Owner manual

Messages regarding paper
Roll Paper / Please Replace
Paper Level Low / Replace Paper
Cause Corrective Action
Hold down the Stop/Eject button for a second or
more to cancel printing, then follow these steps to
replace the roll.
1. Remove the roll.
( P .1 19)
( P .120)
( P .121)
2. Load a roll with enough paper left.
( P .1 14)
( P .1 16)
( P .1 17)
3. If no barcode was printed on the roll, specify the
paper type.
( P .1 12)
4. Specify the paper length, unless a barcode has
been printed on the roll and you have deactivated
the automatic detection function of the remaining
roll paper .
( P .1 13)
The printer has received a print job longer than the
amount of roll paper left.
Press the Online button to continue with printing.
However , the roll paper may run out during the
print job and you may not be able to print all of the
document.
Paper Not Loaded / Press Key
Cause Corrective Action
The roll is empty . Follow the steps below to replace the used roll with a
new roll of the same type and size.
1. If the last paper on the roll has not been ejected,
follow the steps below .
1. Press the button.
2. Remove the roll.
( P .122)
3. Press the button.
2. Load a new roll.
( P .1 14)
( P .1 16)
( P .1 17)
3. If no barcode was printed on the roll, specify the
paper type.
( P .1 12)
4. Select the paper length, unless a barcode has
been printed on the roll or you have deactivated
the automatic detection function of the remaining
roll paper .
( P .1 13)
Error Message 681