Service manual

(12/25)

At Logic board replacement, make settings for each destination.

The number of the Reset

button pressing

LED Destination Paper for defaulte setting

0 time Green No change

1 time Orange Japan A4

2 times Green Korea A4

3 times Orange US Letter

4 times Green Europe A4

5 times Orange Australia A4

6 times Green Asia A4

7 times Orange China A4

8 times Green Taiwan A4

9 or more times Returns to a menu selection A4

At the waste ink absorber replacement, reset the waste ink counter for the replaced waste ink absorber.

Setting operation for the waste ink counter (The counter setting value is selected by pressing the Reset button.)

The number of the Reset button

pressing

LED

0 time Green Reset the main waste ink counter to 0%.

1 time Orange Reset the platen waste ink counter to 0%.

2 times Green Reset the Main & platen waste ink counter to 0%. (Reset

collectively.)

At Operation panel unit replacement, check the button / LCD.

1. When the Stop Reset button is pressed, FEMS<>BP will be displayed on the monitor.

2. Each button (excluding the Power / OK / Stop/Reset button) will be off by pressing each button.

3. When all buttons excluding the Power / OK / Stop/Reset button are pressed, PASS will be displayed.

4. When the Power button is pressed, the printer returns to a service mode menu selection.