Specifications

12-3
Maintenance
Scanning area
Keep the scanning area clean to avoid
dirty copies or faxes to be sent.
● Platen glass
1 Open the ADF/platen glass
cover.
2 Clean the platen glass and the
underside of the ADF/platen
glass cover with a cloth
dampened with water. Then wipe
the area with a soft, dry cloth.
NOTE
Do not dampen the cloth too much, as this
may tear the document or damage the
machine.
3 Close the ADF/platen glass
cover.
CAUTION
Be careful not to get your fingers caught.
● ADF
If your documents have black streaks or
appear dirty after copying them using the
ADF, this may be caused by pencil lead
rubbing off the documents and onto the
roller. Clean the ADF scanning area, film,
and roller.
1 Turn off the main power switch
and disconnect the power cord.
2 Open the ADF cover.