Specifications

14-17
Machine Settings
2. TX SETTINGS Sets the transmission features.
1. ECM TX Sets whether the ECM (Error Correction Mode) transmission
is activated.
–ON
–OFF
2. PAUSE TIME Sets the pause time when you insert pause into the dialing
sequence. (1SEC–15SEC)
3. AUTO REDIAL Sets whether to redial automatically when the other line is
busy or a transmission error occurs. (See Chapter 1,
“Advanced Send Features,” in the Advanced Operation
Guide.)
ON Customizes the redial operation.
1. REDIAL TIMES Sets the number of retries. (1TIMES–10TIMES)
2. REDIAL
INTERVAL
Sets period of time before redialing. (2MIN.–99MIN.)
3. TX ERROR
REDIAL
Sets whether the machine redials automatically when
transmission error occurs.
–ON
–OFF
OFF After the first attempt at dialing fails, redialing is not
attempted.
4. TIME OUT Sets whether to scan a document automatically after
specifying the destination.
* This function is not available when you dial with the
numeric keys.
–OFF
–ON
TX/RX SETTINGS