Specifications

14-35
Machine Settings
ADJUST./CLEANING
Setting Item Description
1. TRANS. ROLR CLEAN Cleans the transcription roller. (See “Transcription Roller,” on
p. 12-7.)
2. DRUM CLEANING Cleans the drum. (See “Drum Unit,” on p. 12-8.)
3. FIX.UNIT CLEANING Cleans the fuser roller. (See “Fuser Roller,” on p. 12-2.)
4. FEEDER CLEANING Cleans the ADF. (See “Cleaning the ADF Automatically,” on
p. 12-6.)
5. SPECIAL MODE M Sets to improve print quality or fix irregular print density. If
print quality decreases or an irregularity in the print density
appears, transcription output may not function adequately.
MID Selects in normal conditions.
LOW Selects to compensate for poor print quality that occurs
when using paper that was stored for a long time at high
temperatures and high humidity.
HIGH Selects to compensate for poor quality that occurs when
using heavyweight paper.
6. SPECIAL MODE N When the two-sided printing function is used, paper may curl
severely or become jammed. Enable this setting to prevent
paper curling or jamming.
–OFF
–ON
7. SPECIAL MODE P Sets to activate when lightweight paper or paper which is
easy to get uneven print density is used for printing.
–OFF
–ON