Instruction manual

5
● Install the printer in the following locations.
-A location where sufficient space can be secured
-A well-ventilated room
-A flat, even surface
-A sturdy platform that can easily support the weight of the printer and optional
accessories
WARNING
Do not install the printer near alcohol, paint thinner, or other
flammable substances. If flammable substances come into contact
with electrical parts inside the printer, it may result in a fire or
electrical shock.
CAUTION
•
Do not install the printer in the following locations, as this may result
in a fire or electrical shock.
-A damp or dusty location
-A location exposed to smoke and steam such as cookeries and
humidifiers
-A location exposed to rain or snow
-A location near water faucets or water
-A location exposed to direct sunlight
-A location subject to high temperatures
-A location near open flames
•
Do not install the printer in unstable locations, such as unsteady
platforms or inclined floors, or in locations subject to excessive
vibrations, as this may cause the printer to fall or tip over, resulting in
personal injury.
IMPORTANT
Do not install the printer in the following locations, as this may result in
damage to the printer.
-An environment where the temperature and/or humidity can change
dramatically, or where condensation occurs
-A poorly ventilated room
-A location near products that generate magnetic waves or
electromagnetic waves
- In rooms such as laboratories where chemical reactions occur
-A place where salt content, corrosive gases such as ammonia, or toxic
gases are contained
-A platform that may warp from the weight of the printer and optional
accessories, or the printer is liable to sink (such as a carpet or mat)
Dimensions of the Printer
The dimensions of each part of the printer are indicated in the following figures:
For details on the dimensions of the printer with the optional paper feeder
installed, see "Installing the Paper Feeder," on p. 39, and for the dimensions
with the duplex unit installed, see "Installing the Duplex Unit," on p. 47.
Installation Space
Select an installation location where you can secure the following amounts of
free space around the printer, and a surface that can support the weight of the
printer. The dimensions of the space required around the components and the
positions of the feet are as follows. For details on the installation space of the
printer with the optional paper feeder installed, see "Installing the Paper
Feeder," on p. 39, and for the installation space with the duplex unit installed,
see "Installing the Duplex Unit," on p. 47.
Front Surface
(mm)
121.6
172.293.8
438.732.6
184
88.6
40.6
277
344
272
286.6
518
Tray Extension
Auxiliary Tray
Multi-purpose Tray
Auxiliary Tray
Sub-output Tray
Auxiliary Tray
Tray Extension
Front Surface
• Required Peripheral Space
• Printer unit only
(mm)
325
100 100
1193.7
430
718
544
200