User`s guide

Connect the Scanner

English

Connect the Scanner

Peel the caution seal from the back of the scanner.

Connect the scanner to the computer with the supplied USB interface cable.

Using the Scanner in the Upright Position

Installing the Stand Removing the Stand

Positioning an item

• Make sure that the scanning unit is unlocked. (P. 6)

• Only use the USB interface cable provided with the scanner. Use of other cables may

lead to a malfunction.

• The scanner does not have a power switch. The power is activated as soon as the

computer is turned on.

• When the scanner is connected to the USB 1.1 port on Windows XP, do not worry if the

"HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub" message appears. You can

operate the scanner in this condition without problems.

USB Interface Cable

Wide Flat Connector

Small Square Connector

USB Connector

Removing the stand.

Press the hook.