Service manual

(9/25)
3-2. Service Call Error (Cyclic Blinking in Orange (Alarm LED) and Green (Power LED))
Cycles of blinking
in orange and
green
Error Corrective Action
2 times Carriage error [5100] Replace the printer as it has failed.
3 times Paper feed error [6000] Replace the printer as it has failed.
4 times Purge unit error [5C00] Replace the printer as it has failed.
5 times ASF(cam) sensor error [5700] Replace the printer as it has failed.
6 times Internal temperature rise error [5400] Replace the printer as it has failed.
7 times Waste ink absorber full or platen waste ink
absorber full [5B00]
Replace the printer as it has failed.
8 times Ink cartridge temperature rise error [5200] Replace the printer as it has failed.
9 times EEPROM error [6800] Replace the printer as it has failed.
13 times Paper feed position error [6B00] Replace the printer as it has failed.
15 times USB Host VBUD overcurrent error [9000] Replace the printer as it has failed.
17 times
Abnormal motor driver error [6Ｄ00]
Replace the printer as it has failed.
20 times Other hardware error [6500] Replace the printer as it has failed.
Continuous
alternate blinking
ROM error Replace the printer as it has failed.
Alarm LED
(orange) lit
ROM error Replace the printer as it has failed.
3-3. Ink Low Warning (Ink low warnings are displayed by the Status Monitor only when the remaining ink
level detection is enabled, and no Status Monitor display when disabled.)
Note: The Status Monitor display in the table below is for Windows.
Warning Display by Status Monitor
Ink low warning 1 (approx. 70% of ink remaining)
Ink low warning 2 (approx. 40% of ink remaining)
Ink low warning 3 (low remaining ink)
Ink low warning 4 (no ink remaining)