D761 Reference Guide

ManualsBrandsCanon ManualsCopierimageCLASS D780

4-1

For information on the types of documents you can copy, their requirements, and details on setting up documents,

→ Chapter 3.

Copying Documents

Documents You Can Copy

Making Copies

Chapter 4

Press COPY to set to Copy Mode.

• For the imageCLASS D760/D761 models,

this operation is not required.

Ex:

Prepare the document and place it on the

platen glass or load it face down in the

ADF. (→ pp. 3-3, 3-4)

You can choose to set the below copy

features.

• Copy quantity (→ p. 4-3)

• Paper feeding location (cassette or multi-purpose

tray) (→ pp. 2-3, 2-6)

• Enlarging/reducing (→ p. 4-5)

• Image quality (→ p. 4-6)

• Exposure (→ p. 4-6)

• Collate (→ p. 4-7)

• 2 on 1 (→ p. 4-9)

• Please note that you cannot change settings

during copying.

Press Start to begin copying.

Ex:

• If the paper in the cassette or multi-purpose tray runs

out during copying, the LCD displays SUPPLY

REC. PAPER. Load paper in the cassette or load

paper in the multi-purpose tray when it is used to

feed paper. When paper is loaded, the machine

automatically resumes copying.

• If you load paper while making copies, do

not load a different paper size.

• You can reserve the next copy job while the

machine is outputting copies. (→ p. 4-11)

• After the machine finishes copying, the

setting will remain. However, if you press

Stop/Reset or if no key is pressed for 2

minutes, the paper feeding location will be

reset to the cassette, and other settings will

also be reset to the default settings. (The

time until the machine enters the AUTO

CLEAR mode can be specified. (→ p. 7-

4))

• The capacity of the output tray is 100

sheets (20-lb bond / 80 g/m

) of paper. To

prevent paper jams, remove paper from the

output tray before the count reaches 100 .

SCANNING

COPY NO. 0001

100% LTR

TEXT

04 RG_Chap4.qxd 03.7.10 3:33 PM Page 4-1