lv5210_series_exp_cmd

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8 Functional Execution Command
8.1 Format
１. The following format’s commands issued form a PC
Pattern1:”CF_COMMAND” [CR]
Pattern2:”CF_COMMAND_%1” [CR]
CF_:Header
COMMAND:Letters
%1:Parameter(Letters)
_:Space（To separate COMMAND and parameter）
２. When a projector decoded a received data and ready to receive the next Command, it
will return acknowledgment.
“000” [CR]:（0x06,0x0D）When received Function Execute Command
“nnn” [CR]:Unable to execute any value except “000” value for any specific reason.
See the Ode/ode for its contents
３. When received an undecodable data
Returns”?” [CR]
8.2 Transfer Example
When setting projector total command to 1344 by expand command
PC PJ :”CF_TDOTS_1344” [CR]
PC PJ :”000” [CR] ---------------- Reception OK
8.3 Operation Requirements
When the functional execution command is limited, the projector sends an error command
as shown in the table below.
Projector Status Available Function Execution Command
STANDBYMODE C00:POWER ON
Processing Count Down
C00:POWER ON
(Terminate Count Down)
Processing Cooling Down N/A
Cooling Down due to abnormal
temperature
N/A
Abnormal Temperature N/A
Abnormal Power
(60sECOnds after Power has turned to
abnormal)
N/A
Processing Power Save Cooling Down N/A
Processing Power Save
C00:POWER ON
C01:POWER OFF
Note): When the projector receives other commands in the above status, they return error
code to show the status.
Page 14