The minimum focusing distance at full telephoto with the TL-H37 is 3 m (9.8 ft.). • When the Tele-converter is attached, a shadow may appear in the picture when you use the flash. WD-H37 II Wide-converter This lens decreases focal length by a factor of 0.
Additional Information DM-100 Directional Stereo Microphone This highly sensitive, super-directional microphone attaches to the camcorder’s mini advanced shoe. It can be used as directional microphone (monaural) or stereo microphone. Shoulder Strap You can attach a shoulder strap for more security and portability. SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. This mark identifies genuine Canon video accessories.
Product Codes Provided Accessories CA-570 Compact Power Adapter BP-807 Battery Pack WL-D88 Wireless Controller CTC-100 Component Cable STV-250N Stereo Video Cable IFC-400PCU USB Cable 8468A002AA D85-1792-000 D83-0770-000 1719B001AA 3067A002AA (D82-0590-002) 9370A001AA Optional Accessories BP-808 Battery Pack BP-819 Battery Pack BP-827 Battery Pack CG-800 Battery Charger TL-H37 Tele-converter WD-H37 II Wide-converter FS-H37U Filter Set HTC-100 HDMI Cable SS-650 Shoulder Strap SS-600 Shoulder Strap WS-20 Wr
Additional Information Specifications HG21/HG20 System Recording System Movies: AVCHD Video compression: MPEG-4 AVC/H.264; Audio compression: Dolby Digital 2ch DCF (Design rule for camera system), compatible with Exif1 Ver. 2.
Terminals AV OUT/ Terminal USB Terminal COMPONENT OUT Terminal (Proprietary mini-D terminal) HDMI OUT Terminal MIC Terminal ∅ 3.5 mm minijack; Output only (dual purpose terminal also for headphones stereo output) Video: 1 Vp-p / 75 ohms unbalanced Audio: –10 dBV (47 kohm load) / 3 kohm or less mini-B, USB 2.0 (Hi-Speed USB) Luminance (Y): 1 Vp-p / 75 ohms; Chrominance (PB/PR (CB/CR)): ±350 mV 1080i (D3) / 480i (D1) compatible; Output only HDMI mini connector; Output only; compatible with HDMI-CEC ∅ 3.
Additional Information Index 24F progressive frame rate . . . . . . . 22, 92 24p Cinema Mode . . . . . . . . . . . . . . . . 47 A Abroad, using the camcorder . . . . . . . 121 Aperture (f number) . . . . . . . . . . . . . . . . 46 Aspect ratio of a connected TV (TV type) . . . . . . . . . . . . . . . . . . . . . . . 97 Audio recording level . . . . . . . . . . . . . . 53 Auto exposure bracketing . . . . . . . . . . . 67 Auto slow shutter . . . . . . . . . . . . . . . . .
Histogram . . . . . . . . . . . . . . . . . . . . . . .67 I Image effects . . . . . . . . . . . . . . . . . . . . .51 Image stabilizer . . . . . . . . . . . . . . . . . . .94 Index screen . . . . . . . . . . . . . . .38, 39, 64 Initialization (hard disk/memory card) . .33 J Joystick . . . . . . . . . . . . . . . . . . . . . . . . .28 Joystick guide . . . . . . . . . . . . . . . . . . . .28 L Language . . . . . . . . . . . . . . . . . . . . . . . .30 LCD screen . . . . . . . . . . . . . . . . . . . . . .
Additional Information Special Scene (recording programs) . . . . . . . . . . . . . 45 Sports (recording program) . . . . . . . . . . 45 Spotlight (recording program) . . . . . . . . 45 Sunset (recording program) . . . . . . . . . 45 T Telephoto . . . . . . . . . . . . . . . . . . . . . . . 36 Timeline . . . . . . . . . . . . . . . . . . . . . . . . . 42 Transfer order . . . . . . . . . . . . . . . . . . . . 89 Transferring to a computer Movies . . . . . . . . . . . . . . . . . . . . . . 82 Photos . . . .
U.S.A. CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY FOR THE UNITED STATES The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to Canon Consumer Digital Video Equipment (the “Equipment”) purchased in the United States. This limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
CANADA CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon Consumer Digital Video Equipment (the “Equipment”) purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Equipment to a Canon Service Facility when repairs are required.
USA CANON U.S.A., INC. NEW JERSEY OFFICE 100 Jamesburg Road, Jamesburg, NJ 08831 USA CANON U.S.A., INC. CHICAGO OFFICE 100 Park Blvd., Itasca, IL 60143 USA CANON U.S.A., INC. LOS ANGELES OFFICE 15955 Alton Parkway, Irvine, CA 92618 USA CANON U.S.A., INC. HONOLULU OFFICE 210 Ward Avenue, Suite 200, Honolulu, Hl 96814 USA ❖ If you have any questions, call the Canon U.S.A. Information Center toll-free at 1-800-828-4040 (U.S.A. only). CANADA CANON CANADA INC.
