Owner manual

Responding to Messages
Error Messages
W arning messages
The printer status is indicated on the top line of the Display Screen , and the warning message on the bottom
line of the Display Screen .
Although warning messages do not prevent printer operation, you should check the message and take
the appropriate action.
GARO Wxxxx (x represents a number) (→P .697)
GL2:Wxxxx (xxxx is 0501, 0903, or 0904) (→P .696)
GL2:W0502 (→P .696)
GL2:W0504 (→P .696)
GL2: Unsup. papr (→P .696)
Ink Lvl: Chk xx (xx represents an ink color) (→P .691)
Check Printout (→P .694)
Feed Limit.. (→P .688)
Consumables Low (→P .697)
Repl Consumables (→P .697)
MTCart Full Soon (→P .695)
Paper Mismatch (→P .678)
PaprSiz Mismatch (→P .679)
PaprT yp Mismatch (→P .678)
Error messages (if action can be taken)
Check the message and take the appropriate action.
GL2: Unsup. papr (→P .696)
Need 10 in or Larger Roll (→P .680)
Need A4/Letter V ert. or Larger (→P .680)
No Ink Left (→P .690)
Ink T ank / Check xx (xx represents an ink color) (→P .691)
Ink T ank / Replace xx (xx represents an ink color) (→P .692)
Close UpperCover (→P .697)
Online Key / and recalibrate (→P .693)
Load Papr in Cas / Press Online. (→P .684)
Cassette Undetected (→P .684)
Cassette Selectd / Press Key (→P .684)
Media Check / Please Cancel (→P .679)
Paper Feed Slot / SpcfdPapr NotFit (→P .684)
Check Supported Paper . (→P .689)
Sheets Loaded / Press T o Eject (→P .682)
T ray Selected (→P .683)
Power On / Again (→P .698)
Power On / Again / Multi-sensor Err (→P .698)
Not Enough Ink (→P .690)
Cannot update rmware (→P .698)
Printhead / Please Replace (→P .694)
Printhead / Check Nozzles (→P .694)
Maint Cartridge / Replace Cart (→P .695)
Maint Cartridge / Load Cartridge (→P .695)
676 Error Message