User`s guide

Try Scanning
10
8
Select the [Output Size].
You can select from the following options.
If you selected [Print] in Step 7:
Flexible / 4"x6" / A4 / Letter / Custom Settings
If you selected [Image display] in Step 7:
Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 /
2048 x 1536 / Custom Settings
With the [Flexible] option, the scan area enclosed by the
dotted line (cropping frame) will be scanned at the same scale
as the original. You can change the cropping frame.
If you selected [Print] in Step 7, you can select the 4" x 6", A4,
Letter, and Custom Settings options. Expand or decrease the
cropping frame to correspond to the size of the paper for
printing.
If you selected [Image Display] in Step 7, you can select an
output size in pixels to match the sizes used by computer monitors and digital cameras.
9
Click [Scan].
The final scan will start.
10
Click close box (Windows) or (Macintosh) in
the ScanGear CS window to close it.
The scanned image will appear in the PhotoStudio window.
11
Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder
where you wish to store the image file, enter a file name,
select a file type (JPEG format is recommended) and click
[Save].
12
Click close box (Windows) or (Macintosh) in
the PhotoStudio window to close it.
If the scanner does not perform as described above, read the "Troubleshooting" section
of the Scanning Guide (HTML format manual).
For details about the bundled software programs, read the Scanning Guide or the User’s
Guide (PDF format manual) for each software program on the CanoScan Setup Utility
CD-ROM.