Specifications

13-10
Troubleshooting
PLATEN GLASS DIRTY
CLEAN PLATEN GLASS
The ADF scanning area on
the left side of the platen
glass may be dirty.
Clean the ADF scanning
area, then press [OK].
RECEIVED IN MEMORY The machine received the
fax/I-fax in memory because
paper or toner ran out, paper
jams occurred, or incorrect-
size paper was loaded.
Load the correct-size paper
in the paper drawer, replace
the toner cartridge, or clear
the paper jams. For more
information, see the
following:
“Setting Paper Type and
Size,” on p. 3-8
“Replacing the Toner
Cartridge,” on p. 12-9
“Clearing Jams,” on p. 13-1
START AGAIN – A transmission error
occurred because the line
condition was poor.
– The paper jammed or ran
out during printing a
report.
– Check the line condition,
then try again.
– Clear the paper jam, or
replenish the paper, then
try again.
STOP KEY PRESSED
PRESS OK KEY
[Stop] has been pressed
while scanning the
document using the ADF.
Press [OK], then set the
document again.
Message Description Action