Owner manual
Handling sheets
Loading heavyweight paper in the Front Paper Feed Slot
Important
• Before loading heavyweight paper , change the media type setting to POP Board . When POP Board is
selected as the type of paper , Front Paper Feed Slot is automatically selected.
• Always load a POP Board in the Front Paper Feed Slot . Loading it another way may damage the
printer or cause malfunction.
Note
• Y ou can load only one sheet of paper at a time.
• Store unused paper in the original package, away from high temperature, humidity , and direct sunlight.
• If the paper is warped, straighten it before loading it.
• Load the paper straight. Loading paper askew will cause an error .
• After loading the paper , you cannot move it laterally to reposition it. Be sure to load the paper straight.
1. If you send a print job specifying POP Board from a computer beforehand, the type and size
of paper are shown on the Display Screen .
Note
• If you will load paper before sending a print job, press the Feeder Selection button to illuminate
the Paper T ray lamp . A screen is shown on the Display Screen for selection of the paper type.
Press ◄ or ► to select POP Board , and then press the OK button.Next, a menu for selection of
the paper size is shown on the Display Screen . Press ◄ or ► to select the size of paper , and
then press the OK button.
• For details on types of paper , see the Paper Reference Guide . ( → P .103)
• Be sure to select the correct paper type. If this setting does not match the type of paper loaded, it
may cause feed errors and af fect the printing quality .
2. Check the space behind the printer when the following message is displayed, and then press
the OK button.
Chk Back Space
Press OK
Note
• Suf cient space behind the printer is required when loading paper in the Front Paper Feed Slot . For
details on the space required for installation, see “Specications”. (→P .73)
Handling Paper 161