Basic Serial Functional Specification for LV-5210/7215/7210 LV-5210/7215/7210 BASIC SERIAL FUNCTIONAL SPECIFICATION Page 1
Basic Serial Functional Specification for LV-5210/7215/7210 -CONTENT1. Overview 2. Serial Interface Specification 2.1 Transfer Specification 2.2 Connection 3. Notes for Communication 4. Functional Execute Command Table 5. Status Read Command Table 6. Functional Execution Command Table 6.1 Format 6.2 When the command pipelining is needed 6.3 Transfer Example 6.4 Operation Requirements 6.5 POWER ON Command 6.6 POWER OFF Command (Quick POWER OFF) 6.7 POWER OFF Command 6.8 Computer 1 Command 6.
Basic Serial Functional Specification for LV-5210/7215/7210 6.29 Computer 2 RGB Command 6.30 Computer 2 Scart Command 6.31 IMAGE (Toggle) Command 6.32 ON START SETTING COMMAND 6.33 ON START CANCELLATION COMMAND 6.34 Power management Ready Command 6.35 Power management OFF Command 6.36 Power Management Shut Down Command 6.37 D.ZOOM + COMMAND 6.38 D.ZOOM - COMMAND 6.39 Video Auto COMMAND 6.40 Video S-Video COMMAND 6.41 Video S-Video COMMAND 6.42 POINTER RIGHT COMMAND 6.43 POINTER LEFT COMMAND 6.
Basic Serial Functional Specification for LV-5210/7215/7210 7.6 Setting Command 7.
Basic Serial Functional Specification for LV-5210/7215/7210 1 Overview 1.1 This Specification defines projector control commands for LV-7215/7210 /LV-5210 (0.8 “ XGA second model) / 0.8 SVGA second model) 1.2 The projector control commands are for controlling projector through RS232C from a computer. 2 Serial Interface Specification 2.1 Transfer Specification Specification 2.
Basic Serial Functional Specification for LV-5210/7215/7210 3 Notes for Communication 3.1 The projector command is defined one command/one line that starts “C” and ends carriage return (0x0D). 3.2 There are two types of command, functional execution commands and state read commands. Example of Functional Execution Command: “C05” [CR] Example of State Read Command: “CR0” [CR] When it takes more than one second to receive on command, it clears information of buffer.
Basic Serial Functional Specification for LV-5210/7215/7210 4 Functional Execution Command Table Command C00 Command Item C2A Power Management Ready C2B Power Management OFF C02 POWER OFF C2E Power Management Shut down C05 Computer 1 (MC/W/N) C30 D.ZOOM + C06 Computer 2 C31 D.
Basic Serial Functional Specification for LV-5210/7215/7210 6 Functional Execution Command Table 6.1 Format 6.1.1 PC issues a command as below format “C” COMMAND [CR] Command: 2 characters (See Functional Execution Command Table) 6.1.2 A projector changes received data to decode and sends a return result after being ready to receive next command. [ACK] [CR]: (0x06、0x0D)When received functional execution commands. 6.1.3 “?” [CR]: When cannot read received data 6.
Basic Serial Functional Specification for LV-5210/7215/7210 6.4 Operation Requirements When the projector’s status in this below, functional execution commands are limited.
Basic Serial Functional Specification for LV-5210/7215/7210 6.8 Computer 1 COMMAND COMMAND “C05” [CR] Detail Select Computer 1 input. When optional accessory, MCI BOX is installed, select the function (Memory Card / Wireless / Wired). Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.9 Computer 2 COMMAND COMMAND “C06” [CR] Detail Select Computer 2 input. When Computer 2 terminal is set to Monitor Out, the command will not be executed (the response is “Acceptable” through.
Basic Serial Functional Specification for LV-5210/7215/7210 6.13 AUDIO MUTE ON COMMAND COMMAND “C0B” [CR] Detail Sound Mute ON This command works same as “MUTE” of the projector and the remote control, but this command does not work for MUTE OFF. Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.
Basic Serial Functional Specification for LV-5210/7215/7210 6.19 Image Standard COMMAND COMMAND “C11” [CR] Detail Set Image to Standard Mode. Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.20 Image High Contrast COMMAND COMMAND “C12” [CR] Detail Set Image to High contrast Mode. Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.21 Image Cinema COMMAND COMMAND “C13” [CR] Detail Set Image to Cinema Mode. Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.
Basic Serial Functional Specification for LV-5210/7215/7210 6.25 DISPLAY CLEAR COMMAND COMMAND “C1E” [CR] Detail Clear the On Screen Display Clear the On screen Display unconditionally Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.26 BRIGHTNESS + COMMAND COMMAND “C20” [CR] Detail Brightness of user control +1 Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.
Basic Serial Functional Specification for LV-5210/7215/7210 6.31 IMAGE (Toggle) COMMAND COMMAND “C27” [CR] Detail Switch Image setting status. This command works the same as the remote control’s “Image” button or the key on the projector body. Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.32 ON START SETTING COMMAND COMMAND “C28” [CR] Detail Set to Power ON setting status This setting status is stored in EEPROM, even if the power is ON/OFF.
Basic Serial Functional Specification for LV-5210/7215/7210 6.37 D.ZOOM + COMMAND COMMAND “C30” [CR] Detail Moving on to Digital Zoom Mode and make the screen image bigger. This command works the same as the remote control’s “D.ZOOM UP” Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.38 D.ZOOM – COMMAND COMMAND “C31” [CR] Detail Moving on to Digital Zoom Mode and make the screen image smaller. This command works the same as the remote control’s “ZOOM DOWN” button.
Basic Serial Functional Specification for LV-5210/7215/7210 6.43 POINTER LEFT Command COMMAND “C3B” [CR] Detail Move Pointer to left On Screen Display Menu. This command works the same as the remote control’s “<” Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.44 POINTER UP Command COMMAND “C3C” [CR] Detail Move Pointer to UP On Screen Display This command works the same as the remote control’s “UP” button. Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.
Basic Serial Functional Specification for LV-5210/7215/7210 6.49 FREEZE OFF COMMAND COMMAND “C44” [CR] Detail Return to Freeze OFF screen. This command works the same as the remote control’s “FREEZE” button for Freeze off. Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.50 INPUT 1 Analog RGB COMMAND COMMAND “C50” [CR] Detail Select Analog RGB input for Input 1. Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.
Basic Serial Functional Specification for LV-5210/7215/7210 6.55 AUTO PC ADJ. COMMAND COMMAND “C89” [CR] Detail Execute Auto PC Adj. command This command works the same as a remote control’s “AUTO PC ADJ.” button. While Auto PC Adj is working and a computer issues another command, Auto PC Adj. Stops. Response Acceptable [ACK] [CR] Unacceptable “?” [CR] 6.56 PRESENTATION TIMER COMMAND COMMAND “C8A” [CR] Detail Set a presentation timer to active.
Basic Serial Functional Specification for LV-5210/7215/7210 7 State Read Command 7.1 Format 7.1.1 A PC issues commands fin format as below. “CＲ” COMMAND [CR] Command: 1 character (See Status Read Command Table) 7.1.2 When a projector receives the appropriate command, it returns a character line as the required data. Required Data [CR] Required Data: A character line (See Basic Status Read Command Table) When receiving data cannot be decode, the projector returns, ““?” [CR]. 7.
Basic Serial Functional Specification for LV-5210/7215/7210 7.3.2 “80” [CR] Status: STAND BY When the status is STAND BY, Status Read Commands are always acceptable, but Functional Execution Commands are not acceptable except Power ON Command. 7.3.3 “40” [CR] Status: Processing Count Down When “Display” in Setting Menu is ON and Power ON is executed, it starts processing Count Down.
Basic Serial Functional Specification for LV-5210/7215/7210 7.3.9 “24” [CR] Status: Processing Power Save・Cooling Down Cooling down by the power management function in the e setting menu. The control command is invalid. This Power Save・Cooling Down moves to Power Save after the cooling down time. Status: No signal POWER SAVE ・ COOLING DOWN POWER SAVE Response: ”00” “24” After 5 minutes with no signal “04” after about 90 seconds 7.3.
Basic Serial Functional Specification for LV-5210/7215/7210 7.6 Setting Read COMMAND COMMAND “CR4” [CR] Detail Get setting status for screen such as Ceiling/Rear. Acceptable Response ％1 Unacceptable “％1” [CR] “11” [CR] = Normal Screen Setting “10” [CR] = Rotation around the horizontal setting (Rear＆ Ceiling ON) “01” [CR] = Rotation around the horizontal setting Rear ON) “00” [CR] = Vertical and right-and left (four directions) reversal setting (status: Ceiling ON) “?” [CR] 7.
