Specifications

14-19
Machine Settings
4. DRPD:SELECT FAX Selects the ring pattern for fax calls.
– DOUBLE RING
– SHORT-SHORT-LONG
– SHORT-LONG-SHORT
– OTHER RING TYPE
–NORMAL RING
5. INCOMING RING Sets whether the external telephone rings when the
machine receives a voice call or fax, enabling you to answer
the voice call. This function is only available when the <RX
MODE> is set to <FaxOnly> or <FaxTel>.
OFF The telephone does not ring when the machine receives a
voice call or fax. (In the Sleep mode, the telephone may ring
one or two times, if <ENERGY IN SLEEP> in <COMMON
SETTINGS> is set to <LOW>.)
ON The telephone rings when the machine receives a voice call
or fax if an external telephone is connected.
RING COUNT Sets the number of incoming rings before the machine
answers. (1TIMES–99TIMES)
6. REMOTE RX Sets whether to use remote receiving. (See Chapter 1,
“Advanced Send Features,” in the Advanced Operation
Guide.)
ON The machine enables remote receiving.
REMOTE RX ID You can dial a code on remote extension to start receiving a
document.
A combination of two characters using 0 to 9, * and # is
possible.
OFF The machine disables remote receiving.
TX/RX SETTINGS