Specifications

13-14
Troubleshooting
#0705 The send operation was interrupted
because the size of the image data
is larger than that specified in <MAX
TX DATA SIZE> in <E-MAIL/I-FAX>
in <COMMUNICATIONS> in
<SYSTEM SETTINGS>.
– Change the setting for <MAX TX
DATA SIZE> in <E-MAIL/I-FAX>
in <COMMUNICATIONS> in
<SYSTEM SETTINGS>.
– Select a lower resolution.
– If you are using I-fax, decrease
the number of pages containing
images that you are sending each
time, so that you do not exceed
the Maximum TX Data Size.
– Set <DIVIDE INTO PAGES> to
<ON> in send settings.
#0751 The server is not functioning. The
network is down (the server is
unable to connect to the network or
was disconnected).
– Check the recipient’s address.
– Check that the network is up.
#0752 – The SMTP server name for e-mail
or I-fax is not correct, or the
server is not functioning.
– The domain name or e-mail
address may not be set.
– The network is down.
– Check the SMTP Server name,
domain name, and E-mail
Address in <E-MAIL/I-FAX> in
<NETWORK SETTINGS> in
<SYSTEM SETTINGS>.
– Check that the SMTP server is
operating properly.
– Check the network status.
#0753 A TCP/IP error occurred while
sending an e-mail message.
(Socket, Select error, etc.)
Check the network cables and
connectors. If the machine still does
not operate normally, turn the main
power OFF, and then back ON.
Error Code Description Action