Instruction manual
32
Step
5
If you are using Windows XP Service Pack 2 or another operating system
equipped with Windows Firewall, the following screen is displayed. Specify whether
to configure Windows Firewall to unblock communication with the client computers
when sharing the printer on a network.
Click [Yes] when you share the printer on a network. After completing the
installation, see "Chapter 3 Setting Up the Printing Environment" in User's
Guide and specify the settings for sharing the printer on the network.
Click [No] when you do not share the printer on a network.
NOTE
Even after the installation, you can change the Firewall settings using
"CAPT Windows Firewall Utility" in the supplied CD-ROM. For more
details, see "Chapter 8 Appendix" in User's Guide.
11
The message <Installation cannot be stopped once it starts.
Do you want to continue?> appears. Click [Yes].
NOTE
• If you are using Windows 2000 and the [Digital Signature Not Found]
dialog box appears, click [Yes].
• If you are using Windows XP/Server 2003 and the [Hardware Installation]
dialog box appears, click [Continue Anyway].
• If you are using Windows Vista and the [Windows Security] dialog box
appears, click [Install this driver software anyway].
12
When the following screen is displayed, turn the printer ON.
Press " " of the power switch to turn the printer ON.
Installation of the USB class driver and the printer driver starts automatically.
NOTE
• If the printer is not recognized automatically even after the USB cable is
connected, see "Chapter 7 Troubleshooting" in User's Guide.
• If you are using Windows XP/Server 2003 and the [Hardware Installation]
dialog box appears, click [Continue Anyway].
• If you are using Windows Vista and the [Windows Security] dialog box
appears, click [Install this driver software anyway].
CD-ROM
CD-ROM
CD-ROM