Owner manual

Printer Specications
Printer Specications
Specications
Important
• This information is subject to change as the printer is updated.
• The following values may vary depending on the operating environment.
Printer
Power supply 100-120 V AC (50/60 Hz), 220-240 V AC (50/60 Hz)
In operation 100 W max.
Sleep mode 100-120 V : 5 W max.
(10 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
220-240 V : 6 W max.
(1 1 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
Power consumption
Of f 1 W max. ( *1 )
Operating noise Approx. 52 dB (A) max.
T emperature 15-30°C (59-86°F)Operating
environment
Humidity 10-80%, non-condensing
Printer only 819×733×317 mm (32.2×28.9×12.5 in)Dimensions (W × D
× H)
Printer and Roll
Feed Unit
819×810×344 mm (32.2×31.9×13.5 in)
Printer only 39 kg (86 lb)W eight
(not including the
Printhead and Ink
T ank )
Printer and Roll
Feed Unit
(not including rolls)
43 kg (94.8 lb)
Printer only 1,1 19×1,833×617 mm (44.1×72.2×24.3 in)Space required for
installation ( *2 )
Printer and Roll
Feed Unit (not
including rolls)
1,1 19×1,910×644 mm (44.1×75.2×25.4 in)
Applicable standards International Energy Star Program, Law on Promoting Green
Purchasing, GPN, RoHS, IT Eco Declaration, WEEE, U.S.
presidential directives
*1: The printer uses a trace amount of power even when turned of f. T o stop all power consumption,
turn of f the printer and unplug the power cord.
*2: Normally , you will need to ensure an unobstructed space of 800 mm (31.5 in) in front of the printer , 300
mm (1 1.8 in) behind, 150 mm (5.9 in) on both sides, and 300 mm (1 1.8 in) above the printer . Only
when printing from the Front Paper Feed Slot , leave 800 mm (31.5 in) of unobstructed space in front
of the printer and 400 mm (15.7 in) behind it.
Printer Parts 73