Specifications

4-54
Sending Documents
Direct Sending
With direct sending, the machine sends the document on the ADF as it scans
one page, without storing all pages into memory at once. You can send a
document ahead of other documents stored in memory.
NOTE
– You cannot use the platen glass for direct sending.
– You can specify only one destination at a time for direct sending.
– You cannot use group dialing for direct sending. If you specify a group, the direct sending mode is
canceled, and the document is sent in the memory sending mode.
– You cannot use Two-Sided scanning mode for direct sending.
– With direct sending, the machine scans one page into memory at once and sends it right away.
Therefore, when <MEMORY FULL> is displayed, even if you have selected direct sending, wait until
there is enough space in memory to scan one page, or delete the documents in memory, and try again.
(See Chapter 5, “System Monitor,” in the Advanced Operation Guide.)
1 Load the document in the ADF.
2 Press [SEND].
Direct TX
01 02 03 04
05 06 07 08
09 10 11 12
Address
Book
Paper
Select
COPY SEND SCAN
Image Quality Density Copy Ratio
OK
Two-Sided
System
Monitor
View
Settings
Reset Collate
GHI
@./
PQRS
To
Additional
Functions
2 on 1
Frame
Erase
Coded
DialRecallHookPause
1
4
7
M4M3M2M1
2