Specifications

14-48
Machine Settings
7. E-MAIL/I-FAX
1. SMTP RX Sets whether to receive e-mail/l-faxes using the machine’s
own SMTP receiving function.
–OFF
–ON
2. SMTP SERVER Registers the host name of the machine with the DNS
server.
3. POP Sets whether to receive e-mail/l-faxes using a POP server.
–OFF
–ON
4. E-MAIL ADDRESS Enters the e-mail address your machine will use
(max. 64 characters).
5. POP SERVER Enters the POP server IP address or name
(max. 48 characters).
6. POP ADDRESS Enters the login name for access to the POP server
(max. 32 characters).
7. POP PASSWORD Enters the password for access to the POP server
(max. 32 characters).
8. POP INTERVAL Sets the interval you want the POP server to check for
incoming e-mail. If the interval is set to 0, the POP server is
not checked automatically (0MIN.–99MIN.).
9. AUTH/ENC
SETTINGS
Specifies authenticating method before sending e-mail.
1. POP BEFORE
SEND.
Sets whether to use the SMTP server requires POP before
SMTP (method for authenticating users who have logged in
the POP server before sending e-mail).
–OFF
–ON
2. SMTP AUTH Sets whether to use the SMTP server requires SMTP
Authentication (method for authenticating users who have
logged in the POP server before sending e-mail).
–OFF
–ON
8. STARTUP TIME SET. Sets the time period required to delay the startup of network
communications for the machine (0–300SEC).
SYSTEM SETTINGS