Owner manual
Network Setting
Conguring the IP Address Using the Printer Control
Panel
This topic describes how to congure the printer ’ s IP address on the Control Panel .
1. Press the Menu button to display MAIN MENU .
2. Press ◄ or ► to select Interface Setup , and then press ▼ .
MAIN MENU
Interface Setup ↓
3. Press ◄ or ► to select TCP/IP , and then press ▼ .
Interface Setup
TCP/IP ↓
4. Press ◄ or ► to select IP Setting , and then press ▼ .
TCP/IP
IP Setting ↓
5. Press ◄ or ► to select IP Address , and then press ▼ .
IP Setting
IP Address ↓
6. Press ◄ or ► to move the cursor (_) to each eld for entering IP address numbers.
IP Address
=0.0.0.0
7. Press the OK button to prepare to enter the number .
8. Press ◄ or ► to select the number , and then press the OK button.
IP Address
=xxx.0.0.0
Note
• Pressing the ◄ button decreases the number by 1. The minimum value is “0,” after which “255” is
displayed.
• Pressing the ► button increases the number by 1. The maximum value is “255,” after which “0” is
displayed.
• Hold down ◄ or ► to increase or decrease the value continuously .
9. Repeat steps 6-8 to enter the IP address assigned to the printer .
IP Address
=xxx.xxx.xxx.xxx
Network Setting 541