Instruction manual

12
Step
2
2
Remove the tape and packing materials shown in the figure
in the direction of the arrow.
For the packing material on the left, remove the tape
a
, then remove the packing
material in the direction of the arrow b .
Remove the tape shown in the figure.
IMPORTANT
•
If there is any packing material remaining inside the printer, this may result
in poor print quality or damage to the printer when operating the printer. Be
sure to remove all the packing materials following the procedure.
•
The removed packing materials are required when transporting the printer
for relocation or maintenance. Keep them where they will not get lost.
3
Take the toner cartridge out of the protective bag.
There are cuts on both sides of the protective bag, so you can open it by hand.
IMPORTANT
Keep the protective bag for the toner cartridge. It may be required after
taking out the toner cartridge for printer maintenance.
4
Pull up the tape gently while supporting the toner cartridge
a , then remove it together with the black protective sheet
b .
a
b
b
a