Specifications

13-6
Troubleshooting
LCD Messages
See the table below when the LCD displays error messages.
Message Description Action
ADJUSTING
WAITING TO SCAN
The machine is not ready for
scanning.
Wait until the machine is
ready.
AUTO REDIAL This message appears when
the recipient is engaged in
direct sending and the job is
waiting.
Disappears when the
transmission restarts.
CHANGE PAPERSIZE The size of the paper in the
paper drawer or stack
bypass is different from that
of the paper specified in
<REG. PAPER SIZE> or
<BYPASS STD SET> in the
<COMMON SETTINGS>
menu.
– Load the paper of the size
shown on the LCD display.
– If you are trying to print a
report or list, set the paper
size to <LTR> or <LGL>,
then load paper of the
same size.
CHANGE REG’D SIZE
→COMMON SETTINGS
– The size of the paper in
the paper drawer or stack
bypass is different from
that of the paper specified
in <REG. PAPER SIZE>
or <BYPASS STD SET>
in the <COMMON
SETTINGS> menu.
– The paper ran out during
the print job.
– Change the paper size
setting.
– Load paper in the paper
drawer or stack bypass.