Instruction manual

50
Step
6
Network Board
Install the network board in the expansion slot located on the rear of the
printer.
*For NB-C2, a CD-ROM may be supplied with the network board.
By installing the optional network board, you can use LBP3500 directly
connected to a network.
CAUTION
• Be sure to turn the printer OFF, unplug the power plug, and then
disconnect all the interface cables and power cord from the printer
before installing the network board. If a USB cable is connected, turn
the computer off, and then remove the USB cable. If you attempt to
install the network board when the printer is ON or any cable is
connected to the printer, this may result in an electrical shock.
• Be careful when handling the network board. Touching the edges or a
sharp portion of the network board may result in personal injury.
IMPORTANT
• The network board contains components that are sensitive to static
electricity. Observe the following precautions when handling the network
board to prevent damage from static electricity.
-Touch a metal object to dissipate static electricity before handling the
network board.
-When handling the network board, do not touch anything that generates
static electricity such as the computer display.
-Do not touch the network board parts, printed wire, or connectors with
your hands.
-To prevent the network board from being affected by static electricity,
keep it in the protective bag until it is ready to be installed. The protective
bag is required after the network board is removed. Keep the protective
bag and do not discard of it.
NOTE
This network board does not come with a LAN cable. A Category 5 twisted
pair cable is required for installing the network board and connecting the
printer to a network. Have cables or a hub ready as needed.
Network board
Screws
(2 pieces)
Guide booklet Ferrite core
(Only for NB-C1)
ERR LNK 100
Print server
Client
Client
Client
Client
Connecting the network board on the printer directly to the computer
Connecting the printer to the computer via a print server
LBP3500
(Network board installed)
LBP3500
(Network board installed)
:TCP/IP
:TCP/IP
:
Usable Protocols