imageCLASS D340 Set-Up Sheet

ManualsBrandsCanon ManualsCopierimageCLASS D340

Setup Sheet

Thank you for purchasing the Canon imageCLASS D340.

To get your machine ready for use, please follow the instructions in this Setup Sheet before referring to any

Summary of content (8 pages)

PAGE 1
Setup Sheet Thank you for purchasing the Canon imageCLASS D340. To get your machine ready for use, please follow the instructions in this Setup Sheet before referring to any other documentation. Unpack the machine and its components.
PAGE 2
Removing Shipping Materials 1 Place the machine on a flat surface. 2 Remove the shipping tapes on the machine and cassette/multi-purpose tray. NOTE • DO NOT remove the transparent USB label at this stage Transparent USB label Left side view 3 Open the ADF to remove the shipping material , then open the platen glass cover to remove the inner protection sheet .
PAGE 3
Connecting the Power Cord When the power cord is plugged into the machine and into the wall outlet, the machine is turned on. There is no separate ON/OFF power switch. Once connected, the machine needs to warm up before you can use it. The LCD displays PLEASE WAIT, then INSTALL CARTRIDGE. The LCD returns to the standby display when you install the cartridge and load paper in the cassette or multi-purpose tray.
PAGE 4
Installing the Cartridge 1 Remove the new cartridge from its protective bag. NOTE • Save the protective bag. You may need it later when you remove the cartridge. 2 Rock the cartridge 5 or 6 times to distribute the toner evenly. Instructions Drum protective shutter NOTE • Always hold the cartridge as shown so that the side with the instructions are facing upward. Do not forcefully move or push the protective shutter of the drum in any way.
PAGE 5
6 Hold the cartridge and position the arrow mark on the cartridge towards the inside of the machine shown below. 7 Align the projections on both sides of the cartridge to the guides in the machine (location 1) and gently slide the cartridge into the machine until the right cover slightly rises up (location 2). IMPORTANT • The right cover moves simultaneously with the action of the cartridge. Do not push the cartridge farther than the location 2.
PAGE 6
Installing User Software (Windows 98/Me/2000/XP) IMPORTANT • Before you can print, you must install the user software on your computer. Screen shots in the following installation procedures are for Windows 98. 1 Make sure the USB cable is NOT connected to your machine and computer. IMPORTANT • If the Plug and Play is automatically carried out and the Found New Hardware Wizard appears, click Cancel, and follow this procedure. 2 Insert the CD-ROM into your CD-ROM drive.
PAGE 7
6 Check Install Printer Driver through a USB Connection, then click Next> . When the screen (on the upper right) appears, follow the procedure below 6-1 Be sure to remove the transparent USB label 6-2 Connect the USB cable . to the machine and computer. The program will start installing the Printer Driver automatically. USB interface connection 7 When the following screen appears, select Yes, I want to restart my computer now. Then click Exit.
PAGE 8
Reading Electronic Manuals To see the guides, proceed as follows. 1 Insert the CD-ROM into your CD-ROM drive. 2 On the Windows desktop, click Start, and then Click Run... 3 In the Run dialog box, type D:\Manuals and click OK ( where D: is the CD-ROM drive containing the installation disk ). The Printer Guide is available in the manuals folder. NOTE • If you do not have Adobe Acrobat Reader installed on your computer, follow the procedure below to install it. 1 Insert the CD-ROM into your CD-ROM drive.