Instruction manual

40
Step
6
Installation Space
The dimensions of each part, foot positions, and the space required for using
the printer with the paper feeder installed are indicated in the following
figures:
Moving the Printer
When installing the paper feeder in the printer after installing the printer,
move the printer to an appropriate location temporarily using the following
procedure.
WARNING
Be sure to turn the printer and computer OFF, unplug the power plug,
and then disconnect all the interface cables from the printer before
moving the printer. Otherwise, the power cord or interface cables
may be damaged, resulting in a fire or electrical shock.
CAUTION
Do not carry the printer with the paper cassette attached. If you do
so, the paper cassette may drop resulting in personal injury.
1 Turn the printer and computer OFF a, remove the USB
cable b, and then disconnect the power plug from the AC
power outlet c.
438.732.6
406.1 473.1
121.6
172.293.8
184
88.6
40.6
518
401.1 415.7
325
100 100
1228.7
465
718
673.1
200
332 21157.9
332 21157.9
408.186.4 408.186.4 23.5
23.5
The rubber feet are 1 mm high and their top surface is 12 mm x 12 mm square.
Tray Extension
Auxiliary Tray
Multi-purpose Tray
Sub-output Tray
Auxiliary Tray
Tray Extension
Auxiliary Tray
• Required Peripheral Space
• Dimensions of the Printer
Front Surface
Front Surface
(mm)
(mm)
(mm)
• Foot Positions of the Paper Feeder
Front Surface
c
a
b
a