Specifications

4-19
Sending Documents
Using Group Addresses
NOTE
– To use this feature, you must register destinations in a group address beforehand. (See “Storing/Editing
Address Book,” on p. 4-27.)
– A maximum of 201 destinations can be specified at the same time. (Out of the 201 destinations, a
number or address can be specified with the numeric keys.) If you specify a group, which is made up of
several destinations, each destination in the group is counted as a separate address.
1 Place the document on the platen glass or load it in the ADF.
2 Press [SEND].
3 Press the one-touch key or [Coded Dial] followed by the three-digit code
under which the desired address group is registered.
If you pressed a wrong key or code, press [Clear], and perform step 3 again.
If you specify a group containing e-mail, I-fax, or file server addresses, you can enter the optional
settings by pressing [OK]. (See “Send Settings,” on p. 4-7.)
Direct TX
01 02 03 04
05 06 07 08
09 10 11 12
Address
Book
Paper
Select
COPY SEND SCAN
Image Quality Density Copy Ratio
OK
Two-Sided
System
Monitor
View
Settings
Reset Collate
GHI
@./
PQRS
To
Additional
Functions
2 on 1
Frame
Erase
Coded
DialRecallHookPause
1
4
7
M4M3M2M1
2
3