imageCLASS D800 Series Set-Up Instructions

ManualsBrandsCanon ManualsCopierimageCLASS D880

Set-Up Instructions

Thank you for purchasing Canon imageCLASS D800 Series.

To get your machine ready for use, please follow the instructions in this document before referring to any other documentation.

Series

Unpack the machine and its components.

Check that you have the following:

• Power cord

• Telephone cable*

• Documentation

Set-Up Instructions

Basic Guide

Fax Guide*

Registration Card**

Limited Warranty Notice

• CD-ROM

* imageCLASS D880 Model

** U.S.A. only

Slide the platen unit

to the left until the

I4 mark appears.

Remove the shipping

material.

Lift the platen unit

lever

1 and slide the

platen unit to the left

Open the cartridge

cover.

Machine

Output tray

L50 S-Cartridge

Destination labels*

3 4

Remove the shipping materials.

Place the machine on a flat surface.

Remove

all shipping tapes from the exterior of the machine.

E111MB Set-Up Sheet.qxd 6/21/04 9:11 AM Page 1

Summary of content (8 pages)

PAGE 1
E111MB Set-Up Sheet.qxd 6/21/04 Series 9:11 AM Page 1 Set-Up Instructions Thank you for purchasing Canon imageCLASS D800 Series. To get your machine ready for use, please follow the instructions in this document before referring to any other documentation. Unpack the machine and its components.
PAGE 2
E111MB Set-Up Sheet.qxd 6/21/04 9:11 AM Page 2 Install the cartridge. 1 Remove the cartridge from its bag. 3 Place the cartridge on a flat and stable surface, grip the sealing tape tab, and snap in the direction shown. Make sure that the tab is detached from the cartridge. 5 Remove the sealing tape completely. 2 Rock the cartridge several times to distribute the toner evenly. 4 Grasp the cartridge with one hand, firmly and slowly pull out the sealing tape tab with the other hand.
PAGE 3
E111MB Set-Up Sheet.qxd 6/21/04 9:11 AM Page 3 Attach the output tray. 1 Hook the tab on the output tray onto the opening on the left side of the machine. Connect the telephone cable and any necessary external device. (Only for the imageCLASS D880 model) Connect external devices as follows: L : Telephone line jack : External device jack •Telephone or answering machine Telephone line Telephone line cord Connect the supplied telephone line to the L jack.
PAGE 4
E111MB Set-Up Sheet.qxd 6/21/04 9:11 AM Page 4 Connect the power cord. When the power cord is plugged into both the machine and a power outlet, the machine will turn on. The LCD displays PLEASE WAIT. Please wait until the LCD display returns to the Copy Mode standby display. Connect the supplied power cord to the power cord connector on the left side of the machine. Then connect the other end into a properly grounded standard 120 V three-prong outlet.
PAGE 5
E111MB Set-Up Sheet.qxd 6/21/04 9:11 AM Page 5 Enter the Date and Time. 1 2 Press Additional Functions. Use 4 (–) or e (+) to select 5.TIMER SETTINGS. 3 Press Set twice. The date and time currently set for the machine are displayed. ex: Use the numeric keys to enter the correct month, day, year and time in this order. • Use 4 (–) or e (+) to move the cursor under the number you want to change, then enter the correct number. • Enter only the last two digits of the year.
PAGE 6
E111MB Set-Up Sheet.qxd 6/21/04 9:11 AM Page 6 Install the printer driver (CAPT). For parallel connection: 1 2 3 4 Make sure that the computer is turned off, and that the parallel cable is securely connected to the machine and the computer. Plug the machine’s power cord into a power outlet to turn it on. Turn the computer on and start Windows. Plug and Play will activate and the Found New Hardware Wizard (in Windows 95, New Hardware or Device Wizard) dialog box appears. Click Cancel.
PAGE 7
**E111MB Set-Up Sheet.qxd 7/20/04 2:39 PM Page 7 5 Click Canon iC D800 Install. 6 Select Local printer attached to this computer, then click Next. The Add Printer Wizard dialog box appears. Click Next. 7 Select Use the following port. Select the printer port the machine is connected to (usually LPT1: (Recommended Printer Port)), then click Next. The printer port selection dialog box appears. Automatically detect and install my Plug and Play printer is not recommended.
PAGE 8
*E111MB Set-Up Sheet.qxd 15 7/21/04 1:22 PM Page 8 When installation is complete, the following dialog box appears. Click OK. 16 If you opted to print a test page, the test page will be printed after the installation is complete. If the test page is printed correctly, click Yes on the dialog box that appears. For installation instructions under Windows 2000/NT 4.0 → Printer Guide For USB connection: 1 2 3 Make sure that the computer is turned off.