Instruction manual

6
System Environment
Operating system software
•Windows 2000 Server or Professional
•Windows XP Professional or Home Edition
•Windows XP Professional x64 Edition
•Windows Server 2003
•Windows Server 2003 x64 Editions
•Windows Vista (32-bit or 64-bit version)
•Windows Server 2008 (32-bit or 64-bit version)
•Windows 7 (32-bit or 64-bit version)
✝ For details on the procedures, instructions, and so on for Windows 7 and Server
2008, refer to those for Windows Vista.
✝ For details on the latest status of the supported operating systems and Service
Pack, see the Canon website (http://www.canon.com/).
•System Requirements (minimum required)
(PC/AT Compatibles)
*1 As the amount of available memory varies depending on the system configuration of the
computer or application you are using, the above environment does not guarantee printing in
all cases.
*2 This indicates free hard disk space required for installing the printer driver and manuals using
Easy Installation. Required free hard disk space varies depending on the system
environment or installation method.
•System Requirements (recommended)
Interface
When connecting with USB
USB 2.0 Hi-Speed/USB Full-Speed (USB1.1 equivalent)
When connecting to a network (Requires the optional network board.)
•Connector: 10BASE-T or 100BASE-TX
•Protocol: TCP/IP
• When all the optional accessories are installed (paper feeder + duplex unit)
Front Surface
(mm)
325
100 100
1228.7
465
718
673.1
200
Front Surface
• Foot Positions
The rubber feet are 1 mm high and their top surface is 12 mm x 12 mm square.
(mm)
312.1 20.7105.9
313.6 20.7104.4
39588.4 34.6
364.4109.2 44.4
Windows 2000/XP/Server 2003
Windows Vista
CPU
Pentium II
300 MHz or more
Conforms to the
minimum system
requirements for
Windows Vista
Memory (RAM) *
1
128 MB or more
Hard Disk *
2
120 MB or more 120 MB or more
Windows 2000/XP/Server 2003 Windows Vista
CPU
Pentium III
600 MHz or more
Conforms to the
recommended system
requirements for
Windows Vista
Memory (RAM) 256 MB or more