Owner manual

Messages regarding printing or adjusment
Messages regarding printing or adjusment
Paper T ype / Please Change
Cause Corrective Action
W e recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
( → P .581)
The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.
Adjust the feed amount manually .
( → P .590)
Online Key / and recalibrate
Band Adj Error / Please Readjust
Cause Corrective Action
The feed amount cannot be adjusted; highly
transparent lm is loaded.
Adjust the feed amount manually .
( → P .590)
Printhd Adj Err / Please Readjust
Cause Corrective Action
The Printhead nozzles are clogged. Follow the steps below to check the nozzles.
1. Print a test pattern to check the nozzles.
( → P .608)
2. Clean the Printhead if the nozzles are clogged.
( → P .610)
The Printhead cannot be aligned; highly transparent
lm is loaded.
W e recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
( → P .581)
Error Message 693