Canon MP280 series On-screen Manual Lehekülg 1 / 707 Käesoleva juhendi kasutamine Käesoleva juhendi printimine MC-4714-V1.00 Põhijuhend Põhjalik juhend Tootekirjelduse kokkuvõte. Toote funktsioonide detailne kirjeldus.
MP280 series Põhijuhend Lehekülg 2 / 707 Käesoleva juhendi kasutamine Käesoleva juhendi printimine MP-4514-V1.
Seadme ülevaade Lehekülg 3 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Seadme ülevaade Seadme ülevaade See lõik näitab seadme osade nimetusi ja kirjeldab põhitoiminguid, mida peaksite enne selle kasutamist teadma.
Põhikomponendid Lehekülg 4 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Seadme ülevaade > Põhikomponendid C001 Põhikomponendid Eestvaade Tagantvaade Sisemine vaade Juhtpaneel Eestvaade (1) Dokumendikaas Avage originaali asetamiseks kopeerimisalusele. (2) Paberitugi Paberi asetamiseks tagumisele paberialusele tõstke see üles ja kallutage tagasi. (3) Tagumine paberialus Pange seadmesse erineva suurusega ja erinevat tüüpi paberit, mida on masinas lubatud kasutada.
Põhikomponendid (7) Kopeerimisalus Asetage kopeeritav või skannitav originaal seadmesse. (8) Juhtpaneel Kasutage seadme sätete muutmiseks või sellega töötamiseks. Vt jaotist Juhtpaneel. Märkus Juhtpaneeli LED-näidik ning märgutuled, välja arvatud Toite (POWER) märgutuli, kustuvad, kui seadet ei kasutata umbes 5 minutit. Nende taastamiseks vajutage mis tahes nuppu, välja arvatud nuppu Sisse (ON) , või alustage printimist. Tagantvaade (9) USB-port Ühendage sellega seadet arvutiga ühendav USB-kaabel.
Põhikomponendid Lehekülg 6 / 707 (11) Tindikasseti lukustuskaaned Lukustavad FINE-kasseti oma kohale. (12) FINE-kasseti hoidik FINE-kassettide paigaldamiseks. Värviline FINE-kassett tuleks paigaldada vasakpoolsesse pessa ( pessa ( ) ja must FINE-kassett parempoolsesse ). (13) FINE-kassetid (tindikassetid) Asendatav kassett, mis koosneb sisseehitatud prindipeast ja tindimahutist. Märkus Üksikasjalikku teavet FINE-kasseti paigaldamise kohta lugege trükitud kasutusjuhendist: Alustamise juhend .
Põhikomponendid (1) Nupp Sisse (ON) / märgutuli Toide (POWER) Lülitab seadme toite sisse või välja. Enne seadme sisselülitamist veenduge, et dokumendikaas on suletud. Tähtis! Toitepistiku väljatõmbamine Kui tõmbate toitepistiku pärast toite väljalülitamist seinakontaktist välja, siis veenduge, et märgutuli POWER ei põle. Kui tõmbate toitepistiku seinakontaktist välja ajal, mil märgutuli POWER ikka veel põleb või vilgub, ei pruugi seade korralikult printida, kuna prindipea ei ole kaitstud.
Põhikomponendid Lehekülg 8 / 707 Käivitab värvilise kopeerimise. Võite seda nuppu vajutada ka sätteparameetri kinnitamiseks. (9) Nupp Must režiim (Black) * Käivitab mustvalge kopeerimise. Võite seda nuppu vajutada ka sätteparameetri kinnitamiseks. (10) Nupp Sobita lehele (Fit to Page) / märgutuli Sobita lehele (Fit to Page) Võimaldab lehele sobitamisega kopeerimise funktsiooni.
LED-ekraan ja põhitoimingud Lehekülg 9 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Seadme ülevaade > LED-ekraan ja põhitoimingud C002 LED-ekraan ja põhitoimingud Saate seadet kasutada koopiate tegemiseks või hooldustoimingute läbiviimiseks ilma arvutita. Selles jaotises kirjeldatakse juhtpaneeli LED-ekraani ja põhitoiminguid juhtpaneelil. Tavaliselt ilmub toite sisselülitamisel LED-näidikul number 1. LED-ekraanile kuvatakse seadme olek järgmiselt.
LED-ekraan ja põhitoimingud Toiming Hoolduskood Lehekülg 10 / 707 Vaadake jaotist Prinditakse pihustite kontrollmuster. Pihustite kontrollmustri printimine Puhastatakse prindipea. Prindipea puhastamine Sooritatakse prindipea sügavpuhastus. Prindipea sügavpuhastus Prinditakse prindipea joondusleht. Prindipea joondamine Skannitakse automaatselt prindipea joonduslehte, et prindipead joondada. Prindipea joondamine Prinditakse prindipea asendi praegused kohandusväärtused.
Kopeerimine Lehekülg 11 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Kopeerimine Kopeerimine Saate vastavalt lehe suurusele teha suurendatud või vähendatud koopiaid ning lisaks tavapärastele koopiatele ka ääristeta koopiaid prinditud fotodest.
Dokumentide kopeerimine Lehekülg 12 / 707 Põhjalik juhend Sisukord > Kopeerimine > Dokumentide kopeerimine C021 Dokumentide kopeerimine Selles jaotises kirjeldatakse A4- või Letter-vormingus dokumentide tavapaberile kopeerimise toiminguid. Selle toimingu tegemiseks vt teabelehel kirjeldatud märkusi ja tööprotseduuri. Teil läheb vaja järgmist: Kopeeritavaid originaale. Vt jaotist Lisatavad originaalid . Paberit printimiseks. Vt jaotist Kasutatavad prindikandjad . 1. Valmistuge kopeerimiseks.
Dokumentide kopeerimine (4) Asetage originaal kopeerimisalusele. Vt jaotist Originaalide lisamine . Asetage seadmesse nii, et originaal ON KOPEERITAVA POOLEGA ALLAPOOLE ning joondage see joondusmärgiga , nagu allpool näidatud. Seejärel sulgege ettevaatlikult dokumendikaas. Märkus Üksikasju originaali, mida saab kopeerida, tüüpide ja tingimuste kohta ning kuidas originaali asetada vt jaotisest Originaalide lisamine .
Dokumentide kopeerimine Lehekülg 14 / 707 määratud koopiate arv on „20“. Vajutage uuesti nuppu [ +], et määrata uuesti arv „1“. 10 kuni 19 koopia tegemine (1) Kuvage LED-näidikul täht F. (2) Asetage seadmesse ainult nii palju lehti, kui soovite kopeerida. (2) Vajutage korduvalt nuppu Paber (Paper) , et valida lehe vorming ja prindikandja tüüp. Märgutuli Paber (Paper) näitab valitud paberi vormingut ja prindikandja tüüpi. Valige tavapaber vormingus A4 või 8,5 x 11 tolli.
Dokumentide kopeerimine Lehekülg 15 / 707 Kopeerimise katkestamiseks vajutage nuppu Stopp/tühistus (Stop/Reset) . Lehe vormingu vahetamine A4 ja 8,5 x 11 tolli (Letter) vahel Saate vahetada tagasalve lisatud paberi vormingut A4 või 8,5 x 11 tolli (Letter) vahel. Antud säte on kasulik siis, kui lisate tagasalve tavaliselt Letter-vormingus paberit, hoolimata juhtpaneelil näidatud paberivormingust „A4“ või vastupidi. 1. Vajutage korduvalt nuppu 2.
Fotode kopeerimine Lehekülg 16 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Kopeerimine > Fotode kopeerimine C023 Fotode kopeerimine Selles jaotises kirjeldatakse prinditud foto 10 x 15 cm / 4 x 6 tolli suurusele fotopaberile kopeerimise toiminguid. Teil läheb vaja järgmist: Prinditud fotod. Fotopaber printimiseks. Vt jaotist Kasutatavad prindikandjad . 1. Valmistuge foto kopeerimiseks. (1) Lülitage toide sisse. Vt jaotist Juhtpaneel. (2) Lisage paberit.
Fotode kopeerimine Lehekülg 17 / 707 hoolimata juhtpaneelil näidatud vormingust. Vt jaotist Lehe vormingu vahetamine A4 ja 8,5 x 11 tolli (Letter) vahel . Kui lehele sobitamisega kopeerimise funktsioon on aktiveeritud, saate kopeerida originaali nii, et selle suurust suurendatakse või vähendatakse valitud lehevorminguga sobitamiseks automaatselt. Sel juhul kopeeritakse originaal tavapaberile ääristega ja fotopaberile ääristeta.
Kopeerimine vastavalt lehe vormingule Lehekülg 18 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Kopeerimine > Kopeerimine vastavalt lehe vormingule C024 Kopeerimine vastavalt lehe vormingule Lehele sobitamisega kopeerimise funktsioon võimaldab originaali kopeerida nii, et seda suurendatakse või vähendatakse vastavalt valitud lehe vormingule automaatselt. 1. Valmistuge kopeerimiseks. Vt jaotise Dokumentide kopeerimine punkti 1. 2. Vajutage koopiate arvu määramiseks korduvalt nuppu [ +].
Kopeerimine vastavalt lehe vormingule Lehekülg 19 / 707 Lehekülje algusesse
Skannimine Lehekülg 20 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Skannimine Skannimine Võite salvestada skannitud andmed oma arvutisse ning neid kaasasoleva tarkvararakenduse abil redigeerida või töödelda.
Skannitud andmete salvestamine arvutisse Lehekülg 21 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Skannimine > Skannitud andmete salvestamine arvutisse C041 Skannitud andmete salvestamine arvutisse See jaotis kirjeldab, kuidas vastavalt MP Navigator EX-iga määratud sätetele seadme juhtpaneeli kasutades originaale skannida ning arvutisse salvestada. Juhiseid originaalide skannimiseks arvutist vt elektroonilisest juhendist Põhjalik juhend .
Skannitud andmete salvestamine arvutisse Lehekülg 22 / 707 Sel juhul vaadake elektroonilist juhendit Põhjalik juhend , et muuta MP Navigator EX-i jaotiste Document Type ja Document Size sätteid nii, et need sobiksid originaaliga, ning skannige originaali uuesti. Programmivaliku ekraani ilmumine. Programmivaliku kuva võib ilmuda pärast sammu 2 teostamist. Programmivaliku kuva ilmumisel valige MP Navigator EX Ver4.0 ja klõpsake OK.
Arvutist printimine Lehekülg 23 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Arvutist printimine Arvutist printimine Selles jaotises kirjeldatakse, kuidas printida arvutist dokumente või fotosid. Seadmega kaasneva rakenduse Easy PhotoPrint EX abil saate hõlpsasti printida digifotoaparaadiga tehtud fotosid.
Fotode printimine (Easy-PhotoPrint EX-i abil) Lehekülg 24 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Arvutist printimine > Fotode printimine (Easy-PhotoPrint EX-i abil) C051 Fotode printimine (Easy-PhotoPrint EX-i abil) Printige arvutisse salvestatud pildiandmeid teie seadmega kaasneva Easy-PhotoPrint EX-i abil. Selles jaotises kirjeldatakse ääristeta fotode 10 x 15 cm / 4 x 6 tolli suurusele fotopaberile printimise toiminguid.
Fotode printimine (Easy-PhotoPrint EX-i abil) 3. Valige foto, mida soovite printida. (1) Valige kaust, kuhu kujutised on salvestatud. (2) Printimiseks klõpsake kujutisel. Koopiate arvuks kuvatakse „1” ja teie valitud kujutis ilmub valitud kujutise alasse (A). Võite valida korraga kaks või enam kujutist. Märkus Et printida korraga kaht või enamat pilti, klõpsake koopiate arvu muutmiseks ikoonil (üles suunatud nool).
Fotode printimine (Easy-PhotoPrint EX-i abil) 5. Lehekülg 26 / 707 Valige vorming ja alustage printimist. (1) Valige foto küljendus. Siin valime Borderless (full). Eelvaade kuvatakse valitud vormingus, et soovitud printimistulemust kinnitada. Märkus Saate muuta foto suunda või sellest printimiseks osa välja lõigata. Toimingu üksikasju vaadake elektroonilisest juhendist Põhjalik juhend . (2) Klõpsake valikut Print.
Rakenduse Easy-PhotoPrint EX erinevate funktsioonide kasutamine Lehekülg 27 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Arvutist printimine > Fotode printimine (Easy-PhotoPrint EX-i abil) > Rakenduse Easy-PhotoPrint EX erinevate funktsioonide kasutamine C052 Rakenduse Easy-PhotoPrint EX erinevate funktsioonide kasutamine See jaotis tutvustab mõningaid Easy-PhotoPrint EX-i kasulikke funktsioone. Täpsema teabe saamiseks vaadake elektroonilist juhendit Põhjalik juhend .
Dokumentide printimine Lehekülg 28 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Arvutist printimine > Dokumentide printimine C053 Dokumentide printimine Selles jaotises kirjeldatakse A4-vormingus dokumentide tavapaberile printimise toiminguid. Täpsema teabe saamiseks vaadake elektroonilist juhendit Põhjalik juhend . Märkus Sõltuvalt teie tarkvararakendusest võivad toimingud erineda. Lisateavet leiate oma rakenduste kasutusjuhendist.
Dokumentide printimine Used Settings, siis valitakse automaatselt valiku Additional Features alt vastavad objektid. Kuvatakse prinditavale objektile sobivad seadistused, nt prindikandja või printimiskvaliteet. (2) Kontrollige kuvatud määrangut. Siinkohal veendume, et sättes Media Type oleks valitud Plain Paper, sättes Print Quality suvand Standard ning sättes Printer Paper Size valik A4. Märkus Kui valite sätte Copies alt enam kui kaks koopiat, siis järjestatakse prinditud leheküljed eksemplarhaaval.
Dokumentide printimine Lehekülg 30 / 707 Märkus Ümbrikele printides kuvatakse teade selle kohta, kuidas ümbrikke asetada. Seda teadet ei kuvata järgmisel korral, kui märgistate märkeruudu Do not show this message again. Täpsemat teavet ümbrike printimise sätete kohta vaadake jaotisest Ümbrike lisamine . Käimasoleva printimistöö katkestamiseks vajutage seadmel nuppu Stopp/Tühistus (Stop/ Reset) või klõpsake printeri oleku monitoril valikul Cancel Printing.
Veebilehtede printimine (Easy-WebPrint EX-i abil) Lehekülg 31 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Arvutist printimine > Veebilehtede printimine (Easy-WebPrint EX-i abil) C054 Veebilehtede printimine (Easy-WebPrint EX-i abil) Easy-WebPrint EX võimaldab kiiret ja hõlpsat Internet Exploreri veebilehtede printimist. Saate printida veebilehti nii, et nende suurus muudetakse paberi ääreaala vähendamata automaatselt paberile sobivaks, või kuvada eelvaate ning valida printimiseks soovitud veebilehed.
Veebilehtede printimine (Easy-WebPrint EX-i abil) Lehekülg 32 / 707 Lehekülje algusesse
Erinevate tarkvararakenduste käivitamine Lehekülg 33 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Arvutist printimine > Erinevate tarkvararakenduste käivitamine C055 Erinevate tarkvararakenduste käivitamine Selles jaotises kirjeldatakse rakendust Solution Menu EX, mille abil saate käivitada seadmega kaasas olevaid tarkvararakendusi. Kaasas on samuti teave Easy-WebPrint EX-i kohta, mis on veebilehtede printimise tarkvararakendus.
Erinevate tarkvararakenduste käivitamine Start Application Kaasas olevate tarkvararakenduste, näiteks Easy-PhotoPrint EX-i ja My Printeri käivitamine. Rakenduse My Printer abil saate kuvada printeridraiveri seadistusakna ja saada teavet tegevuste kohta, mis on seadme kasutamisel tekkivate häirete korral vajalikud. Online Shopping Veebilehelt tarvikute, näiteks tindi ostmine. Information Seadme kohta kasuliku teabe otsimine.
Erinevate tarkvararakenduste käivitamine Lehekülg 35 / 707 Easy-WebPrint EX Easy-WebPrint EX-i installimisel lisatakse teie Internet Exploreri kuvale tööriistariba. Tööriistariba on saadaval alati, kui Internet Explorer töötab. Märkus Easy-WebPrint EX-i installimine Kui Easy-WebPrint EX ei ole installitud, siis võib Easy-WebPrint EX-i installimisjuhend avaneda tegumiriba teavitusalal. Klõpsake Easy-WebPrint EX-i installimiseks kuvatud juhendil ning jälgige ekraanil olevaid juhiseid.
Paberi/originaalide lisamine Lehekülg 36 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Paberi/originaalide lisamine Paberi/originaalide lisamine Antud jaotises kirjeldatakse paberite või originaalide tüüpe, mida saate seadmesse lisada, kuidas printimiseks paberit tagasalve lisada ja kuidas originaale kopeerimiseks või skannimiseks seadmesse asetada.
Paberi lisamine Lehekülg 37 / 707 Põhjalik juhend Sisukord > Paberi/originaalide lisamine > Paberi lisamine C073 Paberi lisamine Tavalise paberi / fotopaberi lisamine Ümbrike lisamine Kasutatavad prindikandjad Prindikandjad, mida ei saa kasutada Tavalise paberi / fotopaberi lisamine Tähtis! Kui lõigata tavaline paber prooviprindi jaoks 10 x 15 cm / 4 x 6 tolli, 101,6 x 203,2 mm / 4 x 8 tolli, 13 x 18 cm / 5 x 7 tolli või 55,0 x 91,0 mm / 2,16 x 3,58 tolli (krediitkaardi) suuruseks, võib see põhjustada
Paberi lisamine (3) Paberijuhikute avamiseks (A) libistage neid ja asetage paber paberialuse keskele PRINDITAVA POOLEGA ÜLESPOOLE. (4) Libistage paberijuhikud (A) mõlemale poole paberipaki külgi. Ärge libistage paberijuhikuid liiga tugevalt. Paber ei pruugi õigesti seadmesse asetuda. Tähtis! Asetage paber seadmesse alati vertikaalsuunas (B). Paberi asetamine seadmesse horisontaalsuunas (C) võib põhjustada paberiummistuse.
Paberi lisamine Lehekülg 39 / 707 Märkus Ärge asetage seadmesse rohkem paberit kui laadimispiiriga (D) lubatud. Märkus Paberi söötmisel võib seade teha töömüra. Pärast paberi lisamist Kopeerimisel valige seadme juhtpaneeli abil seadmesse asetatud paberi vorming ja tüüp. Vt jaotist Kopeerimine . Kui prindite arvutiga, valige seadmesse asetatud paberi suurus ja tüüp printeridraiveri seadetest Printer Paper Size ja Media Type. Vt jaotist Dokumentide printimine.
Ümbrike lisamine Lehekülg 40 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Paberi/originaalide lisamine > Paberi lisamine > Ümbrike lisamine C074 Ümbrike lisamine Saate printida ümbrike nii suurusega European DL kui ka US #10. Õigete printeridraiveri sätete puhul pööratakse aadressi automaatselt ning prinditakse vastavalt ümbriku söödusuunale. Tähtis! Ümbrikele saab printida vaid arvutist. Ärge kasutage järgmisi ümbrikke. Need võivad seadme ummistada või seade võib tõrkuma hakata.
Ümbrike lisamine (2) Avage ettevaatlikult paberi väljastusalus ja seejärel selle pikendus. (3) Paberijuhikute avamiseks (A) libistage neid ja asetage ümbrikud paberialuse keskele, AADRESSIKÜLJEGA ÜLESPOOLE. Ümbriku allavolditud klapp jääb allapoole vasakule küljele. Korraga võib seadmesse lisada kuni 10 ümbrikku. (4) Libistage paberijuhikud (A) mõlemale poole ümbriku külgi. Ärge libistage paberijuhikuid liiga tugevalt. Ümbrikud ei pruugi olla õigesti söödetud.
Ümbrike lisamine Lehekülg 42 / 707 (2) Valige DL Env. või Comm. Env. #10 aknas Envelope Size Setting. (3) Valige suvandis Orientation väärtus Landscape. Tähtis! Kui te ei määra ümbriku suurust või asendit õigesti, siis prinditakse aadress tagurpidi või 90kraadise nurga all. Märkus Ümbrike söötmisel võib seade teha töömüra.
Kasutatavad prindikandjad Lehekülg 43 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Paberi/originaalide lisamine > Paberi lisamine > Kasutatavad prindikandjad C075 Kasutatavad prindikandjad Parimate prinditulemuste saavutamiseks valige printimiseks sobiv paber. Canon pakub printimisrõõmu kindlustamiseks erinevaid paberitüüpe, nagu kleebispaberid, aga ka foto- või dokumendipaberid. Soovitame oluliste fotode printimiseks kasutada Canoni originaalpaberit.
Kasutatavad prindikandjad - Prindikandja seaded Prindidraiver: Glossy Photo Paper Photo Paper Glossy *1 - Prindikandja seaded Prindidraiver: Glossy Photo Paper Photo Paper Plus Glossy II *1 - Prindikandja seaded Prindidraiver: Photo Paper Plus Glossy II Photo Paper Plus Semi-gloss *1 - Prindikandja seaded Prindidraiver: Photo Paper Plus Semi-gloss Matte Photo Paper - Prindikandja seaded Prindidraiver: Matte Photo Paper - Paberi täitepiir Tagasalv: 10 lehte formaadis A
Kasutatavad prindikandjad - Paberi täitepiir Tagumine alus: 1 leht - Paberi väljastusaluse täitepiir Hägustumise ja luitumise ärahoidmiseks soovitame enne pidevat printimist eelnevalt prinditud leht paberi väljastusaluselt eemaldada. Märkus Saate prindisätteid seadistamise CD-ROM-il (Setup CD-ROM) oleva rakenduse EasyPhotoPrint EX abil hõlpsasti määrata. Installige see oma arvutile. Lehekülje suurused Saate kasutada järgmisi lehekülje suurusi.
Kasutatavad prindikandjad Lehekülg 46 / 707 prooviprintimiseks.
Prindikandjad, mida ei saa kasutada Lehekülg 47 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Paberi/originaalide lisamine > Paberi lisamine > Prindikandjad, mida ei saa kasutada C076 Prindikandjad, mida ei saa kasutada Ärge kasutage järgmist tüüpi paberit. Sellise paberi kasutamisel ei jää tulemus rahuldav ning lisaks võib selle tagajärjel masin ummistuda või rikki minna.
Originaalide lisamine Lehekülg 48 / 707 Põhjalik juhend Sisukord > Paberi/originaalide lisamine > Originaalide lisamine C077 Originaalide lisamine Originaalide lisamine Lisatavad originaalid Originaalide lisamine Asetage originaalid, mida soovite kopeerida või skannida, klaasplaadile. Tähtis! Originaali seadmesse asetamise järel sulgege kindlasti dokumendikaas, enne kui alustate kopeerimist või skannimist. Kui skannite arvutist tarkvararakenduse abil, peate originaali seadmesse asetama teisiti.
Originaalide lisamine Lehekülg 49 / 707 Parima prindikvaliteedi saamiseks võimaldab seade prindikandja serva veerist muuta. Tegelik prindiala on ala, mis jääb veeriste vahele. (B) 3,0 mm / 0,12 tolli (C) 5,0 mm / 0,20 tolli (D) 3,4 mm / 0,13 tolli (6,4 mm / 0,25 tolli paberiformaadile Letter ja Legal) (E) 3,4 mm / 0,13 tolli (6,3 mm / 0,25 tolli paberiformaadile Letter ja Legal) 2. Sulgege ettevaatlikult dokumendikaas.
Lisatavad originaalid Lehekülg 50 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Paberi/originaalide lisamine > Originaalide lisamine > Lisatavad originaalid C079 Lisatavad originaalid Saate kopeerida või skannida järgmisi originaale.
Regulaarne hooldus Lehekülg 51 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Regulaarne hooldus Regulaarne hooldus See jaotis kirjeldab, kuidas puhastada seadet tuhmide prinditulemuste puhul, kuidas vahetada välja tühjaks saanud FINE-kassette või kuidas käituda paberi söötmisel tekkivate probleemide puhul.
Print on hele või värvitoonid valed Lehekülg 52 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Regulaarne hooldus > Print on hele või värvitoonid valed C093 Print on hele või värvitoonid valed Kui prinditulemus muutub hägusaks või värve ei prindita õigesti, siis on prindipea pihustid (FINEkassettid) arvatavasti ummistunud. Pihustite seisundi kontrollimiseks printige allkirjeldatud viisil pihusti kontrollmuster ja seejärel puhastage prindipead.
Print on hele või värvitoonid valed Lehekülg 53 / 707 Märkus Kui probleem ei ole pärast FINE-kasseti asendamist ikka veel lahenenud, siis pöörduge teeninduskeskusse. Kui prinditulemused on ebaühtlased, näiteks sirgjooned on valesti joondatud: Vt jaotist Prindipea joondamine . Märkus Hooldustöid saate teha ka oma arvutist. Täpsema teabe saamiseks vaadake elektroonilist juhendit Põhjalik juhend .
Pihustite kontrollmustri printimine Lehekülg 54 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Regulaarne hooldus > Print on hele või värvitoonid valed > Pihustite kontrollmustri printimine C094 Pihustite kontrollmustri printimine Et kontrollida tindi väljutamist prindipeast, printige pihustite kontrollmuster. Märkus Kui järelejäänud tinditase on madal, ei prindita pihustite kontrollmustrit õigesti. Vahetage vähese tindiga FINE-kassett välja. Vt jaotist FINE-kasseti vahetamine .
Pihustite kontrollmustri uurimine Lehekülg 55 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Regulaarne hooldus > Print on hele või värvitoonid valed > Pihustite kontrollmustri uurimine C095 Pihustite kontrollmustri uurimine Uurige pihustite kontrollmustrit ja puhastage vajadusel prindipead. 1. Kontrollige, ega mustris (1) ei ole puuduvaid jooni ning ega mustris (2) ei ole horisontaalseid valgeid triipe. (1) Kontrollige, kas mustris puuduvad read. Kui jah, siis on puhastamine vajalik.
Prindipea puhastamine Lehekülg 56 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Regulaarne hooldus > Print on hele või värvitoonid valed > Prindipea puhastamine C096 Prindipea puhastamine Puhastage prindipead, kui pihustite kontrollmustril on osa jooni puudu või paberil on horisontaalsed valged triibud. Taoline puhastamine eemaldab pihustite ummistused ning taastab prindipea töökindluse. Prindipea puhastamine kulutab tinti, seetõttu puhastage prindipead ainult vajadusel. 1.
Prindipea sügavpuhastus Lehekülg 57 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Regulaarne hooldus > Print on hele või värvitoonid valed > Prindipea sügavpuhastus C097 Prindipea sügavpuhastus Kui tavaline prindipea puhastamine prindikvaliteeti ei paranda, proovige prindipea sügavpuhastust. Prindipea sügavpuhastus kulutab standardsest prindipea puhastamisest enam tinti, seetõttu tehke seda ainult vajadusel. 1. Veenduge, et seade on sisse lülitatud. 2. Viige läbi prindipea sügavpuhastus.
Prindipea joondamine Lehekülg 58 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Regulaarne hooldus > Print on hele või värvitoonid valed > Prindipea joondamine C098 Prindipea joondamine Kui prinditud sirgjooned on valesti joondatud või printimistulemus teid mingil muul põhjusel ei rahulda, muutke prindipea asendit. Märkus Kui alles on jäänud liiga vähe tinti, ei prindita prindipea joondusmustrit õigesti. Vahetage vähese tindiga FINE-kassett välja. Vt jaotist FINE-kasseti vahetamine .
Prindipea joondamine Lehekülg 59 / 707 Tähtis! Ärge puutuge prindipea joondusmustri lehele prinditud osa. Vaadake hoolikalt, et prindipea joondusleht ei määrduks. Lehe määrdumisel või kortsumisel ei pruugita seda õigesti skannida. 5. Skannige prindipea asendi kohandamiseks prindipea joonduslehte. (1) Asetage prindipea joondusleht klaasplaadile. Asetage prindipea joondusleht nii, et PRINDITUD KÜLG JÄÄB ALLAPOOLE, ning joondage lehe ülemises vasakus nurgas asuv märge joondustähisega .
Prindipea joondamine Lehekülg 60 / 707 Seade hakkab prindipea joonduslehte skannima ning prindipea asendit kohandatakse automaatselt. Kui prindipea asendi korrigeerimine on lõpetatud, siis naaseb LED kopeerimise ooterežiimile. Eemaldage prindipea joondusleht kopeerimisaluselt. Tähtis! Ärge avage dokumendikaant ega eemaldage prindipea joonduslehte enne, kui prindipea kohandamine on lõpetatud. Kui prindipea asendi kohandamine ei õnnestunud, siis ilmub LED-il veakood.
FINE-kasseti vahetamine Lehekülg 61 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Regulaarne hooldus > FINE-kasseti vahetamine C091 FINE-kasseti vahetamine Kui esineb alles jäänud tindi hoiatusi või tõrkeid, ilmub LED-näidikule tõrkekood, mis annab teile tõrke kohta teavet. Vt elektroonilise juhendi Põhjalik juhend peatüki „Tõrkeotsing“ jaotist „LED-näidikul kuvatakse tõrkekood “ ning käituge vastavalt olukorrale.
FINE-kasseti vahetamine 2. Tõstke skannimissõlme (kaant) ja hoidke seda seejärel skannimissõlme toega avatuna (C). FINE-kasseti hoidja liigub vahetamise asendisse. Ettevaatust Ärge hoidke FINE-kasseti hoidikust kinni, et seda jõuga peatada või liigutada. Ärge puudutage FINE-kasseti hoidikut, enne kui see on täielikult peatunud. Tähtis! Seadme sisemus võib olla tindist määrdunud. Olge ettevaatlik, et te FINE-kassetti vahetades oma käsi või riideid ei määriks.
FINE-kasseti vahetamine Tähtis! Ärge raputage FINE-kassette, kuna see võib põhjustada tindilekkeid ja määrida käed ning ümbruse. Käsitsege FINE-kassette ettevaatlikult. Olge ettevaatlik, et mitte määrida oma riideid ega käsi eemaldatud kaitselindi külge jäänud tindiga. Ärge pange kaitselinti pärast selle eemaldamist tagasi. Pidage selle käitlemisel kinni kohalikest kulutarvikute käitlemist käsitlevatest eeskirjadest ja nõuetest. Ärge puutuge FINE-kasseti elektriklemme või prindipea pihusteid.
FINE-kasseti vahetamine Lehekülg 64 / 707 (E) Korralikult suletud (F) Ei ole korralikult suletud (kaas on viltu) Tähtis! Seade ei saa printida, kui paigaldatud ei ole nii värviline kui ka must FINE-kassett. Paigaldage kindlasti mõlemad FINE-kassetid. 6. Skannimisseadme toe algsesse asendisse paigutamiseks tõstke skannimisseadet (kaant) kergelt ja sulgege see ettevaatlikult.
Lehekülg 65 / 707 Tindi oleku kontrollimine Põhjalik juhend Tõrkeotsing Sisukord > Regulaarne hooldus > FINE-kasseti vahetamine > Tindi oleku kontrollimine C092 Tindi oleku kontrollimine Tindi olekut saate kontrollida juhtpaneeli tinditulede abil või arvuti ekraani kaudu. Märkus Allesoleva tindi hulga määramiseks on seadmele lisatud tindi hulga tuvastaja. Seadme hinnangul on tinti täiel määral, kui seadmesse paigaldatakse uus FINE-kassett. Seejärel hakkab seade allesolevat tindihulka tuvastama.
Tindi oleku kontrollimine Lehekülg 66 / 707 Järgige kinnituskuva avamiseks allpool toodud juhiseid. 1. Avage printeridraiveri seadistusaken. Vaadake elektroonilist juhendit Põhjalik juhend . 2. Klõpsake View Printer Status lehel Maintenance. FINE-kasseti teabe kontrollimiseks klõpsake menüül Ink Details. Märkus Printimise ajal saate tegumiribal samuti kuvada printeri oleku monitori printeri ikooni klõpsamise teel.
Seadme puhastamine Lehekülg 67 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Regulaarne hooldus > Seadme puhastamine Seadme puhastamine Selles jaotises kirjeldatakse, kuidas seadme sisemust puhastada.
Paberisööterulliku puhastamine Lehekülg 68 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Regulaarne hooldus > Seadme puhastamine > Paberisööterulliku puhastamine C099 Paberisööterulliku puhastamine Kui paberisööterullik on määrdunud või paberitolm on selle külge kinni jäänud, siis ei pruugi paberi söötmine õnnestuda. Sellisel juhul puhastage paberisööterullikut. Paberisööterulliku puhastamine kulutab rullikut, seetõttu tehke seda ainult vajaduse korral.
Seadme sisemuse puhastamine (põhjaplaadi puhastamine) Lehekülg 69 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Regulaarne hooldus > Seadme puhastamine > Seadme sisemuse puhastamine (põhjaplaadi puhastamine) C101 Seadme sisemuse puhastamine (põhjaplaadi puhastamine) Eemaldage seadme sisemusest plekid. Kui seadme sisemus saab mustaks, võib ka prinditav paber mustaks saada. Seega soovitame seadet regulaarselt puhastada. Tähtis! Ärge sooritage põhjaplaadi puhastamise ajal seadmega muid toiminguid.
Seadme sisemuse puhastamine (põhjaplaadi puhastamine) Lehekülg 70 / 707 Kui probleem ei lahene ka pärast põhjaplaadi teistkordset puhastamist, võivad seadme sisemuses olevad eenduvad osad määrdunud olla. Vaadake nende puhastamise kohta jaotist Seadme sisemuses asuvate eenduvate osade puhastamine .
Seadme sisemuses asuvate eenduvate osade puhastamine Lehekülg 71 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Regulaarne hooldus > Seadme puhastamine > Seadme sisemuses asuvate eenduvate osade puhastamine C102 Seadme sisemuses asuvate eenduvate osade puhastamine Ettevaatust Enne seadme puhastamist lülitage toide kindlasti välja ning võtke toitejuhe vooluvõrgust välja.
Lisa Lehekülg 72 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Lisa Lisa Toote ja piltide kasutamisel kehtivad juriidilised piirangud Näpunäited, kuidas seadet kasutada Lehekülje algusesse
Toote ja piltide kasutamisel kehtivad juriidilised piirangud Lehekülg 73 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Lisa > Toote ja piltide kasutamisel kehtivad juriidilised piirangud Toote ja piltide kasutamisel kehtivad juriidilised piirangud Järgmiste dokumentide kopeerimine, skannimine, printimine või koopiate kasutamine võib olla ebaseaduslik. Siintoodud loetelu pole täielik. Kahtluse korral küsige nõu mõnelt kohalikult võimuesindajalt.
Näpunäited, kuidas seadet kasutada Lehekülg 74 / 707 Põhjalik juhend Tõrkeotsing Sisukord > Lisa > Näpunäited, kuidas seadet kasutada C112 Näpunäited, kuidas seadet kasutada Käesolev lõik annab näpunäiteid, kuidas seadet kasutada ja optimaalse kvaliteediga printida. Tinti kasutatakse erinevatel eesmärkidel. Kuidas kasutatakse tinti printimisest erinevatel eesmärkidel? Tinti võib kasutada millekski muuks kui printimiseks.
Näpunäited, kuidas seadet kasutada seaded! Pärast paberi asetamist seadmesse, valige kindlasti printeridraiveri jaotises Media Type või juhtpaneeli nupuga Paber (Paper) vastav paberi tüüp. Kui paberi tüüpi ei valita, ei pruugi printimistulemused rahuldavad olla. Vt jaotisi Kopeerimine , Arvutist printimine ja Kasutatavad prindikandjad . Saadaval on erinevat tüüpi pabereid: erilise pealispinnaga paber, mis on mõeldud optimaalse kvaliteediga fotode printimiseks, ja paber dokumentide jaoks.
Näpunäited, kuidas seadet kasutada Nõuanne: valige seadme asukoht hoolikalt! Paigutage seade vähemalt 15 cm / 5,91 tolli kaugusele teistest elektriseadmetest, näiteks luminofoorlampidest. Kui seade paikneb neile lähemal, siis võib luminofoormüra seadme korrektset tööd takistada. Kuidas tagada optimaalset printimiskvaliteeti? Optimaalse printimiskvaliteediga printimise võti on kanda hoolt, et prindipea ei kuivaks ega ummistuks. Optimaalse printimiskvaliteedi saavutamiseks järgige alati allolevaid samme.
Näpunäited, kuidas seadet kasutada Lehekülg 77 / 707 Sellisel juhul Printige pihustite kontrollmuster Kontrollige prinditud kontrollmustrit, et näha, kas pihustid on ummistunud. Vt jaotist Print on hele või värvitoonid valed .
MP280 series Põhjalik juhend Lehekülg 78 / 707 MC-4754-V1.
MP280 series Põhjalik juhend Lehekülg 79 / 707 Näo helendamise funktsiooni kasutamine Näo teravustamise funktsiooni kasutamine Digitaalse näo silumise funktsiooni kasutamine Iluvigade eemaldamise funktsiooni kasutamine Piltide kohandamine Piltide korrigeerimise/parandamise aken Videotest piltide loomine Videokaadri salvestamise / filmi printimise aken Piltide allalaadimine fotode jagamise saitidelt Fotode importimine fotode jagamise saitide aknast Küsimused ja vastused Kuidas salvestatud faili liigutada (v
MP280 series Põhjalik juhend Lehekülg 80 / 707 Klammerdamise piiri määramine Printige ääristeta Leheküljele sobitamisega printimine Muudetud suurusega printimine Lehe paigutuse printimine Reklaamplakati printimine Brošüüri printimine Kahepoolne printimine Templi/tausta printimine Templi kinnitamine Taustana kasutatavate pildiandmete kinnitamine Ümbrikule printimine Printimistulemuste kuvamine enne printimist Paberi mõõtmete määramine (kohandatud formaat) Prindikvaliteedi muutmine ja pildiandmete korrigee
MP280 series Põhjalik juhend Lehekülg 81 / 707 Dokumentide alusele asetamine Skannimine seadme juhtpaneeli kasutades Skannitud andmete edastamine arvutisse seadme juhtpaneeli kasutades Lisa: mitmesugused skannimissätted Juhtpaneelist käskudele vastuste valimine, kasutades MP Navigator EX-i Kaasasoleva rakendustarkvaraga skannimine Mis on MP Navigator EX (kaasasolev skanneritarkvara)? Proovige skannida MP Navigator EX-i käivitamine Lihtne skannimine automaatse skannimise abil Fotode ja dokumentide skann
MP280 series Põhjalik juhend Lehekülg 82 / 707 PDF-i sätete dialoogiaken Vaatamise ja kasutamise aken PDF-faili loomise/redigeerimise aken Dokumendi printimise dialoogiaken Foto printimise dialoogiaken E-postiga saatmise dialoogiaken Piltide korrigeerimise/parandamise aken Ühe klõpsu režiimi aken Automaatse skannimise dialoogiaken Salvestamise dialoogiaken (ühe klõpsu režiimi aken) Skannimise sätete dialoogiaken (ühe klõpsu režiimi aken) Salvestamise dialoogiaken Exif-sätete dialoogiaken PDF-i dialoogia
MP280 series Põhjalik juhend Lehekülg 83 / 707 Täiustatud režiimi vahekaart Sisendi sätted Väljundi sätted Pildi sätted Värvide reguleerimise nupud Automaatskannimise režiimi vahekaart Eelistuste dialoogiaken Skanneri vahekaart Eelvaate vahekaart Skannimise vahekaart Värvisätete vahekaart Lisa: skannimiseks kasulik teave Kärpimisraamide reguleerimine Resolutsioon Failiformaadid Värvide sobitamine Muud skannimismeetodid Skannimine WIA-draiveriga Skannimine juhtpaneeli kasutades (ainult Windows XP)
MP280 series Põhjalik juhend Lehekülg 84 / 707 Prinditulemus pole rahuldav Tööd ei saa lõpuni printida Prinditulemused puuduvad/väljaprint on hägune/värvid on valed/valged triibud Värvid on hägused Read on joondamata Prinditud leht kooldub või on tindiplekkidega Paber on määrdunud/prinditud pind on kriimustatud Paberi tagakülg on määrdunud Väljatrüki äärtel on püstjooned Värvid on ebaühtlased või triibulised Printimine ei alga Kopeerimine/printimine peatub enne töö lõpetamist Seade töötab, kuid tinti ei
MP280 series Põhjalik juhend Lehekülg 85 / 707 Ei saa korraga mitut dokumenti skannida Automaatskannimise režiimis ei ole võimalik korralikult skannida Aeglane skannimiskiirus Kuvatakse teade „There is not enough memory.” (Pole piisavalt mälumahtu.
Käesoleva juhendi kasutamine Lehekülg 86 / 707 Põhjalik juhend > Käesoleva juhendi kasutamine Käesoleva juhendi kasutamine Töötamine sisukorra paaniga Töötamine selgitava aknaga Käesoleva juhendi printimine Märksõnade kasutamine dokumendi leidmiseks Dokumentide kandmine Minu juhendisse Juhendis kasutatavad tingmärgid Kaubamärgid ja litsentsid Lehekülje algusesse
Töötamine sisukorra paaniga Lehekülg 87 / 707 Põhjalik juhend > Käesoleva juhendi kasutamine > Töötamine sisukorra paaniga Töötamine sisukorra paaniga Kui klõpsate mõnele elektroonilisest juhendist vasakul asuval sisukorra paanil kuvatud pealkirjale, näidatakse sellele pealkirjale vastavaid lehekülgi paremal asuvas selgitavas aknas. Kui klõpsate märgile , mis asub tähistusest dokumentide pealkirjad.
Töötamine selgitava aknaga Lehekülg 88 / 707 Põhjalik juhend > Käesoleva juhendi kasutamine > Töötamine selgitava aknaga Töötamine selgitava aknaga Selgitav aken (1) Vastavale dokumendile minekuks klõpsake rohelistele tähemärkidele. (2) Kursor liigub dokumendi algusesse. Toimingu selgitamiseks kasutatav aken See elektrooniline juhend kirjeldab toiminguid akna abil, mis kuvatakse operatsioonisüsteemi Windows 7 Home Premium (mida edaspidi nimetatakse Windows 7) kasutamisel.
Käesoleva juhendi printimine Põhjalik juhend > Käesoleva juhendi kasutamine > Käesoleva juhendi printimine Käesoleva juhendi printimine Klõpsake , et kuvada printimispaani elektroonilisest juhendist vasakul. Märkus Klõpsake printimispaani sulgemiseks või kuvamiseks. Kui klõpsate ja seejärel Lehe sätted (Page Setup), siis kuvatakse dialoogiaken Lehe sätted (Page Setup). Seejärel saate printimiseks kasutatavat paberit hõlpsasti seadistada.
Käesoleva juhendi printimine Prindi Minu juhend Prindi kõik dokumendid Märkus Valige printimistüüp ja siis saate hõlpsalt vahekaardil Prindisätted (Print Setup) prindisätteid täpsustada. Prindi avatud dokument Saate printida avatud dokumendi. 1. Valige Vali sihtmärk (Select Target), seejärel valige Avatud dokument (Current Document) Hetkel kuvatava dokumendi pealkiri on esitatud loetelus Prinditavad dokumendid (Documents to Be Printed).
Käesoleva juhendi printimine 3. Klõpsake Prindisätted (Print Setup) Vahekaardil Lehe sätted (Page Setup) valige kasutatav printer ja kui vaja, täpsustage tavalise printimise sätteid. 4. Klõpsake Alusta printimist (Start Printing) Kuvatakse teade, mis kinnitab printimisele minevate lehtede arvu. 5. Printige Kinnitage prinditavate lehekülgede arv ja klõpsake seejärel Yes. Kõik märkeruutudega valitud dokumendid prinditakse. Prindi Minu juhend Võite valida ja printida Minu juhendisse kantud dokumente.
Käesoleva juhendi printimine Lehekülg 92 / 707 (Clear All). Klõpsake Prindi eelvaade (Print Preview), et kontrollida, kuidas tulemus enne dokumendi tegelikku printimist välja näeb. 2. Klõpsake Prindisätted (Print Setup) Vahekaardil Lehe sätted (Page Setup) valige kasutatav printer ja kui vaja, täpsustage tavalise printimise sätteid. 3. Klõpsake Alusta printimist (Start Printing) Kuvatakse teade, mis kinnitab printimisele minevate lehtede arvu. 4.
Märksõnade kasutamine dokumendi leidmiseks Lehekülg 93 / 707 Põhjalik juhend > Käesoleva juhendi kasutamine > Märksõnade kasutamine dokumendi leidmiseks Märksõnade kasutamine dokumendi leidmiseks Otsitava dokumendi leidmiseks saate sisestada märksõna. Otsitakse kuvatava elektroonilise juhendi kõigi dokumentide hulgast. 1. Klõpsake Otsingupaan kuvatakse elektroonilisest juhendist vasakule. Märkus Otsingupaani sulgemiseks või kuvamiseks klõpsake . 2.
Märksõnade kasutamine dokumendi leidmiseks Lehekülg 94 / 707 loetelus. Kui teostate otsingut mitut märksõna kasutades, kuvatakse otsingu tulemused alljärgnevalt. [Täiusliku vastega dokumendid] ([Documents Containing Perfect Match]) Dokumendid, mis sisaldavad otsitavat sõnet (k.
Dokumentide kandmine Minu juhendisse Põhjalik juhend > Käesoleva juhendi kasutamine > Dokumentide kandmine Minu juhendisse Dokumentide kandmine Minu juhendisse Märkige sageli vaadatavad lehed Minu juhendi dokumentidena, et teil oleks nendele lehtedele igal ajal hõlbus juurdepääs. 1. Kuva dokument Kuva dokument, mida Minu juhendisse lisada. 2. Klõpsake Minu juhendi paan on elektroonilisest juhendist vasakul. Märkus Klõpsake Minu juhendi paani sulgemiseks või kuvamiseks. 3.
Dokumentide kandmine Minu juhendisse Lehekülg 96 / 707 4. Minu juhendi kuvamine Kui topeltklõpsate (või valite ja vajutate sisestusklahvile Enter) dokumendi pealkirjal, mida kuvatakse aknas Minu juhise loend (List of My Manual), siis kuvatakse seda dokumenti selgitavas aknas. Märkus Dokumendi kustutamiseks loendist Minu juhise loend (List of My Manual) valige loendist dokumendi pealkiri ja klõpsake seejärel Kustuta (Delete) (või vajutage klahvi Delete).
Juhendis kasutatavad tingmärgid Lehekülg 97 / 707 Põhjalik juhend > Käesoleva juhendi kasutamine > Juhendis kasutatavad tingmärgid Juhendis kasutatavad tingmärgid Hoiatus! Juhised, mille eiramisel võivad hälbed seadme töös põhjustada surma või tõsiseid kehavigastusi. Seadme ohutuks kasutamiseks tuleb antud juhiseid järgida. Ettevaatust Juhised, mille eiramisel võivad hälbed seadme töös põhjustada kehavigastusi või materiaalset kahju. Seadme ohutuks kasutamiseks tuleb antud juhiseid järgida.
Kaubamärgid ja litsentsid Lehekülg 98 / 707 Põhjalik juhend > Käesoleva juhendi kasutamine > Kaubamärgid ja litsentsid Kaubamärgid ja litsentsid Microsoft on ettevõtte Microsoft Corporation registreeritud kaubamärk. Windows on ettevõtte Microsoft Corporation kaubamärk, mis on registreeritud USA-s ja teistes riikides. Windows Vista on ettevõtte Microsoft Corporation kaubamärk, mis on registreeritud USA-s ja/või teistes riikides.
Arvutist printimine Lehekülg 99 / 707 Põhjalik juhend > Arvutist printimine Arvutist printimine Printimine sidustarkvaraga Printimine muu rakendustarkvaraga Lehekülje algusesse
Printimine sidustarkvaraga Lehekülg 100 / 707 Põhjalik juhend > Arvutist printimine > Printimine sidustarkvaraga Printimine sidustarkvaraga Mis on Easy-PhotoPrint EX? Fotode printimine Albumi loomine Kalendrite printimine Kleebiste printimine Prindipaigutus Fotode parandamine ja töötlemine Videotest piltide loomine Piltide allalaadimine fotode jagamise saitidelt Küsimused ja vastused Foto printimise sätted Muud sätted Lehekülje algusesse
What Is Easy-PhotoPrint EX? Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > What Is Easy-PhotoPrint EX? A000 What Is Easy-PhotoPrint EX? Easy-PhotoPrint EX allows you to create albums, calendars and stickers easily using photos taken with digital cameras. You can also print borderless photos easily. Important Easy-PhotoPrint EX can only be used with Canon inkjet printers. It does not support some Canon compact photo printers, including SELPHY CP series.
What Is Easy-PhotoPrint EX? MP Navigator EX Ver.1.00 or later supports the following functions. - Photo Print - Album ZoomBrowser EX Ver.6.0 or later supports the following functions. - Photo Print - Album ZoomBrowser EX Ver.5.8 or later supports the following function. - Album Digital Photo Professional Ver.3.2 or later supports the following function.
What Is Easy-PhotoPrint EX? Lehekülg 103 / 707 File Formats (Extensions) Supported by Easy-PhotoPrint EX Easy-PhotoPrint EX Photo Print file (.el6) Easy-PhotoPrint EX Album file (.el1) Easy-PhotoPrint EX Stickers file (.el2) Easy-PhotoPrint EX Calendar file (.el4) Easy-PhotoPrint EX Layout file (.
Printing Photos Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos A010 Printing Photos Easy-PhotoPrint EX allows you to print your favorite photos in a variety of layouts. You can also create borderless photos easily. Corrections suitable for photos can be applied automatically when printing. Steps 1. Starting Easy-PhotoPrint EX 2. Selecting a Photo 3. Selecting the Paper 4.
Printing Photos Lehekülg 105 / 707 How Can I Move (or Copy) the Saved File? Which Side of the Displayed Image Does the Printing Start from? How Do I Print with Even Margins? Page top
Starting Easy-PhotoPrint EX Lehekülg 106 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Starting Easy-PhotoPrint EX A011 Starting Easy-PhotoPrint EX 1. From the Start menu, select All Programs > Canon Utilities > Easy-PhotoPrint EX > Easy-PhotoPrint EX. Easy-PhotoPrint EX starts and Menu appears.
Selecting a Photo Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Selecting a Photo A012 Selecting a Photo 1. Click Photo Print from Menu. The Select Images screen appears. Important The thumbnails (reduced images) displayed in the screen may appear as follows: - A black line appears along an edge of the image. - An edge of the image appears cropped.
Selecting a Photo Lehekülg 108 / 707 3. Click the image you want to print. The number of copies appears as "1" below the clicked image, while the selected image itself will appear in the selected image area. Note To delete an image in the selected image area, select the image you want to delete and click (Delete Imported Image). To delete all images from the selected image area, click To print two or more copies of an image, click (Delete All Imported Images).
Selecting the Paper Lehekülg 109 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Selecting the Paper A013 Selecting the Paper 1. Click Select Paper. The Select Paper screen appears. 2. Set the following items according to the printer and paper to be used: Printer Paper Source Paper Size Media Type Note The paper sizes and media types may vary depending on the printer. See Help for details.
Printing Lehekülg 110 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Printing A014 Printing 1. Click Layout/Print. The Layout/Print screen appears. Important The thumbnails (reduced images) displayed in the screen may appear as follows: - A black line appears along an edge of the image. - An edge of the image appears cropped.
Printing Lehekülg 111 / 707 How Do I Print with Even Margins? Note You can crop images or print dates on photos. Cropping Photos (Photo Print) Printing Dates on Photos (Photo Print) You can correct or enhance the selected image before printing. Correcting and Enhancing Photos You can specify advanced Photo Print settings (number of copies, print quality, etc.) in the Preferences dialog box. To display the Preferences dialog box, click (Settings) or select Preferences... from the File menu.
Creating an Album Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album A020 Creating an Album Easy-PhotoPrint EX allows you to create your own personalized photo album. Steps 1. Starting Easy-PhotoPrint EX 2. Selecting the Paper and Layout 3. Selecting a Photo 4. Editing 5.
Creating an Album Lehekülg 113 / 707 Questions and Answers How Can I Move (or Copy) the Saved File? What Is "C1" or "C4"? Page top
Starting Easy-PhotoPrint EX Lehekülg 114 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Starting Easy-PhotoPrint EX A021 Starting Easy-PhotoPrint EX 1. From the Start menu, select All Programs > Canon Utilities > Easy-PhotoPrint EX > Easy-PhotoPrint EX. Easy-PhotoPrint EX starts and Menu appears.
Selecting the Paper and Layout Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Selecting the Paper and Layout A022 Selecting the Paper and Layout 1. Click Album from Menu. The Page Setup screen appears. 2. Set the following items in the General Settings section: Paper Size Orientation Cover Double page album Page number Note See Help on the paper size that can be selected.
Selecting the Paper and Layout Lehekülg 116 / 707 4. If you want to change the layout, click Layout.... The Change Layout dialog box appears. In the Change Layout dialog box, you can change the layout or select whether to print the date (on which the picture was taken) on the photo. Note The layouts that can be selected may vary depending on the Paper Size, Orientation, Double page album, or the type of page selected (front cover, inside pages or back cover).
Selecting a Photo Lehekülg 117 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Selecting a Photo A023 Selecting a Photo 1. Click Select Images. The Select Images screen appears. 2. Select the folder that contains the image you want to print from the folder tree area. The images in the folder will be displayed as thumbnails (miniatures).
Selecting a Photo Lehekülg 118 / 707 The selected image(s) is (are) displayed in the selected image area. You can also select the image(s) you want to print by dragging it (them) into the selected image area. Note To delete an image in the selected image area, select the image you want to delete and click (Delete Imported Image). To delete all images from the selected image area, click (Delete All Imported Images). Note You can correct or enhance the selected image before printing.
Editing Lehekülg 119 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Editing A024 Editing 1. Click Edit. The Edit screen appears. 2. Edit your album if necessary.
Editing Lehekülg 120 / 707 C3: Inside the back cover C4: Back cover "C2"/"C3" appears only when the Leave the inside of front cover blank/Leave the inside of back cover blank checkbox is selected in the Cover Options dialog box. Saving Note See Help for details on the Edit screen.
Printing Lehekülg 121 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Printing A025 Printing 1. Click Print Settings. The Print Settings screen appears. 2. Set the following items according to the printer and paper to be used: Printer Media Type Copies Paper Source Print Quality Borderless Printing Note The media types may vary depending on the printer and the paper size.
Printing Lehekülg 122 / 707 3. Click Print. Note See Help for details on the Print Settings screen.
Printing Calendars Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars A040 Printing Calendars Easy-PhotoPrint EX allows you to create your own calendar using your favorite photos. Steps 1. Starting Easy-PhotoPrint EX 2. Selecting the Paper and Layout 3. Selecting a Photo 4. Editing 5.
Printing Calendars Lehekülg 124 / 707 Opening Saved Files Questions and Answers How Can I Move (or Copy) the Saved File? Page top
Starting Easy-PhotoPrint EX Lehekülg 125 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Starting Easy-PhotoPrint EX A041 Starting Easy-PhotoPrint EX 1. From the Start menu, select All Programs > Canon Utilities > Easy-PhotoPrint EX > Easy-PhotoPrint EX. Easy-PhotoPrint EX starts and Menu appears.
Selecting the Paper and Layout Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Selecting the Paper and Layout A042 Selecting the Paper and Layout 1. Click Calendar from Menu. The Page Setup screen appears. 2. Set the following items in the General Settings section: Paper Size Orientation Start from Period Note See Help on the paper size that can be selected. You can add holidays to your calendar. Setting Holidays 3.
Selecting the Paper and Layout Lehekülg 127 / 707 Note See Help for details on the Page Setup screen.
Selecting a Photo Lehekülg 128 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Selecting a Photo A043 Selecting a Photo 1. Click Select Images. The Select Images screen appears. 2. Select the folder that contains the image you want to print from the folder tree area. The images in the folder will be displayed as thumbnails (miniatures). Note You can also use still images captured from videos.
Selecting a Photo Lehekülg 129 / 707 Note You can correct or enhance the selected image before printing. Correcting and Enhancing Photos See Help for details on the Select Images screen.
Editing Lehekülg 130 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Editing A044 Editing 1. Click Edit. The Edit screen appears. 2. Edit the calendar if necessary.
Editing Lehekülg 131 / 707 See Help for details on the Edit screen.
Printing Lehekülg 132 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Printing A045 Printing 1. Click Print Settings. The Print Settings screen appears. 2. Set the following items according to the printer and paper to be used: Printer Media Type Copies Paper Source Print Quality Borderless Printing Note The media types may vary depending on the printer and the paper size.
Printing Lehekülg 133 / 707 3. Click Print. Note See Help for details on the Print Settings screen.
Printing Stickers Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers A050 Printing Stickers You can print your favorite photos on compatible sticker sheets. Steps 1. Starting Easy-PhotoPrint EX 2. Selecting the Paper and Layout 3. Selecting a Photo 4. Editing 5.
Printing Stickers Lehekülg 135 / 707 Page top
Starting Easy-PhotoPrint EX Lehekülg 136 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Starting Easy-PhotoPrint EX A051 Starting Easy-PhotoPrint EX 1. From the Start menu, select All Programs > Canon Utilities > Easy-PhotoPrint EX > Easy-PhotoPrint EX. Easy-PhotoPrint EX starts and Menu appears.
Selecting the Paper and Layout Lehekülg 137 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Selecting the Paper and Layout A052 Selecting the Paper and Layout 1. Click Stickers from Menu. The Page Setup screen appears. 2. Set the following items in the General Settings section: Paper Size Orientation Print date Use the same image in all frames Note Paper sizes other than Photo Stickers cannot be selected.
Selecting a Photo Lehekülg 138 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Selecting a Photo A053 Selecting a Photo 1. Click Select Images. The Select Images screen appears. 2. Select the folder that contains the image you want to print from the folder tree area. The images in the folder will be displayed as thumbnails (miniatures). Note You can also use still images captured from videos.
Selecting a Photo Lehekülg 139 / 707 Note You can correct or enhance the selected image before printing. Correcting and Enhancing Photos See Help for details on the Select Images screen.
Editing Lehekülg 140 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Editing A054 Editing 1. Click Edit. The Edit screen appears. 2. Edit the stickers if necessary.
Printing Lehekülg 141 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Printing A055 Printing 1. Click Print Settings. The Print Settings screen appears. 2. Set the following items according to the printer and paper to be used: Printer Media Type Copies Paper Source Print Quality Borderless Printing Note The media types may vary depending on the printer and the paper size.
Printing Lehekülg 142 / 707 See Help for details on the Print Settings screen.
Printing Layout Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout A150 Printing Layout You can add text to your favorite photos and print them in a variety of layouts. Steps 1. Starting Easy-PhotoPrint EX 2. Selecting the Paper and Layout 3. Selecting a Photo 4. Editing 5.
Printing Layout Lehekülg 144 / 707 How Can I Move (or Copy) the Saved File? Page top
Starting Easy-PhotoPrint EX Lehekülg 145 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Starting Easy-PhotoPrint EX A151 Starting Easy-PhotoPrint EX 1. From the Start menu, select All Programs > Canon Utilities > Easy-PhotoPrint EX > Easy-PhotoPrint EX. Easy-PhotoPrint EX starts and Menu appears.
Selecting the Paper and Layout Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Selecting the Paper and Layout A152 Selecting the Paper and Layout 1. Click Layout Print from Menu. The Page Setup screen appears. 2. Set the following items in the General Settings section: Paper Size Orientation Print date Note See Help on the paper size that can be selected. You can customize the date (position, size, color, etc.
Selecting the Paper and Layout Lehekülg 147 / 707 Page top
Selecting a Photo Lehekülg 148 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Selecting a Photo A153 Selecting a Photo 1. Click Select Images. The Select Images screen appears. 2. Select the folder that contains the image you want to print from the folder tree area. The images in the folder will be displayed as thumbnails (miniatures). Note You can also use still images captured from videos.
Selecting a Photo Lehekülg 149 / 707 Note You can correct or enhance the selected image before printing. Correcting and Enhancing Photos See Help for details on the Select Images screen.
Editing Lehekülg 150 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Editing A154 Editing 1. Click Edit. The Edit screen appears. 2. Edit the layout if necessary.
Editing Lehekülg 151 / 707 Page top
Printing Lehekülg 152 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Printing A155 Printing 1. Click Print Settings. The Print Settings screen appears. 2. Set the following items according to the printer and paper to be used: Printer Media Type Copies Paper Source Print Quality Borderless Printing Note The media types may vary depending on the printer and the paper size.
Printing Lehekülg 153 / 707 3. Click Print. Note See Help for details on the Print Settings screen.
Correcting and Enhancing Photos Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos A060 Correcting and Enhancing Photos You can correct and enhance images. (Correct/Enhance Images) in the Select Images or Edit screen, or in the Layout/Print screen of Click Photo Print. You can make the following corrections and enhancements in the Correct/Enhance Images window.
Correcting and Enhancing Photos Lehekülg 155 / 707 You can also blur the outline of the subjects or remove the base color.
Using the Auto Photo Fix Function Lehekülg 156 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Auto Photo Fix Function A066 Using the Auto Photo Fix Function This function will automatically analyze the captured scene and apply suitable corrections. Important The Auto Photo Fix function is not available for Photo Print.
Using the Auto Photo Fix Function Lehekülg 157 / 707 The image appears in Preview. Note If only one image is selected, the thumbnail list does not appear below Preview. 3. Make sure that Auto is selected. 4. Click Auto Photo Fix, then click OK. The entire photo is corrected automatically and the the upper left of the image. (Correction/Enhancement) mark appears on Note (Compare) to display the images before and after the correction side by side so that Click you can compare and check the result.
Using the Red-Eye Correction Function Lehekülg 158 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Red-Eye Correction Function A061 Using the Red-Eye Correction Function You can correct red eyes caused by a camera flash. You can perform the Red-Eye Correction function either automatically or manually. Note Photo Print allows you to automatically correct red eyes when printing.
Using the Red-Eye Correction Function Lehekülg 159 / 707 Auto Correction 3. Make sure that Auto is selected. 4. Click Red-Eye Correction. 5. Click OK. Red eyes are corrected and the the image. (Correction/Enhancement) mark appears on the upper left of Important Areas other than the eyes may be corrected depending on the image. Note (Compare) to display the images before and after the correction side by side so that Click you can compare and check the result.
Using the Red-Eye Correction Function Red eye is corrected and the Lehekülg 160 / 707 (Correction/Enhancement) mark appears on the upper left of the image. Note (Compare) to display the images before and after the correction side by side so that Click you can compare and check the result. Click Undo to undo the preceding correction operation. 6. Click Save Selected Image or Save All Corrected Images. You can save corrected images as new files.
Using the Face Brightener Function Lehekülg 161 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Face Brightener Function A062 Using the Face Brightener Function You can brighten dark faces caused by bright background. Note You can brighten dark photos caused by bright background automatically by selecting Auto Photo Fix.
Using the Face Brightener Function Lehekülg 162 / 707 3. Click Manual, then click Correct/Enhance. 4. Click Face Brightener. Note Effect levels can be changed using the slider below Face Brightener. Move the cursor over the image. The shape of the cursor changes to (Cross). 5. Drag to select the area you want to correct, then click OK that appears over the image.
Using the Face Brightener Function Lehekülg 163 / 707 Important The corrections will be lost if you exit before saving corrected images.
Using the Face Sharpener Function Lehekülg 164 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Face Sharpener Function A063 Using the Face Sharpener Function You can sharpen out-of-focus faces in a photo. You can perform the Face Sharpener function either automatically or manually. 1. Select photos in the Select Images screen, then click (Correct/Enhance Images). The Correct/Enhance Images window appears.
Using the Face Sharpener Function Lehekülg 165 / 707 4. Click Face Sharpener. Note Effect levels can be changed using the slider below Face Sharpener. 5. Click OK. The face is sharpened and the (Correction/Enhancement) mark appears on the upper left of the image. Note (Compare) to display the images before and after the correction side by side so that Click you can compare and check the result. Click Reset Selected Image to undo the correction operation.
Using the Face Sharpener Function The facial area in and around the selected area is sharpened and the Enhancement) mark appears on the upper left of the image. Lehekülg 166 / 707 (Correction/ Note You can also drag to rotate the selected area. (Compare) to display the images before and after the correction side by side so that Click you can compare and check the result. Click Undo to undo the preceding correction operation. 6. Click Save Selected Image or Save All Corrected Images.
Using the Digital Face Smoothing Function Lehekülg 167 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Digital Face Smoothing Function A064 Using the Digital Face Smoothing Function You can enhance skin beautifully by removing blemishes and wrinkles. You can perform the Digital Face Smoothing function either automatically or manually. 1.
Using the Digital Face Smoothing Function Lehekülg 168 / 707 4. Click Digital Face Smoothing. Note Effect levels can be changed using the slider below Digital Face Smoothing. 5. Click OK. Skin is enhanced beautifully and the of the image. (Correction/Enhancement) mark appears on the upper left Note (Compare) to display the images before and after the enhancement side by side so Click that you can compare and check the result. Click Reset Selected Image to undo the enhancement operation.
Using the Digital Face Smoothing Function Skin in and around the selected area is enhanced beautifully and the mark appears on the upper left of the image. Lehekülg 169 / 707 (Correction/Enhancement) Note You can also drag to rotate the selected area. (Compare) to display the images before and after the enhancement side by side so Click that you can compare and check the result. Click Undo to undo the preceding enhancement operation. 6. Click Save Selected Image or Save All Corrected Images.
Using the Blemish Remover Function Lehekülg 170 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Blemish Remover Function A065 Using the Blemish Remover Function You can remove moles. 1. Select photos in the Select Images screen, then click (Correct/Enhance Images). The Correct/Enhance Images window appears.
Using the Blemish Remover Function Lehekülg 171 / 707 Note Move the cursor over the image. The shape of the cursor changes to (Cross). 5. Drag to select the area you want to enhance, then click OK that appears over the image. Moles in and around the selected area are removed and the appears on the upper left of the image. (Correction/Enhancement) mark Note (Compare) to display the images before and after the enhancement side by side so Click that you can compare and check the result.
Adjusting Images Lehekülg 172 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Adjusting Images A067 Adjusting Images You can make fine adjustments to the overall brightness, contrast, etc. of images. 1. Select photos in the Select Images screen, then click (Correct/Enhance Images). The Correct/Enhance Images window appears.
Adjusting Images Lehekülg 173 / 707 Contrast Sharpness Blur Show-through Removal Note (Compare) to display the images before and after the adjustment side by side so that Click you can compare and check the result. Click Advanced to make fine adjustments to the image brightness and color tone. See " Advanced " in the descriptions of the Correct/Enhance Images window for details. Click Defaults to reset all adjustments. 5. Click Save Selected Image or Save All Corrected Images.
Correct/Enhance Images Window Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Correct/Enhance Images Window A068 Correct/Enhance Images Window You can correct/enhance images in this window. (Correct/Enhance Images) in the Select To display the Correct/Enhance Images window, click Images or Edit screen, or in the Layout/Print screen of Photo Print.
Correct/Enhance Images Window Lehekülg 175 / 707 Auto Photo Fix Applies automatic corrections suitable for photos. Important The Auto Photo Fix function is not available for Photo Print. Photo Print allows you to automatically apply suitable corrections to all photos when printing, by selecting Enable Auto Photo Fix in Color correction for printing on the Advanced tab of the Preferences dialog box. To display the Preferences dialog box, click Preferences... from the File menu.
Correct/Enhance Images Window Automatically corrects/enhances all images displayed in the thumbnail list. OK Applies the selected effect to the selected image or all images. Reset Selected Image Cancels all corrections and enhancements applied to the selected image. Save Selected Image Saves the corrected/enhanced image (the selected one). Save All Corrected Images Saves all the corrected/enhanced images displayed in the thumbnail list. Exit Click to close the Correct/Enhance Images window.
Correct/Enhance Images Window Removes show-through of text from the reverse side or removes the base color. Adjust the showthrough level to prevent text on the reverse side of thin document or the base color of the document from appearing on the image. Move the slider to the right to increase the show-through removal effect. Advanced Opens the Advanced Adjustment dialog box in which you can make fine adjustments to the image brightness and color tone.
Correct/Enhance Images Window color tone are adjusted in the Advanced Adjustment dialog box. Defaults Resets each adjustment (brightness, contrast, sharpness, blur, and show-through removal). Reset Selected Image Cancels all corrections, enhancements and adjustments applied to the selected image. Save Selected Image Saves the corrected/enhanced/adjusted image (the selected one). Save All Corrected Images Saves all the corrected/enhanced/adjusted images displayed in the thumbnail list.
Correct/Enhance Images Window Lehekülg 179 / 707 Removes moles in the selected area. OK Applies the selected effect to the specified area. Undo Cancels the latest correction/enhancement. Reset Selected Image Cancels all corrections, enhancements and adjustments applied to the selected image. Save Selected Image Saves the corrected/enhanced/adjusted image (the selected one). Save All Corrected Images Saves all the corrected/enhanced/adjusted images displayed in the thumbnail list.
Creating Still Images from Videos Lehekülg 180 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating Still Images from Videos A160 Creating Still Images from Videos You can capture video frames and create still images. Important This function is supported under Windows XP or later. However, it is not supported under the 64-bit editions of Windows XP. This function is not available when ZoomBrowser EX Ver.6.
Creating Still Images from Videos Lehekülg 181 / 707 Note Only MOV format videos recorded with Canon digital cameras are displayed. The selected video plays. 3. Select the video from which you want to capture still images and click OK. The selected video plays in Preview of the Video Frame Capture window. Note (Pause) appears while a video plays, and video is stopped. (Pause) and Use the frame you want to capture. (Playback) appears while a (Frame backward/Frame advance) to display 4.
Creating Still Images from Videos Lehekülg 182 / 707 Display the Auto Frame Capture Settings area, then use (Set start time/Set end time) in the Preview area to specify the time range. In the Auto Frame Capture Settings area, select a capture method and click Capture. You can correct the captured still images in the Correct Captured Frames window. To display the Correct Captured Frames window, select the image(s) you want to correct in the Captured frame(s) area, then click (Correct image).
Video Frame Capture/Movie Print Window Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating Still Images from Videos > Video Frame Capture/Movie Print Window A161 Video Frame Capture/Movie Print Window You can capture video frames and create still images in these windows. In the Movie Print window, you can print the captured still images. Important This function is supported under Windows XP or later.
Video Frame Capture/Movie Print Window Print Area You can print the captured still images. Note This function is available only when the Movie Print window is displayed via Solution Menu EX. Media Type Displays the media type specified in the Print Settings dialog box. Page Size Displays the paper size specified in the Print Settings dialog box. Print Settings Displays the Print Settings dialog box in which you can make the basic print settings (select printer/ media, etc.).
Video Frame Capture/Movie Print Window Lehekülg 185 / 707 Select Video Displays the Select Video dialog box. Select a folder, then select the video from which you want to capture still images. Save Saves the still images selected in the Captured frame(s) area. Exit Click to close the Video Frame Capture/Movie Print window. (2) Preview Area The video selected in the Select Video dialog box appears in Preview. (Frame backward/Frame advance) Click to reverse/advance one frame and pause.
Video Frame Capture/Movie Print Window When you select an image, a checkmark appears in its checkbox. (Clear all check-marks) Cancels all image selections in the Captured frame(s) area. (Correct image) Displays the Correct Captured Frames window in which you can correct all the images selected in the Captured frame(s) area. Note When a frame in which the subject or camera has moved significantly is captured, the image may not be corrected properly.
Video Frame Capture/Movie Print Window Lehekülg 187 / 707 (2) Toolbar (Reduce/Enlarge frame) Reduces or enlarges the displayed image. (Whole frame) Displays the entire image in Preview. (Compare) Displays the Compare Captured Frames window. You can compare the images before and after the correction side by side. The image before the correction is displayed on the left, and the image after the correction is displayed on the right of the window.
Downloading Images from Photo Sharing Sites Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Downloading Images from Photo Sharing Sites A170 Downloading Images from Photo Sharing Sites You can search for images on photo sharing sites on the Internet and download the images you want to print. Important Internet connection is required to use this function. Internet connection fees apply.
Downloading Images from Photo Sharing Sites Lehekülg 189 / 707 (Add Image). When you click (Import photos from photo sharing sites), a message about created works and personality rights appear. To hide the message, select the Do not show this message again checkbox. See " Import Photos from Photo Sharing Sites Window " for details on the Import Photos from Photo Sharing Sites window. 2. Enter the search text in Search. 3. Set Sort by, Number of Results per Page and License Type. 4. Click Start Search.
Import Photos from Photo Sharing Sites Window Lehekülg 190 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Downloading Images from Photo Sharing Sites > Import Photos from Photo Sharing Sites Window A171 Import Photos from Photo Sharing Sites Window In this window, you can search for images on photo sharing sites on the Internet and download the images you want to print. Important Internet connection is required to use this function.
Import Photos from Photo Sharing Sites Window Sort by Select how to sort the search results in the Thumbnail window. Select Popularity or Date. You cannot change the setting after a search. Number of Results per Page Select the number of images displayed in the Thumbnail window, from 10, 20 and 30. You cannot change the setting after a search. License Type Select the license type of images to search for, from All types, CC license (Non-Commercial) and CC license (Others).
Import Photos from Photo Sharing Sites Window Commercial work along with your creation. - You may not use the work for commercial purposes. - Even if your creation is built upon the work of others, you must apply the same conditions to it as those set out for the original work by the licensor. Share Alike (CC license) Attribution (CC CC license (Others) - You must show the title and licensor of the original work along with your creation.
Import Photos from Photo Sharing Sites Window Lehekülg 193 / 707 thumbnail. To select an image, click the thumbnail or checkbox. Important Due to limitations of photo sharing sites, if the search results exceed 4,000 images, the same images as those displayed in the page containing the 4,001st image will be displayed in all the subsequent pages. For example, when Number of Results per Page is set to 20, the images displayed in page 201 are the same as those displayed in page 202 and subsequent pages.
Questions and Answers Lehekülg 194 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers A200 Questions and Answers How Can I Move (or Copy) the Saved File? Which Side of the Displayed Image Does the Printing Start from? How Do I Print with Even Margins? What Is "C1" or "C4"? Page top
How Can I Move (or Copy) the Saved File? Lehekülg 195 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers > How Can I Move (or Copy) the Saved File? A095 How Can I Move (or Copy) the Saved File? If you want to move (or copy) a file created and saved with Easy-PhotoPrint EX from one folder to another, you need to move (or copy) the folder that was automatically created when originally saving that file as well.
Which Side of the Displayed Image Does the Printing Start from? Lehekülg 196 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers > Which Side of the Displayed Image Does the Printing Start from? A096 Which Side of the Displayed Image Does the Printing Start from? As shown below, printing starts from the left side of the image displayed in the Layout/Print screen. Outputs the paper in the direction as the arrow indicates.
How Do I Print with Even Margins? Lehekülg 197 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers > How Do I Print with Even Margins? A097 How Do I Print with Even Margins? When you print on a bordered layout, the margins on the left and right or the top and bottom may become wider than the other, depending on the image and printer.
What Is "C1" or "C4"? Lehekülg 198 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers > What Is "C1" or "C4"? A098 What Is "C1" or "C4"? When an album is printed, labels such as "C1" and "C4" are printed as page numbers. The "C1" and "C4" represent the front cover and back cover, respectively.
Photo Print Settings Lehekülg 199 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings A101 Photo Print Settings Printing Vivid Photos Reducing Photo Noise Cropping Photos (Photo Print) Printing Dates on Photos (Photo Print) Printing Multiple Photos on One Page Printing an Index Printing ID Photos (ID Photo Print) Printing Photo Information Saving Photos Opening Saved Files Page top
Printing Vivid Photos Lehekülg 200 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Printing Vivid Photos A071 Printing Vivid Photos Select the Vivid Photo checkbox in the Select Paper screen to boost the colors in a photo before printing. Important This function is available only with a printer that supports Vivid Photo.
Reducing Photo Noise Lehekülg 201 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Reducing Photo Noise A072 Reducing Photo Noise When a photo is taken in a dark location such as night scene using digital camera, noise may appear in the image. Select the Photo Noise Reduction checkbox in the Select Paper screen to reduce noise in the image and make the printed photos more vivid.
Cropping Photos (Photo Print) Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Cropping Photos (Photo Print) A073 Cropping Photos (Photo Print) Cropping a photo is the act of removing the unnecessary portions of the photo by selecting the necessary portions. Click (Crop Image) in the Layout/Print screen or double-click the preview image. Drag the white squares on the image to adjust the area to be cropped and click OK.
Cropping Photos (Photo Print) Lehekülg 203 / 707 Page top
Printing Dates on Photos (Photo Print) Lehekülg 204 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Printing Dates on Photos (Photo Print) A074 Printing Dates on Photos (Photo Print) To print the date the photo was taken on the photo, click (Date Settings) in the Layout/Print screen, then select the Print date checkbox in the Date Settings dialog box. Note The date is displayed in the short date format (mm/dd/yyyy, etc.
Printing Multiple Photos on One Page Lehekülg 205 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Printing Multiple Photos on One Page A076 Printing Multiple Photos on One Page You can print multiple photos on one page by selecting a multiple-photo layout in the Layout/Print screen. Note See the following section for details on how to select photos.
Printing an Index Lehekülg 206 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Printing an Index A077 Printing an Index You can print an index of selected photos. An index print shows the thumbnails of the photos in one page. It is convenient for managing your photos. To print an index, select Index from the layouts in the Layout/Print screen. Important Index cannot be printed if you select any of the following paper sizes.
Printing an Index Lehekülg 207 / 707 Page top
Printing ID Photos (ID Photo Print) Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Printing ID Photos (ID Photo Print) A078 Printing ID Photos (ID Photo Print) You can print a variety of ID photos. Important The photo may not qualify as an official ID photo depending on its use. For details, contact the party to whom you will be submitting the photo.
Printing ID Photos (ID Photo Print) To display the Preferences dialog box, click Lehekülg 209 / 707 (Settings) or select Preferences... from the File menu. ID photos can only be printed on 4"x6" 10x15cm paper.
Printing Photo Information Lehekülg 210 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Printing Photo Information A079 Printing Photo Information You can print the photo and the Exif information side by side. To print them, select Letter 8.5"x11" or A4 for Paper Size in the Select Paper screen, and select Captured Info from the layouts in the Layout/Print screen.
Saving Photos Lehekülg 211 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Saving Photos A092 Saving Photos You can save edited photos. The information of cropping and layout can be saved. Click Save in the Layout/Print screen. When the Save As dialog box appears, specify the save location and file name, then click Save. Important If you edit a saved file and save it again, the file will be overwritten.
Opening Saved Files Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Photo Print Settings > Opening Saved Files A093 Opening Saved Files You can open files created with Easy-PhotoPrint EX. 1. Click Library from Menu. The Open dialog box appears. You can check files created and saved with Easy-PhotoPrint EX in icon view (only for Windows 7/ Windows Vista) or thumbnail view.
Opening Saved Files Lehekülg 213 / 707 Page top
Other Settings Lehekülg 214 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings A102 Other Settings Changing Layout Changing Background Adding Photos Swapping Positions of Photos Replacing Photos Changing Position, Angle and Size of Photos Cropping Photos Framing Photos Printing Dates on Photos Attaching Comments to Photos Adding Text to Photos Saving Setting Holidays Setting Calendar Display Opening Saved Files Page top
Changing Layout Lehekülg 215 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Changing Layout A080 Changing Layout You can change the layout of each page separately. Select the page you want to change the layout of in the Edit screen, then click (Change Layout). Select the layout you want to use in the Change Layout dialog box and click OK.
Changing Layout Lehekülg 216 / 707 Important The layouts of all pages are changed to the selected layout. All images that do not fit in the new layout will be collected on the last page. Note The layouts that can be selected may vary depending on the Paper Size and Orientation.
Changing Layout Lehekülg 217 / 707 Page top
Changing Background Lehekülg 218 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Changing Background A081 Changing Background You can change the background of each page. Important You cannot change the background of the Stickers and Layout Print. Click Background... in the Page Setup screen or select the page you want to change the background of in the Edit screen, then click (Change Background).
Changing Background Select from samples will be displayed only if Album has been selected. Various backgrounds are available on our website besides those saved in the application. Click Search backgrounds... to access the Canon website from which you can download additional materials for free. Internet connection is required to access the website. Internet connection fees apply. Exit Easy-PhotoPrint EX before installing backgrounds.
Changing Background Lehekülg 220 / 707 Note See Help for details on how to set the background in the Change Background dialog box.
Adding Photos Lehekülg 221 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Adding Photos A082 Adding Photos You can add images to pages. Select the page you want to add photos to in the Edit screen, then click (Add Image). Note The screen(s) for Album printing is (are) used as example(s) in the following descriptions. The screen(s) may vary depending on what you create.
Adding Photos Lehekülg 222 / 707 Page top
Swapping Positions of Photos Lehekülg 223 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Swapping Positions of Photos A083 Swapping Positions of Photos You can swap the positions of images. Click (Swap Image Positions) in the Edit screen. Note The screen(s) for Album printing is (are) used as example(s) in the following descriptions. The screen(s) may vary depending on what you create.
Replacing Photos Lehekülg 224 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Replacing Photos A084 Replacing Photos You can replace an image with another image. Select the image you want to replace in the Edit screen, then click (Replace Selected Image). Note The screen(s) for Album printing is (are) used as example(s) in the following descriptions. The screen(s) may vary depending on what you create.
Changing Position, Angle and Size of Photos Lehekülg 225 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Changing Position, Angle and Size of Photos A085 Changing Position, Angle and Size of Photos You can adjust the position, angle and size of images. (Edit Select the image of which you want to change the position or size in the Edit screen and click Image) or double-click the image.
Cropping Photos Lehekülg 226 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Cropping Photos A086 Cropping Photos Cropping an image is the act of removing the unnecessary portions of the image by selecting the necessary portions. Select the image you want to crop in the Edit screen and click image. (Edit Image) or double-click the Click the Crop tab in the Edit Image dialog box.
Framing Photos Lehekülg 227 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Framing Photos A087 Framing Photos You can add frames to images. Important You cannot add frames to images in Stickers and Layout Print. Select the image you want to frame in the Edit screen and click image. (Edit Image) or double-click the Click the Frame tab in the Edit Image dialog box.
Framing Photos Lehekülg 228 / 707 Select the Apply to all images in the page checkbox to add the same frame to all the images on a selected page at one time. Various frames are available on our website besides those saved in the application. Click Search frames... to access the Canon website from which you can download additional materials for free. Internet connection is required to access the website. Internet connection fees apply. Exit Easy-PhotoPrint EX before installing frames. Search frames...
Printing Dates on Photos Lehekülg 229 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Printing Dates on Photos A088 Printing Dates on Photos You can print dates on images. Select the image you want to print the date on in the Edit screen and click click the image. (Edit Image) or double- Click the Date tab in the Edit Image dialog box. Note The screen(s) for Album printing is (are) used as example(s) in the following descriptions.
Printing Dates on Photos Lehekülg 230 / 707 Page top
Attaching Comments to Photos Lehekülg 231 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Attaching Comments to Photos A089 Attaching Comments to Photos You can attach comments to images and display them in your album. The photo name, shooting date and comments are displayed (from top to bottom) in a comment box. Important You cannot attach comments to Calendar, Stickers, and Layout Print.
Attaching Comments to Photos Lehekülg 232 / 707 Select the Show comment box checkbox. Select the checkboxes of the items you want to display, and enter comments. Set the size and color of font, and position of the comments, etc., then click OK. Note See Help for details on comments.
Adding Text to Photos Lehekülg 233 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Adding Text to Photos A090 Adding Text to Photos You can add text to photos. Click (Add Text) in the Edit screen and drag the mouse over the area in which you want to add text. Note The screen(s) for Album printing is (are) used as example(s) in the following descriptions. The screen(s) may vary depending on what you create.
Saving Lehekülg 234 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Saving A091 Saving You can save edited items. Click Save in the Edit or Print Settings screen. Note The screen(s) for Album printing is (are) used as example(s) in the following descriptions. The screen(s) may vary depending on what you create. When the Save As dialog box appears, specify the save location and file name, then click Save.
Setting Holidays Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Setting Holidays A099 Setting Holidays You can add holidays to your calendar. Click Set Holidays... in the Page Setup screen of Calendar, or click (Setup Period/Holiday) in the Edit screen and click Set Holidays... in the Calendar General Settings dialog box to display the Holiday Settings dialog box. To add a holiday, click Add.... The Add/Edit Holiday dialog box appears.
Setting Holidays Lehekülg 236 / 707 Enter the name in Holiday Name and specify the date. Select the Set as Holiday checkbox to display that day as a holiday in your calendar. Note See Help for details on each dialog box.
Setting Calendar Display Lehekülg 237 / 707 Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Setting Calendar Display A100 Setting Calendar Display You can customize the calendar display (fonts, lines, colors, position, size, etc.). Click Settings... in the Page Setup screen of Calendar, or select a calendar in the Edit screen and click (Setup Calendar) to display the Calendar Settings dialog box.
Opening Saved Files Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Other Settings > Opening Saved Files A103 Opening Saved Files You can open files created with Easy-PhotoPrint EX. 1. Click Library from Menu. The Open dialog box appears. You can check files created and saved with Easy-PhotoPrint EX in icon view (only for Windows 7/ Windows Vista) or thumbnail view.
Opening Saved Files Lehekülg 239 / 707 Easy-PhotoPrint EX supports the following file formats (extensions). - Easy-PhotoPrint EX Album file (.el1) - Easy-PhotoPrint EX Stickers file (.el2) - Easy-PhotoPrint EX Calendar file (.el4) - Easy-PhotoPrint EX Layout file (.el5) You can open files created with Easy-PhotoPrint EX with the following methods, besides from Library in Menu. - Click Open in the step button area of each screen, then select the file you want to edit. - Double-click the file.
Printimine muu rakendustarkvaraga Lehekülg 240 / 707 Põhjalik juhend > Arvutist printimine > Printimine muu rakendustarkvaraga Printimine muu rakendustarkvaraga Erinevad printimisviisid Prindikvaliteedi muutmine ja pildiandmete korrigeerimine Ülevaade printeridraiverist Lehekülje algusesse
Various Printing Methods Lehekülg 241 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods Various Printing Methods Printing with Easy Setup Setting a Page Size and Orientation Setting the Number of Copies and Printing Order Setting the Stapling Margin Execute Borderless Printing Fit-to-Page Printing Scaled Printing Page Layout Printing Poster Printing Booklet Printing Duplex Printing Stamp/Background Printing Registering a Stamp Regist
Printing with Easy Setup Lehekülg 242 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Printing with Easy Setup P000 Printing with Easy Setup The simple setup procedure for carrying out appropriate printing on this machine, is as follows: 1. Open the printer driver setup window 2. Select a frequently used profile In Commonly Used Settings on the Quick Setup tab, select a printing profile suited for the purpose.
Setting a Page Size and Orientation Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Setting a Page Size and Orientation P400 Setting a Page Size and Orientation The paper size and orientation are essentially determined by the application. When the page size and orientation set for Page Size and Orientation on the Page Setup tab are same as those set with the application, you do not need to select them on the Page Setup tab.
Setting a Page Size and Orientation Lehekülg 244 / 707 Page top
Setting the Number of Copies and Printing Order Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Setting the Number of Copies and Printing Order P001 Setting the Number of Copies and Printing Order The procedure for specifying the number of copies and printing order is as follows: You can also set the number of copies on the Quick Setup tab. 1. Open the printer driver setup window 2.
Setting the Number of Copies and Printing Order Print from Last Page: /Collate: Print from Last Page: /Collate: Lehekülg 246 / 707 4. Complete the setup Click OK. When you execute print, the specified number of copies will be printed with the specified printing order. Important When the application software that you used to create the document has the same function, give priority to the printer driver settings.
Setting the Stapling Margin Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Setting the Stapling Margin P002 Setting the Stapling Margin The procedure for setting the staple side and the margin width is as follows: 1. Open the printer driver setup window 2. Specify the side to be stapled Check the position of the stapling margin from Staple Side on the Page Setup tab.
Setting the Stapling Margin Lehekülg 248 / 707 Note The printer automatically reduces the print area depending on the staple position margin. 4. Complete the setup Click OK on the Page Setup tab. When you execute print, the data is printed with the specified staple side and margin width. Important Staple Side and Specify Margin... appear grayed out and are unavailable when: Borderless, Poster, or Booklet is selected for Page Layout.
Execute Borderless Printing Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Execute Borderless Printing P003 Execute Borderless Printing The borderless printing function allows you to print data without any margin by enlarging the data so that it extends slightly off the paper. Without the borderless printing function, a margin is provided around the printed data.
Execute Borderless Printing 3. Check the paper size Check the Page Size list. When you want to change, select another page size from the list. The list displays only sizes that can be used for borderless printing. 4. Adjust the amount of extension from the paper If necessary, adjust the amount of extension using the Amount of Extension slider. Moving the slider to the right increases the amount extending off the paper, and moving the slider to the left decreases the amount.
Execute Borderless Printing Lehekülg 251 / 707 border before printing.
Fit-to-Page Printing Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Fitto-Page Printing P004 Fit-to-Page Printing The procedure for printing a document that is automatically enlarged or reduced to fit the page size to be used is as follows: 1. Open the printer driver setup window 2. Set fit-to-page printing Select Fit-to-Page from the Page Layout list on the Page Setup tab. 3.
Fit-to-Page Printing Lehekülg 253 / 707 The current settings are displayed in the settings preview on the left side of the printer driver. 5. Complete the setup Click OK. When you execute print, the document will be enlarged or reduced to fit to the page size.
Scaled Printing Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Scaled Printing P005 Scaled Printing The procedure for printing a document with pages enlarged or reduced is as follows: 1. Open the printer driver setup window 2. Set scaled printing Select Scaled from the Page Layout list on the Page Setup tab. 3. Select the paper size for the data Using Page Size, select the page size that is set with your application. 4.
Scaled Printing Specify a scaling factor Directly type in a value into the Scaling box. The current settings are displayed in the settings preview on the left side of the printer driver. 5. Complete the setup Click OK. When you execute print, the document will be printed with the specified scale. Important When the application software which you created the original has the scaled printing function, configure the settings on your application software.
Scaled Printing Lehekülg 256 / 707 Selecting Scaled changes the printable area of the document.
Page Layout Printing Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Page Layout Printing P006 Page Layout Printing The page layout printing function allows you to print more than one page image on a single sheet of paper. The procedure for performing page layout printing is as follows: 1. Open the printer driver setup window 2. Set page layout printing Select Page Layout from the Page Layout list on the Page Setup tab.
Page Layout Printing Lehekülg 258 / 707 Pages To change the number of pages to be printed on a single sheet of paper, select the number of pages from the list. You can also set 2-Page Print or 4-Page Print on the Quick Setup tab. Page Order To change the page arrangement order, select an icon from the list to change the page placement order. Page Border To print a page border around each document page, check this check box. 5. Complete the setup Click OK on the Page Setup tab.
Poster Printing Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Poster Printing P401 Poster Printing The poster printing function allows you to enlarge image data, divide it into several pages, and print these pages on separate sheets of paper. When the pages are pasted together, they form a large print like a poster. The procedure for performing poster printing is as follows: Setting Poster Printing 1.
Poster Printing 4. Set the number of image divisions and the pages to be printed If necessary, click Specify..., specify the following settings in the Poster Printing dialog box, and then click OK. Image Divisions Select the number of divisions (vertical x horizontal). As the number of divisions increases, the number of sheets used for printing increases, allowing you to create a larger poster. Print "Cut/Paste" in margins To leave out words "Cut" and "Paste", uncheck this check box.
Poster Printing Lehekülg 261 / 707 Note Click the deleted pages to display them again. Right-click the settings preview to select Print all pages or Delete all pages. 2. Complete the setup After completing the page selection, click OK. When you execute print, only specified pages will be printed. Important When Poster is selected, the Duplex Printing, Staple Side and Print from Last Page appear grayed out and are unavailable.
Booklet Printing Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Booklet Printing P402 Booklet Printing The booklet printing function allows you to print data for a booklet. Data is printed on both sides of the paper. This type of printing ensures that pages can be collated properly, in page number order, when the printed sheets are folded and stapled at the center. The procedure for performing booklet printing is as follows: 1.
Booklet Printing Lehekülg 263 / 707 Margin for stapling Select which side should the stapling margin be on when the booklet is completed. Insert blank page To leave one side of a sheet blank, check the check box, and select the page to be left blank. Margin Enter the margin width. The specified width from the center of the sheet becomes the margin width for one page. Page Border To print a page border around each document page, check the check box. 5. Complete the setup Click OK on the Page Setup tab.
Duplex Printing Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Duplex Printing P007 Duplex Printing The procedure for printing data on both sides of a sheet of paper is as follows: You can also set duplex printing in Additional Features on the Quick Setup tab. 1. Open the printer driver setup window 2. Set duplex printing Check the Duplex Printing check box on the Page Setup tab. 3.
Duplex Printing Lehekülg 265 / 707 6. Complete the setup Click OK on the Page Setup tab. When you execute print, the document is first printed on one side of a sheet of paper. After one side is printed, reload the paper correctly according to the message. Then click OK to print the opposite side. Important When a media type other than Plain Paper is selected from Media Type, Duplex Printing appears grayed out and is unavailable.
Stamp/Background Printing Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Stamp/Background Printing P403 Stamp/Background Printing Stamp or Background may be unavailable when certain printer drivers are used. The Stamp function allows you to print a stamp text or a bitmap over or behind document data. It also allows you to print date, time and user name.
Stamp/Background Printing With the XPS printer driver, the Stamp/Background... button has become the Stamp... button and only the stamp function can be used. 3. Select a stamp Check the Stamp check box, and select the stamp to be used from the list. The current settings are displayed in the settings preview on the left side of the Page Setup tab. 4. Set the stamp details If necessary, specify the following settings, and then click OK. Define Stamp...
Stamp/Background Printing Lehekülg 268 / 707 5. Complete the setup Click OK on the Page Setup tab. When you execute print, the data is printed with the specified background. Important When Borderless is selected, the Stamp/Background... (Stamp...) button appears grayed out and is unavailable. Note The stamp and background are not printed on blank sheets inserted with the Insert blank page function of booklet printing.
Registering a Stamp Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Stamp/Background Printing > Registering a Stamp P404 Registering a Stamp This feature may be unavailable when certain printer drivers are used. You can create and register a new stamp. You can also change and register some of the settings of an existing stamp. Unnecessary stamps can be deleted at any time.
Registering a Stamp 3. Click Define Stamp... The Stamp Settings dialog box opens. 4. Configure the stamp while viewing the preview window Stamp tab Select Text, Bitmap, or Date/Time/User Name that matches your purpose for Stamp Type. For Text registration, the characters must already be entered in Stamp Text. If necessary, change the TrueType Font, Style, Size, and Outline settings. You can select the color of the stamp by clicking Select Color.... For Bitmap, click Select File...
Registering a Stamp Lehekülg 271 / 707 Check the Stamp check box in the Stamp/Background (Stamp) dialog box, and then select the title of the stamp to be changed from the Stamp list. 2. Click Define Stamp... The Stamp Settings dialog box opens. 3. Configure the stamp while viewing the preview window 4. Overwrite save the stamp Click Save overwrite on the Save settings tab. When you want to save the stamp with a different title, type a new title in the Title box and click Save.
Registering Image Data to be Used as a Background Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Stamp/Background Printing > Registering Image Data to be Used as a Background P405 Registering Image Data to be Used as a Background This feature may be unavailable when certain printer drivers are used. You can select a bitmap file (.bmp) and register it as a new background.
Registering Image Data to be Used as a Background and Background cannot be used. 3. Click Select Background... The Background Settings dialog box opens. 4. Select the image data to be registered to the background Click Select File.... Select the target bitmap file (.bmp), and then click Open. 5. Specify the following settings while viewing the preview window Layout Method Select how the background image data is to be placed. When Custom is selected, you can set coordinates for X-Position and Y-Position.
Registering Image Data to be Used as a Background Lehekülg 274 / 707 4. Save the background Click Save overwrite on the Save settings tab. When you want to save the background with a different title, enter a new title in the Title box and click Save. Click OK when the confirmation message appears. 5. Complete the setup Click OK. The Stamp/Background dialog box opens again. The registered title appears in the Background list. Deleting an Unnecessary Background 1. Click Select Background...
Printing an Envelope Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Printing an Envelope P406 Printing an Envelope If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. For details on how to load an envelope into the machine, refer to "Loading Paper" in the manual: Basic Guide. The procedure for performing envelope printing is as follows: 1.
Printing an Envelope Lehekülg 276 / 707 5. Select the paper size When the Envelope Size Setting dialog box is displayed, select Comm.Env. #10, DL Env., Youkei 4 105x235mm, or Youkei 6 98x190mm, and then click OK. 6. Set the orientation To print the addressee horizontally, select Landscape for Orientation. 7. Select the print quality Select High or Standard that matches your purpose for Print Quality. 8. Complete the setup Click OK. When you execute print, the information is printed on the envelope.
Displaying the Print Results before Printing Lehekülg 277 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Displaying the Print Results before Printing P009 Displaying the Print Results before Printing If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. You can display and check the print result before printing.
Setting Paper Dimensions (Custom Size) Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Setting Paper Dimensions (Custom Size) P010 Setting Paper Dimensions (Custom Size) You can specify the height and width of paper when its size cannot be selected from the Page Size. Such a paper size is called "custom size.
Setting Paper Dimensions (Custom Size) Lehekülg 279 / 707 4. Set the custom paper size Specify Units, and enter the Width and Height of the paper to be used. Then click OK. 5. Complete the setup Click OK on the Page Setup tab. When you execute print, the data is printed with the specified paper size.
Changing the Print Quality and Correcting Image Data Lehekülg 280 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data Changing the Print Quality and Correcting Image Data Selecting a Combination of the Print Quality Level and a Halftoning Method Printing a Color Document in Monochrome Specifying Color Correction Optimal Photo Printing of Image Data Adjusting Colors with the Printer Driver Printing with ICC Profi
Selecting a Combination of the Print Quality Level and a Halftoning Method Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Selecting a Combination of the Print Quality Level and a Halftoning Method P011 Selecting a Combination of the Print Quality Level and a Halftoning Method You can individually set the combined representation method for the print quality level and the halftoning method.
Selecting a Combination of the Print Quality Level and a Halftoning Method Lehekülg 282 / 707 3. Setting the print quality and halftone expression method Move the Quality slider to select the quality level. Select the expression method in Halftoning and click OK. Note Halftones refer to color shades between the darkest color and the brightest color. The printer replaces the color shades with a collection of small dots to express the halftones.
Printing a Color Document in Monochrome Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Printing a Color Document in Monochrome P012 Printing a Color Document in Monochrome The procedure for printing a color document in monochrome is as follows: You can also set a grayscale printing in Additional Features on the Quick Setup tab. 1. Open the printer driver setup window 2.
Printing a Color Document in Monochrome Lehekülg 284 / 707 Note During Grayscale Printing, color inks may be used as well as black ink.
Specifying Color Correction Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Specifying Color Correction P013 Specifying Color Correction You can specify the color correction method suited to the type of document to be printed. Normally, the printer driver adjusts the colors by using Canon Digital Photo Color so that data is printed with color tints that most people prefer.
Specifying Color Correction Lehekülg 286 / 707 Driver Matching By using Canon Digital Photo Color, you can print sRGB data with color tints that most people prefer. Driver Matching is the default setting for color correction. ICM/ICC Profile Matching Adjusts the colors by using an ICC profile when printing. Specify the input profile to be used. None The printer driver does not perform color correction.
Optimal Photo Printing of Image Data Lehekülg 287 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Specifying Color Correction > Optimal Photo Printing of Image Data P014 Optimal Photo Printing of Image Data When people print images taken with digital cameras, they sometimes feel that the printed color tones differ from those of actual image or those displayed on the monitor.
Adjusting Colors with the Printer Driver Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Specifying Color Correction > Adjusting Colors with the Printer Driver P015 Adjusting Colors with the Printer Driver You can specify the color correction function of the printer driver to print sRGB data with color tints that most people prefer through the use of Canon Digital Photo Color.
Adjusting Colors with the Printer Driver Lehekülg 289 / 707 6. Set the other items If necessary, click Color Adjustment tab, and adjust the color balance (Cyan, Magenta, Yellow) and adjust Brightness, Intensity, and Contrast settings, and then click OK. 7. Complete the setup Click OK on the Main tab. When you execute print, the printer driver adjusts the colors when printing the data.
Printing with ICC Profiles Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Specifying Color Correction > Printing with ICC Profiles P016 Printing with ICC Profiles When the image data has a specified input ICC profile, you can print by using the color space (Adobe RGB or sRGB) of the data effectively. The printer driver setting procedure varies depending on the application software used to print.
Printing with ICC Profiles 5. Select color correction Click Matching tab, and select None for Color Correction. 6. Set the other items If necessary, click Color Adjustment tab, and adjust the color balance (Cyan, Magenta, Yellow) and adjust Brightness, Intensity, and Contrast settings, and then click OK. 7. Complete the setup Click OK on the Main tab. When you execute print, the printer uses the color space of the image data.
Printing with ICC Profiles 3. Select the print quality For Print Quality, select High, Standard, or Fast according to your purpose. 4. Select the manual color adjustment Select Manual for Color/Intensity, and click Set.... Manual Color Adjustment dialog box opens. 5. Select color correction Click Matching tab, and select ICM or ICC Profile Matching for Color Correction. 6. Select the input profile Select an Input Profile that matches the color space of the image data.
Printing with ICC Profiles Lehekülg 293 / 707 Select Adobe RGB (1998). Important When the application software specifies an input profile, the input profile setting of the printer driver becomes invalid. When no input ICC profiles are installed on your computer, Adobe RGB (1998) will not be displayed. You can install ICC profiles from the Setup CD-ROM that accompanies the machine. 7.
Adjusting Color Balance Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Adjusting Color Balance P017 Adjusting Color Balance You can adjust the color tints when printing. Since this function adjusts color balance of the output by changing the ink ratios of each color, it changes the total color balance of the document. Use the application software when you want to change the color balance significantly.
Adjusting Color Balance Lehekülg 295 / 707 3. Adjust color balance There are individual sliders for Cyan, Magenta, and Yellow. Each color becomes stronger when the corresponding slider is moved to the right, and becomes weaker when the corresponding slider is moved to the left. For example, when cyan becomes weaker, the color red becomes stronger. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Adjusting Brightness Lehekülg 296 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Adjusting Brightness P018 Adjusting Brightness You can change the brightness of the overall image data during printing. This function does not change pure white or pure black but it changes the brightness of the intermediate colors. The following sample shows the print result when the brightness setting is changed.
Adjusting Brightness Lehekülg 297 / 707 4. Complete the setup Click OK on the Main tab. When you execute print, the data is printed at the specified brightness.
Adjusting Intensity Lehekülg 298 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Adjusting Intensity P019 Adjusting Intensity You can dilute (brighten) or intensify (darken) the colors of the overall image data during printing. The following sample shows the case when the intensity is increased so that all colors become more intense when the image data is printed.
Adjusting Intensity Lehekülg 299 / 707 Important Adjust the slider gradually. 4. Complete the setup Click OK on the Main tab. When you execute print, the image data is printed with the adjusted intensity.
Adjusting Contrast Lehekülg 300 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Adjusting Contrast P020 Adjusting Contrast You can adjust the image contrast during printing. To make the differences between the light and dark portions of images greater and more distinct, increase the contrast.
Adjusting Contrast Lehekülg 301 / 707 After adjusting each color, click OK. Important Adjust the slider gradually. 4. Complete the setup Click OK on the Main tab. When you execute print, the image is printed with the adjusted contrast.
Simulating an Illustration Lehekülg 302 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Simulating an Illustration P021 Simulating an Illustration This feature is unavailable when the XPS printer driver is used. With the Simulate Illustration function, you can print full-color or 256-color image data so that it looks like a hand-drawn illustration.
Representing Image Data with a Single Color Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Representing Image Data with a Single Color P022 Representing Image Data with a Single Color This feature is unavailable when the XPS printer driver is used. With the Monochrome Effects function, you can benefit from coloring effects such as changing a photograph to a sepia tone image.
Representing Image Data with a Single Color Lehekülg 304 / 707 Important When the Grayscale Printing check box on the Main tab is checked, Monochrome Effects appears grayed out and is unavailable.
Presenting Image Data with Vivid Colors Lehekülg 305 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Presenting Image Data with Vivid Colors P023 Presenting Image Data with Vivid Colors This feature is unavailable when the XPS printer driver is used. The Vivid Photo function allows you to print image data with vivid colors.
Smoothing Jagged Outlines Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Smoothing Jagged Outlines P407 Smoothing Jagged Outlines This feature is unavailable when the XPS printer driver is used. The Image Optimizer function reduces the jagged outlines that are produced when photos and graphics are enlarged with your application. It allows you to print smooth outlines.
Smoothing Jagged Outlines Lehekülg 307 / 707 It may take longer to complete printing when the image optimizer is used.
Changing Color Properties to Improve Coloration Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Changing Color Properties to Improve Coloration P408 Changing Color Properties to Improve Coloration This feature is unavailable when the XPS printer driver is used. The Photo Optimizer PRO function corrects colors of digital camera images or scanned images.
Changing Color Properties to Improve Coloration Lehekülg 309 / 707 Click OK. When you execute print, the printer corrects the photo coloring and prints out the photos. Important Photo Optimizer PRO does not function when: Background is set in the Stamp/Background dialog box on the Page Setup tab. Define Stamp... is selected in the Stamp/Background dialog box on the Page Setup tab, and the bitmapped stamp is configured. Note Depending on images, the Photo Optimizer PRO may have no discernible effect.
Reducing Photo Noise Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Reducing Photo Noise P024 Reducing Photo Noise This feature is unavailable when the XPS printer driver is used. With the Photo Noise Reduction function, you can reduce the digital camera noise and improve the image quality of the digital print. The procedure for performing Photo Noise Reduction is as follows: 1.
Reducing Photo Noise Lehekülg 311 / 707 Note It is recommended to select Normal for most cases. Select Strong if you have selected Normal and the noise still bothers you. Depending on application software or resolution of image data, effects of digital camera noise reduction may not be obvious. When this function is used for other than photos taken by digital cameras, image may be distorted.
Overview of the Printer Driver Lehekülg 312 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver Overview of the Printer Driver Printer Driver Operations Canon IJ Printer Driver XPS Printer Driver How to Open the Printer Driver Setup Window Maintenance Tab Canon IJ Status Monitor Canon IJ Preview Page top
Printer Driver Operations Lehekülg 313 / 707 MA-6355-V1.
Canon IJ Printer Driver Lehekülg 314 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Printer Driver P025 Canon IJ Printer Driver The Canon IJ printer driver is software that is installed on your computer for printing data on this machine. The Canon IJ printer driver converts the print data created by your Windows application into data that your printer can understand, and sends the converted data to the printer.
XPS Printer Driver Lehekülg 315 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Printer Driver > XPS Printer Driver P416 XPS Printer Driver The following two printer drivers can be installed on Windows Vista SP1 or later: IJ printer driver XPS printer driver The XPS printer driver is suited to print from an application that supports XPS printing.
How to Open the Printer Driver Setup Window Lehekülg 316 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Printer Driver > How to Open the Printer Driver Setup Window P409 How to Open the Printer Driver Setup Window The printer driver setup window can be displayed through the application software in use or the Start menu of the Windows.
Maintenance Tab Lehekülg 317 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Printer Driver > Maintenance Tab P410 Maintenance Tab The Maintenance tab allows you to perform machine maintenance or change the settings of the machine.
Canon IJ Status Monitor Lehekülg 318 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Status Monitor P411 Canon IJ Status Monitor If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. The Canon IJ Status Monitor is an application software that shows the status of the printer and the progress of printing on the Windows screen.
Canon IJ Preview Lehekülg 319 / 707 Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Preview P412 Canon IJ Preview The Canon IJ Preview is an application software that displays what the print result will look like before a document is actually printed. The preview reflects the information that is set within the printer driver and allows you to check the document layout, print order, and number of pages.
Printimine seadme juhtpaneeli kasutades Lehekülg 320 / 707 Põhjalik juhend > Printimine seadme juhtpaneeli kasutades Printimine seadme juhtpaneeli kasutades Kopeerimine Lehekülje algusesse
Kopeerimine Lehekülg 321 / 707 Põhjalik juhend > Printimine seadme juhtpaneeli kasutades > Kopeerimine Kopeerimine Koopiate tegemine Koopia vähendamine või suurendamine Kasulike kopeerimisfunktsioonide kasutamine Lehekülje algusesse
Koopiate tegemine Lehekülg 322 / 707 Põhjalik juhend > Printimine seadme juhtpaneeli kasutades > Kopeerimine > Koopiate tegemine U031 Koopiate tegemine Koopiate tegemise põhitoiminguid vt Kopeerimine.
Koopia vähendamine või suurendamine Lehekülg 323 / 707 Põhjalik juhend > Printimine seadme juhtpaneeli kasutades > Kopeerimine > Koopia vähendamine või suurendamine U033 Koopia vähendamine või suurendamine Lehele sobitamisega kopeerimise funktsioon võimaldab originaali kopeerida nii, et seda suurendatakse või vähendatakse vastavalt valitud lehe vormingule automaatselt.
Koopia vähendamine või suurendamine Lehekülg 324 / 707 Nupu Stopp/Tühistus (Stop/Reset) vajutamine viib koopiate arvu tagasi 1 peale. 7. Vajutage värvikoopia tegemiseks nuppu Värvirežiim (Color) ja mustvalge koopia tegemiseks nuppu Must režiim (Black) . Seade alustab koopiate tegemist vastavalt lehe formaadile. Kui kopeerimine on lõppenud, eemaldage kopeerimisalusel olev originaal. 10 kuni 19 koopia tegemine Kui kõik seadmesse asetatud paberilehed otsa saavad, ilmneb paberi otsasaamise viga.
Kasulike kopeerimisfunktsioonide kasutamine Lehekülg 325 / 707 Põhjalik juhend > Printimine seadme juhtpaneeli kasutades > Kopeerimine > Kasulike kopeerimisfunktsioonide kasutamine U036 Kasulike kopeerimisfunktsioonide kasutamine Paberi suuruse vahetamine A4- ja Letter-formaadi vahel Tagasalve laaditava paberi formaadiks saate valida A4 või Letter. Paberi suuruse vahetamine A4- ja Letter-formaadi vahel Ääristeta kopeerimine Pilte saab kopeerida nii, et kujutis täidab kogu lehekülje servast servani.
Paberi suuruse vahetamine A4- ja Letter-formaadi vahel Lehekülg 326 / 707 Põhjalik juhend > Printimine seadme juhtpaneeli kasutades > Kopeerimine > Kasulike kopeerimisfunktsioonide kasutamine > Paberi suuruse vahetamine A4- ja Letter-formaadi vahel U097 Paberi suuruse vahetamine A4- ja Letter-formaadi vahel Tagasalve laaditava paberi formaadiks saate valida A4 või Letter.
Ääristeta kopeerimine (Ääristeta koopia) Põhjalik juhend > Printimine seadme juhtpaneeli kasutades > Kopeerimine > Kasulike kopeerimisfunktsioonide kasutamine > Ääristeta kopeerimine (Ääristeta koopia) U039 Ääristeta kopeerimine (Ääristeta koopia) Pilte saab fotopaberile kopeerida nii, et kujutis täidab kogu lehekülje servast servani. 1. Veenduge, et seade on sisse lülitatud. 2. Asetage fotopaber tagasalve. 3. Lehe formaadi valimiseks vajutage nuppu Paber (Paper) .
Ääristeta kopeerimine (Ääristeta koopia) Lehekülg 328 / 707 Nupu Stopp/Tühistus (Stop/Reset) vajutamine viib koopiate arvu tagasi 1 peale. 6. Vajutage värvikoopia tegemiseks nuppu Värvirežiim (Color) ja mustvalge koopia tegemiseks nuppu Must režiim (Black) . Seade alustab ääristeta koopiate tegemist. Kui kopeerimine on lõppenud, eemaldage kopeerimisalusel olev originaal. 10 kuni 19 koopia tegemine Kui kõik seadmesse asetatud paberilehed otsa saavad, ilmneb paberi otsasaamise viga.
Skannimine Lehekülg 329 / 707 Põhjalik juhend > Skannimine Skannimine Piltide skannimine Skannimine seadme juhtpaneeli kasutades Kaasasoleva rakendustarkvaraga skannimine Muu rakendustarkvaraga skannimine Muud skannimismeetodid Lehekülje algusesse
Piltide skannimine Lehekülg 330 / 707 Põhjalik juhend > Skannimine > Piltide skannimine Piltide skannimine Piltide skannimine Enne skannimist Dokumentide alusele asetamine Lehekülje algusesse
Piltide skannimine Lehekülg 331 / 707 Põhjalik juhend > Skannimine > Piltide skannimine > Piltide skannimine U046 Piltide skannimine Saate skannida pilte seadmest ja hõlpsasti need arvutisse salvestada. Lisaks saate pilte arvutist skannida täpsemate sätetega, kasutades rakenduse tarkvara. Valige skannimismeetod vastavalt oma vajadustele.
Enne skannimist Lehekülg 332 / 707 Põhjalik juhend > Skannimine > Piltide skannimine > Enne skannimist U047 Enne skannimist Kontrollige, et skannitav originaal vastab klaasalusele asetatava originaali nõuetele. Vt nõudeid ja kopeerimisalusele originaali asetamise viisi jaotisest Dokumentide alusele asetamine .
Placing Documents Lehekülg 333 / 707 Advanced Guide > Scanning > Scanning Images > Placing Documents S005 Placing Documents Learn how to place documents on the machine's Platen. Place documents correctly according to the type of document to be scanned. Otherwise, documents may not be scanned correctly. Important Do not place objects on the Document Cover. The objects may fall into the machine when the Document Cover is opened. This may damage the machine. Close the Document Cover when scanning.
Placing Documents that cannot be placed away from the edges/ arrow (alignment mark) of the Platen may be saved as PDF files. To save in a format other than PDF, scan by specifying the file format. Placing Multiple Documents Lehekülg 334 / 707 scanned. 0.039 inches (1 mm) Allow 0.39 inches (1 cm) or more space between the edges (diagonally striped area) of the Platen and documents, and between documents. Portions placed on the diagonally striped area cannot be scanned. more than 0.
Skannimine seadme juhtpaneeli kasutades Lehekülg 335 / 707 Põhjalik juhend > Skannimine > Skannimine seadme juhtpaneeli kasutades Skannimine seadme juhtpaneeli kasutades Skannitud andmete edastamine arvutisse seadme juhtpaneeli kasutades Lisa: mitmesugused skannimissätted Lehekülje algusesse
Skannitud andmete edastamine arvutisse seadme juhtpaneeli kasutades Põhjalik juhend > Skannimine > Skannimine seadme juhtpaneeli kasutades > Skannitud andmete edastamine arvutisse seadme juhtpaneeli kasutades U051 Skannitud andmete edastamine arvutisse seadme juhtpaneeli kasutades Saate skannitud andmeid arvutisse edastada seadme juhtpaneeli abil. Seade tuvastab automaatselt klaasalusele asetatud originaali tüübi ja kujutis edastatakse optimaalse suuruse ja eraldusvõimega.
Skannitud andmete edastamine arvutisse seadme juhtpaneeli kasutades Kui skannimine on lõppenud, eemaldage originaal kopeerimisaluselt. 4. MP Navigator EX 4.0 määramine Kui kasutate Windows 7-t või Windows Vistat. Pärast nupu Skanni (SCAN) vajutamist võidakse kuvada programmi valikuekraan. Sellisel juhul valige MP Navigator EX Ver4.0 ja klõpsake OK. Saate seadistada MP Navigator EX-i käivituma iga kord nupu Skanni (SCAN) vajutamisel. Täpsemat teavet leiate jaotisest Windowsi kasutajatele .
Appendix: Various Scan Settings Lehekülg 338 / 707 Advanced Guide > Scanning > Scanning with Using the Operation Panel of the Machine > Appendix: Various Scan Settings S010 Appendix: Various Scan Settings Specifying how to respond when scanning using the Operation Panel of the machine Selecting a Response to Commands from the Operation Panel Using MP Navigator EX Page top
Selecting a Response to Commands from the Operation Panel Using MP Navigato... Advanced Guide > Scanning > Scanning with Using the Operation Panel of the Machine > Appendix: Various Scan Settings > Selecting a Response to Commands from the Operation Panel Using MP Navigator EX S007 Selecting a Response to Commands from the Operation Panel Using MP Navigator EX MP Navigator EX enables you to specify how to respond when scanning using the Operation Panel of the machine. 1. Start MP Navigator EX.
Selecting a Response to Commands from the Operation Panel Using MP Navigato... Note See the section below for details. Scanner Button Settings Tab (Save to PC) 4. Click OK. The operation will be performed according to the settings when you start scanning using the Operation Panel of the machine.
Kaasasoleva rakendustarkvaraga skannimine Lehekülg 341 / 707 Põhjalik juhend > Skannimine > Kaasasoleva rakendustarkvaraga skannimine Kaasasoleva rakendustarkvaraga skannimine Mis on MP Navigator EX (kaasasolev skanneritarkvara)? Proovige skannida Kasulikud MP Navigator EX-i funktsioonid Piltide MP Navigator EX-is kasutamine Tarkvara MP Navigator EX kuvad Lisa: muude kui skannitud piltide avamine Lehekülje algusesse
What Is MP Navigator EX (Supplied Scanner Software)? Advanced Guide > Scanning > Scanning with the Bundled Application Software > What Is MP Navigator EX (Supplied Scanner Software)? S101 What Is MP Navigator EX (Supplied Scanner Software)? MP Navigator EX is an application that enables you to easily scan photos and documents. It is suitable even for beginners. Important MP Navigator EX may not start from the Operation Panel of the machine. In that case, restart the computer.
What Is MP Navigator EX (Supplied Scanner Software)? Lehekülg 343 / 707 Scan/Import Window Use the Scan/Import window to scan photos and documents. View & Use Window Use the View & Use window to select what you want to do with the scanned images. Note See "File Formats " for data formats (extensions) supported by MP Navigator EX.
Let's Try Scanning Lehekülg 344 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning S100 Let's Try Scanning Try scanning using MP Navigator EX. Starting MP Navigator EX Starting MP Navigator EX Scanning with a simple operation Easy Scanning with Auto Scan Scanning documents, photos, magazines, etc.
Starting MP Navigator EX Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Starting MP Navigator EX S111 Starting MP Navigator EX Starting MP Navigator EX 1. From the Start menu, select All Programs > Canon Utilities > MP Navigator EX 4.0 > MP Navigator EX 4.0. MP Navigator EX starts. Starting One-click Mode 1. Click (Switch Mode) at the bottom left of the screen. The One-click Mode screen appears.
Starting MP Navigator EX Lehekülg 346 / 707 Note Select the Show this window at startup checkbox in the Navigation Mode screen to always open the Navigation Mode screen at startup. If this checkbox is not selected, the last used screen appears at startup.
Easy Scanning with Auto Scan Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Easy Scanning with Auto Scan S108 Easy Scanning with Auto Scan Scan documents easily by automatically detecting the document type. Important Supported document types are photos, postcards, business cards, magazines, newspapers, text documents and BD/DVD/CD. To scan other documents, specify the document type. Scanning Photos and Documents 1. Place the document on the Platen.
Easy Scanning with Auto Scan A message about placing documents appears. Click Open Manual to open this guide (if it is installed). Click OK to start scanning. Note Click Cancel to cancel the scan. When scanning is completed, the Scan Complete dialog box opens. Select Scan or Exit. Select Scan to scan the next document, or select Exit to end. The scanned images appear in the Thumbnail window. 6. Edit the scanned images as required. Use Edit Tools to rotate images, select a part of an image, etc.
Easy Scanning with Auto Scan Lehekülg 349 / 707 7. Save the scanned images.
Scanning Photos and Documents Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Scanning Photos and Documents S102 Scanning Photos and Documents Scan photos and documents placed on the Platen. 1. Place the document on the Platen. Placing Documents 2. Start MP Navigator EX and open the Navigation Mode screen. Starting MP Navigator EX 3. In Scan/Import, click Photos/Documents (Platen). 4. Select Document Type according to the document to be scanned.
Scanning Photos and Documents Note When you select Magazine(Color), the descreen function will be enabled and scanning takes longer than usual. To disable the descreen function, deselect the Descreen checkbox in the Scan Settings dialog box. Select Text(OCR) to extract the text in the image and convert to editable text data using MP Navigator EX. Color scanning is not available for Text(OCR). To scan in color, open the OCR dialog box from the One-click Mode screen and scan with Color Mode set to Color. 5.
Scanning Photos and Documents Lehekülg 352 / 707 7. Edit the scanned images as required. Use Edit Tools to rotate images, select a part of an image, etc. See the Edit Tools in "Photos/Documents (Platen) Screen (Scan/Import Window) " for details. Note First select images to edit. (Selected images are outlined in orange.) Drag the mouse or use Shift + arrow keys to select multiple images. You can also select images by dragging and dropping them into the Selected Images area. 8. Save the scanned images.
Scanning Multiple Documents at One Time Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Scanning Multiple Documents at One Time S105 Scanning Multiple Documents at One Time You can scan two or more photos (small documents) at one time by setting Document Size to Auto Detect (Multiple Documents) in the Scan Settings dialog box of MP Navigator EX. Important The following types of documents may not be cropped correctly.
Scanning Multiple Documents at One Time 5. Click Specify.... Select Auto Detect (Multiple Documents) for Document Size. When setting is completed, click OK. Scan Settings Dialog Box (Photos/Documents) 6. Click Scan.
Scanning Multiple Documents at One Time Multiple documents are scanned at one time. Note Click Cancel to cancel the scan. When scanning is completed, the Scan Complete dialog box opens. Select Scan or Exit. Select Scan to scan the next document, or select Exit to end. The scanned images appear in the Thumbnail window. 7. Edit the scanned images as required. Use Edit Tools to rotate images, select a part of an image, etc.
Scanning Multiple Documents at One Time Lehekülg 356 / 707 Saving as PDF Files Note If you want to preview the images before scanning, use ScanGear.
Scanning Images Larger than the Platen (Stitch Assist) Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Scanning Images Larger than the Platen (Stitch Assist) S106 Scanning Images Larger than the Platen (Stitch Assist) Stitch Assist allows you to scan the left and right halves of a large document separately and combine the scanned images back into one image. You can scan documents that are up to twice as large as the Platen. 1.
Scanning Images Larger than the Platen (Stitch Assist) 4. Click Specify.... Select Stitch Assist for Document Size, then specify the scanning resolution as required. When setting is completed, click OK. Scan Settings Dialog Box (Photos/Documents) 5. Click Scan.
Scanning Images Larger than the Platen (Stitch Assist) The Stitch-assist window opens. 6. Place the left half of the document face-down on the Platen. 7. Click Scan. The left half of the document is scanned and appears in the Stitch-assist window. Note Click Cancel to cancel the scan.
Scanning Images Larger than the Platen (Stitch Assist) 8. Place the right half of the document face-down on the Platen. 9. Click Scan. The right half of the document is scanned. Note Click Cancel to cancel the scan. 10. Adjust the scanned image as required. Use the icons to swap the left and right halves, rotate the image 180 degrees or enlarge/reduce the image. (Swap Left & Right) Swaps the left and right halves. Important This function is not available while the image is enlarged/reduced.
Scanning Images Larger than the Platen (Stitch Assist) Important This function is not available while the image is enlarged/reduced. (Enlarge) Enlarges the displayed image. (Reduce) Reduces the displayed image. (Full-screen) Displays the entire image. Note Enlarge/Reduce does not affect the actual size of the scanned image. When the document is scanned upside down, the image displayed in the Stitch-assist window will also be upside down. Click Rotate 180° to rotate the image to the correct orientation.
Scanning Images Larger than the Platen (Stitch Assist) Lehekülg 362 / 707 13. Save the scanned images.
Easy Scanning with One-click Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Easy Scanning with One-click S104 Easy Scanning with One-click You can complete "from scanning to saving", etc. at one time by simply clicking the corresponding icon. 1. Place the document on the Platen. Placing Documents 2. Start MP Navigator EX. Starting MP Navigator EX The MP Navigator EX Navigation Mode screen or One-click Mode screen appears.
Easy Scanning with One-click Lehekülg 364 / 707 4. Click the corresponding icon. Custom Scan with One-click Tab One-click Mode Screen 5. Select Document Type according to the document to be scanned. 6. Set the document size and scanning resolution as required. 7. Start scanning. Starts scanning. Note Click Cancel to cancel the scan.
Useful MP Navigator EX Functions Lehekülg 365 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions S400 Useful MP Navigator EX Functions With MP Navigator EX, you can correct/enhance scanned images beautifully, and search saved images quickly.
Correcting/Enhancing Images Automatically Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions > Correcting/Enhancing Images Automatically S401 Correcting/Enhancing Images Automatically MP Navigator EX will analyze and correct/enhance scanned images automatically. 1. Scan documents into MP Navigator EX and save them, then open the View & Use window from the Navigation Mode screen and select the photos you want to correct/ enhance.
Correcting/Enhancing Images Automatically Note If you selected only one image in the View & Use window, the thumbnail list does not appear and only the preview image appears. 4. Make sure that Auto is selected. 5. Click Auto Photo Fix, Face Sharpener or Digital Face Smoothing. Important Once image is corrected with Auto Photo Fix and saved, it cannot be corrected again with Auto Photo Fix. Auto Photo Fix may not be available for images edited using an application, digital camera, etc.
Correcting/Enhancing Images Automatically Lehekülg 368 / 707 6. Click OK. The entire image is corrected/enhanced automatically and the upper left of the thumbnail and preview image. (Correct/Enhance) mark appears on Note Click Reset Selected Image to undo the correction/enhancement. Select the Apply to all images checkbox to correct/enhance all selected images. 7. Click Save Selected Image or Save All Corrected Images. You can save corrected/enhanced images as new files.
Correcting/Enhancing Images Manually Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions > Correcting/Enhancing Images Manually S402 Correcting/Enhancing Images Manually You can correct/enhance scanned images manually. 1. Scan documents into MP Navigator EX and save them, then open the View & Use window from the Navigation Mode screen and select the photos you want to correct/ enhance.
Correcting/Enhancing Images Manually Note If you selected only one image in the View & Use window, the thumbnail list does not appear and only the preview image appears. 4. Select Manual, then click Correct/Enhance. 5. Click Face Brightener, Face Sharpener, Digital Face Smoothing or Blemish Remover. Note The Face Brightener, Face Sharpener and Digital Face Smoothing effect levels can be changed using the slider that appears by clicking the corresponding buttons. Move the cursor over the image.
Correcting/Enhancing Images Manually The portion in and around the selected area is corrected/enhanced and appears on the upper left of the thumbnail and preview image. Lehekülg 371 / 707 (Correct/Enhance) mark Note You can also drag to rotate the rectangle. Click Undo to undo the latest correction/enhancement. Click Reset Selected Image to cancel all corrections, enhancements and adjustments applied to the selected image. 7. Click Save Selected Image or Save All Corrected Images.
Adjusting Images Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions > Adjusting Images S406 Adjusting Images You can make fine adjustments to the overall brightness, contrast, etc. of images. 1. Scan documents into MP Navigator EX and save them, then open the View & Use window from the Navigation Mode screen and select the photos you want to adjust. Note See " Let's Try Scanning" to scan images into MP Navigator EX.
Adjusting Images Lehekülg 373 / 707 Note If you selected only one image in the View & Use window, the thumbnail list does not appear and only the preview image appears. 4. Select Manual, then click Adjust. 5. Move the slider of the item you want to adjust and set the effect level. When you move a slider, preview image. (Correct/Enhance) mark appears on the upper left of the thumbnail and Note Click Advanced to make fine adjustments to the image brightness and color tone.
Adjusting Images Lehekülg 374 / 707 To save only the images you like, select them and click Save Selected Image. To save all images, click Save All Corrected Images. The file format of adjusted images is JPEG/Exif. 7. Click Exit. Important The adjustments will be lost if you exit before saving adjusted images.
Searching Images Lehekülg 375 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions > Searching Images S407 Searching Images In the View & Use window of the Navigation Mode screen, you can search images saved on your computer and open them in MP Navigator EX. Opened images can be printed, edited, etc. Note Search images in My Box (Scanned/Imported Images), Recently Saved Images or a selected folder and its subfolders.
Searching Images Search in If you know where to look for, select the drive, folder or network from Specify Folder. File Name If you know the file name, enter it. A word or phrase in the file Enter a word or phrase included in the items selected in More Advanced Options. Important For PDF files, you can only search for those created with MP Navigator EX. You cannot search PDF files created or edited in other applications. Also, searching PDF files is available only when keyword search is set.
Searching Images Lehekülg 377 / 707 checkbox, text in Maker, Model, Description and User Comment is searched. If you select the PDF text checkbox, text in PDF files is searched. Important Text in password-protected PDF files cannot be searched. Search subfolders Select this checkbox to search subfolders. Case sensitive Select this checkbox to match case. Match all criteria Searches for files that meet all the specified criteria.
Classifying Images into Categories Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions > Classifying Images into Categories S403 Classifying Images into Categories Display images scanned with MP Navigator EX by category. You can classify images displayed in Unclassified automatically, and also create custom categories. You can drag and drop an image to move it from one category to another.
Classifying Images into Categories Documents: Business Card, Postcard, Standard Size, PDF File, Others Custom categories: Displays your custom categories. To create custom categories, see " Creating Custom Categories ." Unclassified: Displays images that are not classified. Note Click Classify Images to classify images displayed in Unclassified automatically. Click Cancel to stop. Classification may take time if there are many images to classify.
Classifying Images into Categories Lehekülg 380 / 707 View & Use Window Page top
Utilizing Images in MP Navigator EX Lehekülg 381 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX S500 Utilizing Images in MP Navigator EX You can scan images using MP Navigator EX and edit or print the saved images. See the corresponding sections below for details on saving scanned images.
Saving Lehekülg 382 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Saving S112 Saving Save images scanned with MP Navigator EX to a computer. 1. Select the checkboxes of the images you want to save, then click Save. 2. In the Save dialog box, specify the save settings. Specify the destination folder, file name and file type. Save Dialog Box Important You cannot select JPEG/Exif when Document Type is Text(OCR).
Saving Lehekülg 383 / 707 Windows XP: MP Navigator EX folder in My Pictures folder 3. Click Save. Scanned images are saved according to the settings. To further use/edit the scanned images on MP Navigator EX, click Open saved location in the Save Complete dialog box.
Saving as PDF Files Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Saving as PDF Files S113 Saving as PDF Files Save images scanned with MP Navigator EX as PDF files. 1. Select the checkboxes of the images you want to save, then click Save as PDF file. 2. In the Save as PDF file dialog box, specify the save settings. Specify the file type, file name and destination folder.
Saving as PDF Files Lehekülg 385 / 707 Note By default, the scanned images are saved in the following folders. Windows 7: MP Navigator EX folder in My Pictures folder Windows Vista: MP Navigator EX folder in Pictures folder Windows XP: MP Navigator EX folder in My Pictures folder You can set passwords for PDF files. Setting Passwords for PDF Files 3. Click Save. Scanned images are saved according to the settings.
Creating/Editing PDF Files Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Creating/Editing PDF Files S501 Creating/Editing PDF Files Create/edit PDF files using MP Navigator EX. After scanning documents and saving them, open the View & Use window to create PDF files and add/delete pages, rearrange the page order, etc. Important You can create or edit up to 99 pages at one time using MP Navigator EX.
Creating/Editing PDF Files If a password-protected PDF file is selected, you will be prompted to enter the password. Opening/Editing Password-protected PDF Files 3. Add/delete pages as required. To add an existing file, click Add Page and select the file. To delete a page, select it and click Delete Selected Pages. Note You can add PDF, JPEG, TIFF and BMP files. When adding a password-protected PDF file, you will be prompted to enter the password. 4. Rearrange the page order as required.
Creating/Editing PDF Files Lehekülg 388 / 707 as well. 2. Click Open PDF file on the list. The application associated with the file extension (.pdf) by the operating system starts. Important Password-protected PDF files cannot be opened in applications not supporting PDF security. Files may not open if an application that can be associated with PDF files is not installed. 3. Use the application to edit/print the file. For details, refer to the application's manual.
Printing Documents Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Printing Documents S502 Printing Documents You can print multiple scanned images at one time, print at specific quality, etc. using MP Navigator EX. 1. Scan documents into MP Navigator EX and save them, then open the View & Use window from the Navigation Mode screen and select images. Note See " Let's Try Scanning" to scan images into MP Navigator EX.
Printing Documents Lehekülg 390 / 707 Important At normal-size (100%), some images may be printed small or with some portions cropped. In that case, select Auto to resize the print in proportion to the paper size. 4. Click Print. Starts printing. Note When printing a multiple-page PDF file via Print Document, printing may take time depending on your computer. In that case, follow these steps and change settings. Windows 7: 1. From the Start menu, select Devices and Printers. 2.
Printing Photos Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Printing Photos S503 Printing Photos You can print photos using MP Navigator EX or an application that accompanies the machine. After scanning documents and saving them, open the View & Use window to select how you want to print the photos. Note See "Let's Try Scanning" to scan images into MP Navigator EX. You can also select images saved on a computer.
Printing Photos Lehekülg 392 / 707 2. Click Print Photo on the list. 3. Specify print settings as required. In the displayed dialog box, specify paper size, print count, etc. Print Photo Dialog Box 4. Click Print. Starts printing. Note To cancel while spooling, click Cancel. To cancel while printing, click Cancel Printing in the confirmation window for the printer status. To open a confirmation window for the printer status, click printer icon on the taskbar.
Sending via E-mail Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Sending via E-mail S504 Sending via E-mail Send scanned images via e-mail. Important MP Navigator EX is compatible with the following e-mail software programs: - Microsoft Outlook - Windows Mail (Windows Vista) - Outlook Express (Windows XP) (If an e-mail software program does not operate properly, check that the program's MAPI is enabled.
Sending via E-mail Lehekülg 394 / 707 Specify the e-mail software program, destination folder and file name. Send via E-mail Dialog Box Note You can select a compression type when sending JPEG images via e-mail. Click Set... to open a dialog box and select a compression type from High(Low Compression), Standard or Low(High Compression). 4. Click OK. Files are saved according to the settings, and the e-mail software program starts. 5.
Editing Files Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Editing Files S505 Editing Files You can edit images or convert them to text using MP Navigator EX or an application that accompanies the machine. After scanning documents and saving them, open the View & Use window to select what you want to do with the images. Note See "Let's Try Scanning" to scan images into MP Navigator EX. You can also select images saved on a computer.
Editing Files Lehekülg 396 / 707 Converting Documents to Text Scan text in scanned magazines and newspapers and display it in Notepad (included with Windows). Important PDF files cannot be converted to text. 1. Select images and click Edit/Convert. 2. Click Convert to text file on the list. Notepad (included with Windows) starts and editable text appears. Note Only text written in languages that can be selected on the General tab can be extracted to Notepad (included with Windows). Click Set...
Setting Passwords for PDF Files Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Setting Passwords for PDF Files S508 Setting Passwords for PDF Files Set passwords for opening, editing and printing PDF files. You can set two passwords: one for opening the file and one for editing/printing it.
Setting Passwords for PDF Files The Password Security -Settings dialog box opens. Setting Passwords for Existing Files 1. In the View & Use window, select image/PDF files and click PDF. 2. Click Create/Edit PDF file on the list. Creating/Editing PDF Files 3. Edit files in the Create/Edit PDF file window, then click Save Selected Pages or Save All Pages. The Save as PDF file dialog box opens. 4. Select the Password security settings checkbox. The Password Security -Settings dialog box opens.
Setting Passwords for PDF Files Important Up to 32 single-byte alphanumeric characters can be used for the password. Passwords are case sensitive. Select both checkboxes to set both Document Open Password and Permissions Password. You cannot use the same password for both. 3. Click OK. The Confirm Document Open Password or Confirm Permissions Password dialog box opens. Document Open Password Permissions Password 4. Re-enter the password and click OK. The Save as PDF file dialog box returns.
Setting Passwords for PDF Files Lehekülg 400 / 707 Related Topic Opening/Editing Password-protected PDF Files Page top
Opening/Editing Password-protected PDF Files Lehekülg 401 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX > Opening/Editing Password-protected PDF Files S509 Opening/Editing Password-protected PDF Files Enter a password to open or edit/print password-protected PDF files. Password entry method varies by operation. The following procedures are examples only.
Opening/Editing Password-protected PDF Files 2. The Password dialog box opens. Enter the password and click OK. The PDF file opens in the Zoom in dialog box. Note To reopen the file after closing the Zoom in dialog box, re-enter the password. Entering a Password (Permissions Password) to Edit or Print a File 1. In the View & Use window, select PDF files and click PDF or Print.
Opening/Editing Password-protected PDF Files Lehekülg 403 / 707 2. To create a PDF file or edit the file, select Create/Edit PDF file on the list. To print the file, click Print Document. In the Password dialog box, you will be prompted to enter a password. Note If the Document Open Password is set as well, the Document Open Password will be required, then the Permissions Password will be required. 3. Enter the password and click OK. The corresponding dialog box opens.
MP Navigator EX Screens Lehekülg 404 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens S700 MP Navigator EX Screens Learn about the screens and functions of MP Navigator EX.
Navigation Mode Screen Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Navigation Mode Screen S735 Navigation Mode Screen This is one of the startup screens of MP Navigator EX. Select an icon at the top of the screen to display the corresponding tab. Use each tab depending on what you want to do. Scan/Import Scan photos and documents.
Navigation Mode Screen Lehekülg 406 / 707 Page top
Scan/Import Documents or Images Tab Lehekülg 407 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scan/ Import Documents or Images Tab S702 Scan/Import Documents or Images Tab Select Scan/Import in the Navigation Mode screen to display the Scan/Import Documents or Images tab. Scan photos and documents. Auto Scan Opens the Scan/Import window with Auto Scan selected. Scan documents easily by automatically detecting the document type.
View Use Images on your Computer Tab Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > View & Use Images on your Computer Tab S703 View & Use Images on your Computer Tab Select View & Use in the Navigation Mode screen to display the View & Use Images on your Computer tab. You can open images saved on a computer and print them or attach them to e-mail. You can also edit them using an application that accompanies the machine.
View Use Images on your Computer Tab Lehekülg 409 / 707 Preferences The Preferences dialog box opens. In the Preferences dialog box, you can make advanced settings to MP Navigator EX functions. Preferences Dialog Box (Guide) Opens this guide.
Custom Scan with One-click Tab Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Custom Scan with One-click Tab S704 Custom Scan with One-click Tab Select One-click in the Navigation Mode screen to display the Custom Scan with One-click tab. You can complete "from scanning to saving", etc. at one time by simply clicking the corresponding icon. Auto Scan Scan documents by automatically detecting the document type. File format is automatically set.
Custom Scan with One-click Tab Lehekülg 411 / 707 application settings. Custom Dialog Box Start scanning by clicking the button Select this checkbox and click an icon to start scanning immediately. (Switch Mode) Switches to One-click Mode. The One-click Mode screen appears. One-click Mode Screen Show this window at startup Select this checkbox to open the Main Menu at startup. If this checkbox is not selected, the last used screen appears. Preferences The Preferences dialog box opens.
Auto Scan Screen (Scan/Import Window) Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Auto Scan Screen (Scan/Import Window) S744 Auto Scan Screen (Scan/Import Window) Select Scan/Import in the Navigation Mode screen and click Auto Scan or click Auto Scan in the Scan/ Import window to open the Auto Scan screen (Scan/Import window). Open this window when you want to scan documents by automatically detecting the document type.
Auto Scan Screen (Scan/Import Window) Settings and Operation Buttons (View & Use) Click this when you want to open images and PDF files saved on your computer. The View & Use window opens. View & Use Window Auto Scan Displays the screen for scanning documents by automatically detecting the document type, etc. Photos/Documents (Platen) Click this when you want to scan photos, documents, magazines and other printed materials. The screen for scanning photos and documents appears.
Auto Scan Screen (Scan/Import Window) (Rotate Left) Rotates the target image (outlined in orange) 90 degrees counter-clockwise. (Rotate Right) Rotates the target image (outlined in orange) 90 degrees clockwise. (Invert) Inverts the target image (outlined in orange) horizontally. (Trimming) Trims the target image (outlined in orange). "Trimming" is the act of selecting the area you want to keep in a photo and discarding the rest. Click this button to open the Crop window and specify the trimming frame.
Auto Scan Screen (Scan/Import Window) Lehekülg 415 / 707 Related Topic Easy Scanning with Auto Scan Page top
Scan Settings Dialog Box (Auto Scan) Lehekülg 416 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scan Settings Dialog Box (Auto Scan) S745 Scan Settings Dialog Box (Auto Scan) The Scan Settings dialog box opens when you click Specify... in the Scan/Import window. Document Type Auto Mode is set. Important Place documents correctly according to the type of document to be scanned. Otherwise, documents may not be scanned correctly.
Photos/Documents (Platen) Screen (Scan/Import Window) Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Photos/ Documents (Platen) Screen (Scan/Import Window) S708 Photos/Documents (Platen) Screen (Scan/Import Window) Select Scan/Import in the Navigation Mode screen and click Photos/Documents (Platen) or click Photos/ Documents (Platen) in the Scan/Import window to open the Photos/Documents (Platen) screen (Scan/ Import window).
Photos/Documents (Platen) Screen (Scan/Import Window) Important You cannot select Document Type if the Use the scanner driver checkbox is selected. Specify... Specify the document size, resolution, and other advanced scan settings. Scan Settings Dialog Box (Photos/Documents) Important Specify... is not available if the Use the scanner driver checkbox is selected. Use the scanner driver Select this checkbox when you want to scan with ScanGear (scanner driver).
Photos/Documents (Platen) Screen (Scan/Import Window) (Select All) Selects all images in the Thumbnail window. (Cancel All) Cancels all image selections in the Thumbnail window. (Rotate Left) Rotates the target image (outlined in orange) 90 degrees counter-clockwise. (Rotate Right) Rotates the target image (outlined in orange) 90 degrees clockwise. (Invert) Inverts the target image (outlined in orange) horizontally. (Trimming) Trims the target image (outlined in orange).
Photos/Documents (Platen) Screen (Scan/Import Window) Lehekülg 420 / 707 (Cancel Selection) Cancels the selection of the target image (outlined in orange) in the Selected Images area. Selected Images Area Images selected in the Thumbnail window are displayed.
Scan Settings Dialog Box (Photos/Documents) Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scan Settings Dialog Box (Photos/Documents) S713 Scan Settings Dialog Box (Photos/Documents) The Scan Settings dialog box opens when you click Specify... in the Scan/Import window. In the Scan Settings dialog box, you can make advanced scan settings. Document Type Select the type of document to be scanned.
Scan Settings Dialog Box (Photos/Documents) Auto Photo Fix / Auto Document Fix The displayed item varies by Document Type. Auto Photo Fix This is displayed when Document Type is Color Photo. Select this checkbox to automatically analyze the captured scene (landscape, night scene, etc.) and apply suitable corrections. Auto Document Fix This is displayed when Document Type is Color Document, Black and White Document or Magazine(Color).
Scan Settings Dialog Box (Photos/Documents) Lehekülg 423 / 707 Note Select this checkbox when Document Type is text document and show-through is apparent in the scanned image. Correct slanted document Select this checkbox to detect the scanned text and correct the angle (within -0.1 to -10 degrees or +0.1 to +10 degrees) of the document. Important You cannot select this checkbox when Document Type is Color Photo or Black and White Photo.
Save Dialog Box Lehekülg 424 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save Dialog Box S716 Save Dialog Box The Save dialog box opens when you click Save in the Scan/Import window. In the Save dialog box, you can make settings for saving images to a computer. Save in Displays the folder in which to save the scanned images. To change the folder, click Browse... to specify another one.
Save as PDF file Dialog Box Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save as PDF file Dialog Box S717 Save as PDF file Dialog Box In the Save as PDF file dialog box, you can make advanced settings for saving scanned images as PDF files. You can save multiple documents as one PDF file or add pages to a PDF file created with MP Navigator EX.
Save as PDF file Dialog Box Lehekülg 426 / 707 PDF Save each of the selected images as a separate PDF file. PDF(Multiple Pages) Save multiple images in one PDF file. Note PDF(Multiple Pages) is displayed when multiple images are selected. PDF(Add Page) Add the scanned images to a PDF file. The images are added to the end of the PDF file. You cannot rearrange the pages of the PDF file to which the images are added. Important Images can only be added to PDF files created with MP Navigator EX.
PDF Settings Dialog Box Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > PDF Settings Dialog Box S736 PDF Settings Dialog Box In the PDF Settings dialog box, you can specify the PDF compression type and other advanced settings for creating PDF files. Important Only the Security setting is available for images with resolutions outside the range of 75 dpi to 600 dpi.
PDF Settings Dialog Box Lehekülg 428 / 707 - Documents containing figures/images - Hand-written documents - Documents containing both vertical and horizontal lines (tables) PDF Compression Select a compression type for saving. Standard It is recommended that you normally select this setting. High Compresses the file size when saving, allowing you to reduce the load on your network/server. Important Highly compressed PDF images may degrade if you repeatedly save them with high compression.
View Use Window Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > View & Use Window S711 View & Use Window Select View & Use in the Navigation Mode screen and click My Box (Scanned/Imported Images), Specify Folder or Recently Saved Images to open the View & Use window. Open this window to display or use scanned images or images saved on a computer.
View Use Window My Box (Scanned/Imported Images) Displays folders of images (grouped by year, year/month and year/month/date) in My Box in tree view. Select a folder to display its contents in the Thumbnail window to the right. Image date is the scanned, captured or updated date. Specify Folder Displays all hard disks and folders in tree view. Select a folder to display images in the Thumbnail window to the right. Selecting a folder and clicking it highlights the folder name, allowing you to rename it.
View Use Window Lehekülg 431 / 707 (Cancel All) Cancels all image selections in the Thumbnail window. (Image Correction/Enhancement) Allows you to correct the target image (outlined in orange). Click this button to open the Correct/ Enhance Images window in which you can correct/enhance images and also adjust the brightness, contrast, etc. Correct/Enhance Images Window Important Image correction/enhancement cannot be applied to PDF files or black and white binary files.
View Use Window Note A lock icon appears for PDF files with Document Open Password set. Thumbnails may appear as "?" in the following cases. - Opening unsupported images - File size is too large and there is not enough memory to display the image - The file is corrupted When Images are Sorted by Categories Scanned images are displayed by category. Note Some images may not be detected correctly and thus may be classified into wrong categories.
View Use Window Lehekülg 433 / 707 Specific Categories Displays categories containing images, along with the contained images. More images will be displayed in the Thumbnail window, allowing you to find or move images easily. Note Immediately after opening the View & Use window, categories containing images appear along with the contained images, and All Categories is displayed. Click All Categories, to changes to Specific Categories.
Create/Edit PDF file Window Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Create/ Edit PDF file Window S715 Create/Edit PDF file Window Click PDF in the View & Use window, then click Create/Edit PDF file on the list to open the Create/Edit PDF file window. In the Create/Edit PDF file window, you can add/delete pages and rearrange the page order of PDF files created with MP Navigator EX.
Create/Edit PDF file Window Deletes the selected image. Add Page Allows you to select and add an existing PDF file. Note A password will be required to add a password-protected PDF file. Undo Cancels the latest change made. Reset Cancels all the changes made. Save Selected Pages Opens the Save as PDF file dialog box. Specify the save settings. Only the selected page is saved. Note When multiple pages are selected, a multiple-page PDF file is created.
Create/Edit PDF file Window Lehekülg 436 / 707 (Reduce) Reduces the image displayed in Preview. (Full-screen) Displays the entire image. (Thumbnail Mode) Switches to Thumbnail Mode. The pages are displayed in thumbnail view.
Print Document Dialog Box Lehekülg 437 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Print Document Dialog Box S718 Print Document Dialog Box Click Print in the View & Use window, then click Print Document on the list to open the Print Document dialog box. In the Print Document dialog box, you can make advanced settings for printing multiple scanned images at one time. Printer Select the printer to use. Paper Source Select paper source.
Print Document Dialog Box Lehekülg 438 / 707 Print a reduced or enlarged image by specifying a scale in increments of 1%. Auto Scale is adjusted automatically according to the detected paper width and the selected paper size. Image may be printed rotated 90 degrees depending on its size. Scale Select a scale from the list. Important At normal-size (100%), some images may be printed small or with some portions cropped. In that case, select Auto to resize the print in proportion to the paper size.
Print Photo Dialog Box Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Print Photo Dialog Box S729 Print Photo Dialog Box Click Print in the View & Use window, then click Print Photo on the list to open the Print Photo dialog box. Important The Print Photo dialog box will not open if Easy-PhotoPrint EX is installed. Easy-PhotoPrint EX starts instead. PDF files cannot be printed. Note Double-click an image to display it in a different window.
Print Photo Dialog Box Lehekülg 440 / 707 Select this checkbox to print the image on an entire sheet of paper without borders. Important Page Layout setting will be disabled when you select Borderless Printing. This setting is only available with printers that support borderless printing. Orientation Specify the print orientation. Important This setting is available only when Page Layout is Normal-size Printing. For others, the image is automatically rotated according to the aspect ratio of the paper.
Send via E-mail Dialog Box Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Send via E-mail Dialog Box S719 Send via E-mail Dialog Box Click Send in the View & Use window, then click Attach to E-mail on the list to open the Send via E-mail dialog box. In the Send via E-mail dialog box, you can make advanced settings for attaching images to e-mail.
Send via E-mail Dialog Box Lehekülg 442 / 707 Page top
Correct/Enhance Images Window Lehekülg 443 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Correct/ Enhance Images Window S712 Correct/Enhance Images Window Click (Image Correction/Enhancement) in the View & Use window or click Fix photo images in Image Handling Buttons to open the Correct/Enhance Images window.
Correct/Enhance Images Window Auto Photo Fix Applies automatic corrections suitable for photos. Prioritize Exif Info Select this checkbox to apply corrections primarily based on the settings made at the time of shooting. Deselect this checkbox to apply corrections based on the image analysis results. It is recommended that you normally select this setting. Note "Exif" is a standard format for embedding various shooting data in digital camera images (JPEG). Face Sharpener Sharpens out-of-focus faces.
Correct/Enhance Images Window See "Correcting/Enhancing Images Manually " for details. Adjustment Brightness Adjusts the overall image brightness. Move the slider to the left to darken and right to brighten the image. Contrast Adjusts the contrast of the image. Adjust the contrast when the image is flat due to lack of contrast. Move the slider to the left to decrease and right to increase the contrast of the image. Sharpness Emphasizes the outline of the subjects to sharpen the image.
Correct/Enhance Images Window Brightness/Contrast Adjust the brightness and contrast of the image. Move the Brightness slider to the left to darken and right to brighten the image. Move the Contrast slider to the left to decrease and right to increase the contrast of the image. Tone Adjust the brightness balance by specifying Highlight (the brightest level), Shadow (the darkest level) and Midtone (the color in the middle of Highlight and Shadow).
Correct/Enhance Images Window Exit Closes the Correct/Enhance Images window. Correction/Enhancement Face Brightener Corrects the entire image to brighten the facial area in and around the selected area. You can adjust the effect level using the slider. Face Sharpener Corrects the entire image to sharpen the facial area in and around the selected area. You can adjust the effect level using the slider.
Correct/Enhance Images Window (Rotate Right) Rotates the image 90 degrees clockwise. (Invert) Inverts the image horizontally. (Trimming) Trimming is the act of selecting the area you want to keep in a photo and discarding the rest. In the displayed window, drag the white frame to specify the trimming area. Move the cursor inside the white frame and drag to move the trimming area. Note Place the main subjects along the broken white lines or at the intersections to create a balanced image.
Correct/Enhance Images Window Lehekülg 449 / 707 Page top
One-click Mode Screen Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > One-click Mode Screen S701 One-click Mode Screen Click (Switch Mode) at the bottom left of the Navigation Mode screen to display the One-click Mode screen. You can complete "from scanning to saving", etc. at one time by simply clicking the corresponding icon. Auto Scan documents by automatically detecting the document type. File format is automatically set.
One-click Mode Screen Lehekülg 451 / 707 Preferences Dialog Box (Guide) Opens this guide. Important The following restrictions apply when you scan with Document Type set to Auto Mode in the Save dialog box or Custom dialog box. When you want to convert text in the scanned image to text data, specify Document Type (do not select Auto Mode).
Auto Scan Dialog Box Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Auto Scan Dialog Box S742 Auto Scan Dialog Box Click Auto Scan on the Custom Scan with One-click tab or click Auto in the One-click Mode screen to open the Auto Scan dialog box. Supported Documents Photos, postcards, business cards, magazines, newspapers, text documents and BD/DVD/CD. Important The following types of documents cannot be scanned correctly.
Auto Scan Dialog Box The color tone may change from the source image due to corrections. In that case, deselect the checkbox and scan. Save Settings File name Enter the file name of the image to be saved (up to 64 characters). When saving multiple files, 4 digits are appended to each file name. Save as type Select a file type to save the scanned images. Select Auto, JPEG/Exif, TIFF, BMP or PDF. Important When Save as type is Auto, the file format may differ depending on how you place the document.
Auto Scan Dialog Box Lehekülg 454 / 707 Saves and applies the specified settings. Click Cancel instead of Apply to cancel the specified settings. Cancel Cancels the specified settings. The current screen closes. Defaults Returns all settings in the screen to their defaults. Scan Scans and saves documents with the specified settings. When Save as type is Auto, a confirmation appears. Click Open Manual to open this guide (if it is installed).
Save Dialog Box (One-click Mode Screen) Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save Dialog Box (One-click Mode Screen) S721 Save Dialog Box (One-click Mode Screen) Click Save to PC on the Custom Scan with One-click tab or click Save in the One-click Mode screen to open the Save dialog box. Scan Settings Document Type Select the type of document to be scanned. When Auto Mode is selected, the document type is automatically detected.
Save Dialog Box (One-click Mode Screen) To reduce moire, set Document Type to Magazine. Color Mode Select how to scan the document. Document Size Select the size of the document to be scanned. When you select Custom, a screen in which you can specify the document size appears. Select a Units, then enter the Width and Height and click OK. Important When you select Auto Detect, the image may not be scanned at the correct position and size.
Save Dialog Box (One-click Mode Screen) Note When Auto is selected, files are saved in the following formats according to the document type. Photos, postcards, BD/DVD/CD and business cards: JPEG Magazines, newspapers and text documents: PDF You can change the file format from Set.... Images saved as PDF files may not open depending on the application. In that case, select an option other than Auto in Save as type.
Save Dialog Box (One-click Mode Screen) Lehekülg 458 / 707 Application Settings Open with You can select whether to open the View & Use window or Explorer after saving the images. Start scanning by clicking the one-click button Select this checkbox to start scanning when you click an icon in One-click Mode. Apply Saves and applies the specified settings. Click Cancel instead of Apply to cancel the specified settings. Cancel Cancels the specified settings. The current screen closes.
Scan Settings Dialog Box (One-click Mode Screen) Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scan Settings Dialog Box (One-click Mode Screen) S734 Scan Settings Dialog Box (One-click Mode Screen) The Scan Settings dialog box opens when you click Specify... in a dialog box of the One-click Mode screen. In the Scan Settings dialog box, you can make advanced scan settings.
Scan Settings Dialog Box (One-click Mode Screen) Important When you select Auto Detect, the image may not be scanned at the correct position and size. In that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the document with the corner at the arrow (alignment mark) of the Platen. Scanning Resolution Select the resolution at which to scan documents.
Scan Settings Dialog Box (One-click Mode Screen) Note Use ScanGear (scanner driver)'s Advanced Mode tab to correct gutter shadows when scanning non-standard size documents or when custom cropping frames are set. See "Gutter Shadow Correction " for details. Reduce Show-through Select this checkbox to sharpen text in a document or reduce show-through in newspapers. Note Select this checkbox when Document Type is text document and show-through is apparent in the scanned image.
Scan Settings Dialog Box (One-click Mode Screen) Lehekülg 462 / 707 Page top
Save Dialog Box Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save Dialog Box S731 Save Dialog Box The Save dialog box opens when you scan from the Save dialog box or Custom dialog box of the Oneclick Mode screen after selecting Open the save dialog box after scanning the image (Input Exif information). You can specify the file type and destination while viewing the thumbnails. Save as type Select a file type to save the scanned images.
Save Dialog Box Lehekülg 464 / 707 Setting Passwords for PDF Files Important PDF, PDF(Multiple Pages) and PDF(Add Page) cannot be selected for images scanned from the Custom dialog box. You cannot select JPEG/Exif when Color Mode is Black and White. Set... When Save as type is JPEG/Exif You can specify a compression type for JPEG files. Select High(Low Compression), Standard or Low(High Compression).
Exif Settings Dialog Box Lehekülg 465 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Exif Settings Dialog Box S732 Exif Settings Dialog Box You can input Exif information into a file to be saved. "Exif" is a standard format for embedding various shooting data in digital camera images (JPEG). Embedding Exif information into scanned images allows you to organize and print them along with digital camera images.
PDF Dialog Box Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > PDF Dialog Box S725 PDF Dialog Box Click Save as PDF file on the Custom Scan with One-click tab or click PDF in the One-click Mode screen to open the PDF dialog box. Scan Settings Document Type Select the type of document to be scanned. Color Mode Select how to scan the document. Document Size Select the size of the document to be scanned.
PDF Dialog Box that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the document with the corner at the arrow (alignment mark) of the Platen. Resolution Select the resolution at which to scan documents. Resolution Specify... Opens the Scan Settings dialog box in which you can make advanced scan settings.
PDF Dialog Box Lehekülg 468 / 707 To change the file, click Browse... to specify another one. Important Images can only be added to PDF files created with MP Navigator EX. You cannot specify PDF files created with other applications. PDF files edited in other applications cannot be specified as well. Save to a Subfolder with Current Date Select this checkbox to create a subfolder in the folder specified in Save in with the current date and save scanned files in it.
Save as PDF file Dialog Box Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save as PDF file Dialog Box S730 Save as PDF file Dialog Box The Save as PDF file dialog box opens when you scan from the PDF dialog box of the One-click Mode screen after selecting Open the save dialog box after scanning the image. In the Save as PDF file dialog box, you can make settings for saving images to a computer.
Save as PDF file Dialog Box Lehekülg 470 / 707 PDF(Add Page) cannot be selected for images scanned using the Operation Panel of the machine. If a password-protected PDF file is edited, the passwords will be deleted. Reset the passwords. Setting Passwords for PDF Files Set... Make advanced settings for creating PDF files. See " PDF Settings Dialog Box " for details.
Mail Dialog Box Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Mail Dialog Box S722 Mail Dialog Box Click Attach to E-mail on the Custom Scan with One-click tab or click Mail in the One-click Mode screen to open the Mail dialog box. Scan Settings Document Type Select the type of document to be scanned. Color Mode Select how to scan the document. Document Size Select the size of the document to be scanned.
Mail Dialog Box Resolution Select the resolution at which to scan documents. Resolution Use the scanner driver Select this checkbox to display the ScanGear (scanner driver) screen and make advanced scan settings. Color Mode, Document Size, Resolution and other settings in the Mail dialog box will be disabled. Specify these settings in the ScanGear screen. Specify... Opens the Scan Settings dialog box in which you can make advanced scan settings.
Mail Dialog Box Lehekülg 473 / 707 Select Add... to open the Select Mail Program dialog box in which you can select an e-mail software program. If the e-mail software program you want to use is not listed, click Add to List and select it. Start scanning by clicking the one-click button Select this checkbox to start scanning when you click an icon in One-click Mode. Important Start scanning by clicking the one-click button is not displayed when the dialog box is opened directly from Solution Menu EX.
OCR Dialog Box Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > OCR Dialog Box S724 OCR Dialog Box Click OCR on the Custom Scan with One-click tab or in the One-click Mode screen to open the OCR dialog box. Scan Settings Document Type Select the type of document to be scanned. Color Mode Select how to scan the document. Document Size Select the size of the document to be scanned.
OCR Dialog Box Select this checkbox to display the ScanGear (scanner driver) screen and make advanced scan settings. Color Mode, Document Size, Resolution and other settings in the OCR dialog box will be disabled. Specify these settings in the ScanGear screen. Specify... Opens the Scan Settings dialog box in which you can make advanced scan settings.
OCR Dialog Box Lehekülg 476 / 707 - Documents containing text with font size outside the range of 8 points to 40 points (at 300 dpi) - Slanted documents - Documents placed upside down or documents with text in the wrong orientation (rotated characters) - Documents containing special fonts, effects, italics, or hand-written text - Documents with narrow line spacing - Documents with colors in the background of text - Documents containing multiple languages For further procedures, refer to the application's
Custom Dialog Box Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Custom Dialog Box S726 Custom Dialog Box Click Custom on the Custom Scan with One-click tab or in the One-click Mode screen to open the Custom dialog box. Scan Settings Document Type Select the type of document to be scanned. When Auto Mode is selected, the document type is automatically detected. In that case, Color Mode, Document Size and Resolution are automatically set as well.
Custom Dialog Box Note To reduce moire, set Document Type to Magazine. Color Mode Select how to scan the document. Document Size Select the size of the document to be scanned. When you select Custom, a screen in which you can specify the document size appears. Select a Units, then enter the Width and Height and click OK. Important When you select Auto Detect, the image may not be scanned at the correct position and size. In that case, change the size to the actual document size (A4, Letter, etc.
Custom Dialog Box Magazines, newspapers and text documents: PDF You can change the file format from Set.... Images saved as PDF files may not open depending on the application. In that case, select an option other than Auto in Save as type. You cannot set passwords for PDF files. If you select JPEG/Exif when Document Type is not Auto Mode , the Save the JPEG/Exif file in AdobeRGB checkbox will be selectable. Set... When Save as type is Auto You can specify the file format in which to save images.
Custom Dialog Box Lehekülg 480 / 707 Note For further procedures, refer to the application's manual. Reset Cancels the application setting. Set... Allows you to select an application to start. Start scanning by clicking the one-click button Select this checkbox to start scanning when you click an icon in One-click Mode. Apply Saves and applies the specified settings. Click Cancel instead of Apply to cancel the specified settings. Cancel Cancels the specified settings. The current screen closes.
Preferences Dialog Box Lehekülg 481 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Preferences Dialog Box S705 Preferences Dialog Box Click Preferences to open the Preferences dialog box. In the Preferences dialog box, you can specify general MP Navigator EX settings and how to respond when scanning using the Operation Panel, via the General and Scanner Button Settings tabs. Note See the corresponding sections below for details on each tab.
General Tab Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > General Tab S740 General Tab On the General tab, you can specify general MP Navigator EX settings. Product Name Displays the product name of the machine that MP Navigator EX is currently configured to use. If the displayed product is not the one you want to use, select the desired product from the list. Save in (My Box) Displays the folder in which to save scanned documents.
General Tab Lehekülg 483 / 707 displayed. Important You can change which items are installed during installation from the Setup CD-ROM by selecting Custom Install. If you choose not to install some applications with Custom Install, the corresponding MP Navigator EX functions will be unavailable. To use those functions, install the corresponding applications. Note For Convert to text file, Notepad (included with Windows) is displayed. Click Set...
Scanner Button Settings Tab (Save to PC) Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scanner Button Settings Tab (Save to PC) S707 Scanner Button Settings Tab (Save to PC) On the Scanner Button Settings tab, you can specify how to respond when scanning using the Operation Panel of the machine. Event Select Event Save to PC is set. Document Type Auto Scan is set. Actions Scan Settings Document Size This setting is automatically set.
Scanner Button Settings Tab (Save to PC) Automatically save the image to your computer after scanning it Select this to save the images to your computer as specified after scanning them. The File Name, Save as type and Save in settings will be displayed. Important If you select this function, you will not be able to set passwords for PDF files. File Name Enter the file name of the image to be saved (up to 64 characters). Save as type Select a file type to save the scanned images.
Scanner Button Settings Tab (Save to PC) Lehekülg 486 / 707 Save to a Subfolder with Current Date Select this checkbox to create a subfolder in the folder specified in Save in with the current date and save scanned files in it. A subfolder with a name such as "2010_01_01" (Year_Month_Date) will be created. If this checkbox is not selected, files are saved directly in the folder specified in Save in.
Scan Settings Dialog Box (Scanner Button Settings) Lehekülg 487 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scan Settings Dialog Box (Scanner Button Settings) S743 Scan Settings Dialog Box (Scanner Button Settings) The Scan Settings dialog box opens when you click Specify... on the Scanner Button Settings tab of the Preferences dialog box. Document Type Auto Scan is set.
Appendix: Opening Files Other than Scanned Images Lehekülg 488 / 707 Advanced Guide > Scanning > Scanning with the Bundled Application Software > Appendix: Opening Files Other than Scanned Images S011 Appendix: Opening Files Other than Scanned Images You can save or print data other than scanned images using MP Navigator EX.
Opening Images Saved on a Computer Advanced Guide > Scanning > Scanning with the Bundled Application Software > Appendix: Opening Files Other than Scanned Images > Opening Images Saved on a Computer S507 Opening Images Saved on a Computer You can open images saved on a computer and print them or attach them to e-mail using MP Navigator EX. You can also edit them using an application that accompanies the machine. 1. Start MP Navigator EX and open the Navigation Mode screen. Starting MP Navigator EX 2.
Opening Images Saved on a Computer Lehekülg 490 / 707 4. Select the images you want to use, then select what you want to do with them. See the corresponding sections below for details on using images.
Muu rakendustarkvaraga skannimine Lehekülg 491 / 707 Põhjalik juhend > Skannimine > Muu rakendustarkvaraga skannimine Muu rakendustarkvaraga skannimine Mis on ScanGear (skanneridraiver)? Skannimine täpsemate sätetega, kasutades ScanGeari (skanneridraiver) Piltide korrigeerimine ja värvide reguleerimine ScanGeari (skanneridraiver) abil ScanGeari (skanneridraiver) kuvad Lisa: skannimiseks kasulik teave Lehekülje algusesse
What Is ScanGear (Scanner Driver)? Lehekülg 492 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > What Is ScanGear (Scanner Driver)? S201 What Is ScanGear (Scanner Driver)? ScanGear (scanner driver) is software required for scanning documents. It enables you to specify the output size and make image corrections when scanning. ScanGear can be started from MP Navigator EX or from other applications that are compatible with a standard interface called TWAIN.
What Is ScanGear (Scanner Driver)? Lehekülg 493 / 707 Auto Scan Mode Use the Auto Scan Mode tab to scan easily by simply placing the document on the Platen and clicking Scan.
Scanning with Advanced Settings Using ScanGear (Scanner Driver) Lehekülg 494 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) S200 Scanning with Advanced Settings Using ScanGear (Scanner Driver) Starting ScanGear (scanner driver) Starting ScanGear (Scanner Driver) Scanning documents after making simple image corrections Scanning in Basic Mode Scanning documents after making advanced image corrections and bright
Starting ScanGear (Scanner Driver) Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Starting ScanGear (Scanner Driver) S202 Starting ScanGear (Scanner Driver) Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning. ScanGear can be started from MP Navigator EX or an application.
Starting ScanGear (Scanner Driver) Lehekülg 496 / 707 3. Select the Use the scanner driver checkbox in Scan Settings, then click Scan. The ScanGear screen appears. Important Use the scanner driver is not displayed in the Auto Scan dialog box or PDF dialog box. Starting from an Application Follow these steps (example) to start ScanGear from an application. The procedure varies depending on the application. For details, refer to the application's manual. 1. Start the application. 2.
Scanning in Basic Mode Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Scanning in Basic Mode S203 Scanning in Basic Mode Use the Basic Mode tab to scan easily by following the on-screen steps. This section explains how to scan a single document. See "Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) " to scan multiple documents at one time.
Scanning in Basic Mode Lehekülg 498 / 707 Preview image appears in the Preview area. Note Colors are adjusted based on the document type selected in Select Source. 4. Set Destination. 5. Set Output Size. Output size options vary by the item selected in Destination. 6. Adjust the scan area (cropping frame) as required. Adjust the size and position of the cropping frame (scan area) on the preview image. Adjusting Cropping Frames 7. Set Image corrections as required. 8. Click Scan. Starts scanning.
Scanning in Advanced Mode Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Scanning in Advanced Mode S205 Scanning in Advanced Mode Use the Advanced Mode tab to specify the color mode, output resolution, image brightness, color tone, etc. when scanning. This section explains how to scan a single document.
Scanning in Advanced Mode Lehekülg 500 / 707 3. Set Input Settings. Input Settings 4. Click Preview. Preview image appears in the Preview area. Note If you scan without preview, the show-through reduction function will be active. This function is useful when scanning magazines. However, when scanning photos, the color tone of the scanned image may differ from the source due to the show-through reduction function. In that case, use preview first. 5. Set Output Settings. Output Settings 6.
Scanning in Auto Scan Mode Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Scanning in Auto Scan Mode S207 Scanning in Auto Scan Mode Use the Auto Scan Mode tab to scan easily by automatically detecting the type of document placed on the Platen. Important Supported document types are photos, postcards, business cards, magazines, newspapers, text documents and BD/DVD/CD.
Scanning in Auto Scan Mode Lehekülg 502 / 707 Related Topic Auto Scan Mode Tab Page top
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) S208 Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) You can scan two or more photos (small documents) on the Platen at one time on the Basic Mode tab and Advanced Mode tab of ScanGear (scanner driver).
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) 3. Click Preview. Thumbnails of the preview images appear in the Preview area. Images are cropped (scan areas are specified) automatically according to the document size. 4. Set Destination. 5. Set Output Size. 6. Adjust the scan areas (cropping frames) and set Image corrections as required. Note You can correct each image separately. Select the frame you want to correct.
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) 8. Click Scan. Scanning Multiple Documents in Whole Image View Follow these steps if thumbnails are not displayed correctly when previewed or if you want to scan multiple documents as a single image. Note Positions of slanted documents are not corrected in whole image view. 1. After previewing images, click (Thumbnail) on the Toolbar. Switch to whole image view.
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) Note ScanGear's response after scanning can be specified in Status of ScanGear dialog after scanning on the Scan tab of the Preferences dialog box.
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) Lehekülg 507 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) S300 Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) The following sections provide you with tips and know-how on advanced scanning techniques involving color/brightness adjustment, etc.
Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correctio... Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correction, etc.) S308 Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correction, etc.
Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correctio... None Auto Sharpening slightly out-of-focus images Set Unsharp Mask to ON. ON OFF Reducing gradations and stripe patterns Set Descreen to ON. ON OFF Note Printed photos and pictures are displayed as a collection of fine dots. "Moire" is a phenomenon where uneven gradation or a stripe pattern appears when such photos or pictures printed with fine dots are scanned. Descreen is the function for reducing this moire effect.
Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correctio... Reducing graininess Set Grain Correction to Low, Medium or High according to the degree of graininess. None Medium Correcting backlit images Set Backlight Correction to Low, Medium or High according to the degree of backlight. None Medium Correcting shadows that appear between pages when scanning open booklets Set Gutter Shadow Correction to Low, Medium or High according to the degree of shadows.
Adjusting Colors Using a Color Pattern Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Adjusting Colors Using a Color Pattern S301 Adjusting Colors Using a Color Pattern You can preview color changes and reproduce natural colors by using the color pattern function in ScanGear (scanner driver)'s Basic Mode tab. Color Adjustment Correct colors that have faded with time or due to colorcast.
Adjusting Colors Using a Color Pattern Lehekülg 512 / 707 Click an arrow in Color Adjustment to emphasize the corresponding color. Cyan & red, magenta & green and yellow & blue are complementary color pairs (each pair produces a shade of gray when mixed). You can reproduce the natural colors of the scene by reducing the cast color and increasing the complementary color. It is recommended that you find a portion in the image where it should be white, and adjust the colors so that the portion turns white.
Adjusting Saturation and Color Balance Lehekülg 513 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Adjusting Saturation and Color Balance S303 Adjusting Saturation and Color Balance In ScanGear (scanner driver)'s Advanced Mode tab, click (Saturation/Color Balance). Note Click Defaults to reset all adjustments in the current window. Saturation Adjust the image's saturation (vividness).
Adjusting Saturation and Color Balance Lehekülg 514 / 707 entire picture due to the weather or ambient strong colors. Move (Slider) under Color Balance to the left or right to emphasize the corresponding color. Cyan & Red Magenta & Green Yellow & Blue These are complementary color pairs (each pair produces a shade of gray when mixed). You can reproduce the natural colors of the scene by reducing the cast color and increasing the complementary color.
Adjusting Brightness and Contrast Lehekülg 515 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Adjusting Brightness and Contrast S304 Adjusting Brightness and Contrast In ScanGear (scanner driver)'s Advanced Mode tab, click (Brightness/Contrast). Note Click (Down arrow) to switch to detailed view. Click (Up arrow) to return to the previous view.
Adjusting Brightness and Contrast Lehekülg 516 / 707 Note Only Grayscale will be displayed in Channel when Color Mode is Grayscale. Brightness Adjust the image brightness. Move (Slider) under Brightness to the left to darken and right to brighten the image. You can also enter a value (-127 to 127). Darkened Original image Brightened Note Highlights may be lost if you brighten the image too much, and shadows may be lost if you darken the image too much.
Adjusting Histogram Lehekülg 517 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Adjusting Histogram S305 Adjusting Histogram In ScanGear (scanner driver)'s Advanced Mode tab, click (Histogram). Note Click Defaults to reset all adjustments in the current window. Channel Each dot of an image is a mixture of Red, Green and Blue in various proportions (gradation).
Adjusting Histogram Lehekülg 518 / 707 (1) Bright area (2) Dark area (3) Whole image More data is distributed to the highlight side. More data is distributed to the Data is widely distributed between the highlight and shadow. shadow side. Adjusting Histograms (Using the Slider) Select a Channel, then move set as the shadow or highlight. - All parts to the left of - The parts at (Black-point Slider) or (White-point Slider) to specify the level to be (Black-point Slider) will be black (level 0).
Adjusting Histogram Lehekülg 519 / 707 Moving the Mid-point Slider Move the Mid-point Slider to specify the level to be set as the middle of the tonal range. Images with more data distributed to the highlight side Move the Mid-point Slider toward the highlight side. Images with more data distributed to the shadow side Move the Mid-point Slider toward the shadow side.
Adjusting Tone Curve Lehekülg 520 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Adjusting Tone Curve S306 Adjusting Tone Curve In ScanGear (scanner driver)'s Advanced Mode tab, click (Tone Curve Settings). Note Click Defaults to reset all adjustments in the current window. Channel Each dot of an image is a mixture of Red, Green and Blue in various proportions (gradation).
Adjusting Tone Curve Adjusting Tone Curve In Select Tone Curve, select a tone curve from No correction, Overexposure, Underexposure, High contrast, Reverse the negative/positive image and Edit custom curve. No correction (No adjustment) Overexposure (Convex curve) The midtone data of the input side is stretched toward the highlight of the output side, resulting in a bright-toned image when viewed on a monitor.
Adjusting Tone Curve Lehekülg 522 / 707 Edit custom curve You can drag specific points on the Tone Curve to freely adjust the brightness of the corresponding areas.
Setting Threshold Lehekülg 523 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) > Setting Threshold S307 Setting Threshold The brightness of color and grayscale images is expressed in a value between 0 and 255. However, in creating black and white images, all colors are mapped to either black (0) or white (255). "Threshold" is the borderline value that determines a color as black or white.
ScanGear (Scanner Driver) Screens Lehekülg 524 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens S800 ScanGear (Scanner Driver) Screens The following sections describe ScanGear (scanner driver)'s screens and functions, and how to use ScanGear.
Basic Mode Tab Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Basic Mode Tab S801 Basic Mode Tab This mode allows you to scan easily by following the on-screen steps. This section describes the settings and functions available on the Basic Mode tab. (1) Settings and Operation Buttons (2) Toolbar (3) Preview Area Note The displayed items vary by document type and how the screen was opened.
Basic Mode Tab Display Preview Image Preview Performs a trial scan. Note When using the machine for the first time, scanner calibration starts automatically. Wait a while until the preview image appears. Destination Select what you want to do with the scanned image. Print Select this to print the scanned image on a printer. Image display Select this to view the scanned image on a monitor. OCR Select this to use the scanned image with OCR software.
Basic Mode Tab Select an output size in pixels. A cropping frame of the selected monitor size will be displayed and the portion within the cropping frame will be scanned. You can drag the cropping frame to enlarge/reduce it while maintaining the aspect ratio. Add/Delete... Opens the Add/Delete the Output Size dialog box, in which you can specify custom output sizes. You can select this option when Destination is Print or Image display.
Basic Mode Tab Auto Document Fix Sharpens text in a document or magazine for better readability. Important When this checkbox is selected in ScanGear (scanner driver) started from MP Navigator EX, the files can be saved in JPEG/Exif or PDF format only. Scanning may take longer than usual when this checkbox is selected. The color tone may change from the source image due to corrections. In that case, deselect the checkbox and scan. Auto Document Fix may not be effective if the scan area is too small.
Basic Mode Tab Lehekülg 529 / 707 (Thumbnail)/ (Whole Image) Switches the view in the Preview area. Preview Area (Rotate Left) Rotates the preview image 90 degrees counter-clockwise. - The result will be reflected in the scanned image. - The image returns to its original state when you preview again. (Rotate Right) Rotates the preview image 90 degrees clockwise. - The result will be reflected in the scanned image. - The image returns to its original state when you preview again.
Basic Mode Tab Lehekülg 530 / 707 Thumbnails of images cropped to the document size are displayed. Only the images with the checkbox selected will be scanned. Note When multiple images are previewed, different outlines indicate different selection status. - Focus Frame (thick blue outline): The displayed settings will be applied. - Selected Frame (thin blue outline): The settings will be applied to the Focus Frame and Selected Frames simultaneously.
Basic Mode Tab Lehekülg 531 / 707 Related Topic Scanning in Basic Mode Page top
Advanced Mode Tab Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Advanced Mode Tab S803 Advanced Mode Tab This mode allows you to make advanced scan settings such as the color mode, output resolution, image brightness and color tone. This section describes the settings and functions available on the Advanced Mode tab.
Advanced Mode Tab Lehekülg 533 / 707 Enter Setting Name and click Add. The name appears in Favorite Settings List. When you click Save, the item appears in the Favorite Settings list and can be selected, along with the predefined items. To delete an item, select it in Favorite Settings List and click Delete. Click Save to save settings displayed in Favorite Settings List. Note You can set Add/Delete... in Favorite Settings after preview. Save up to 10 items.
Advanced Mode Tab Preview Performs a trial scan. Scan Scanning starts. Note When scanning starts, the progress will be displayed. Click Cancel to cancel the scan. When scanning is completed, a dialog box prompting you to select the next action may open. Follow the prompt to complete. For details, see Status of ScanGear dialog after scanning in " Scan Tab" (Preferences dialog box). It will take time to process the images if the total size of the scanned images exceeds a certain size.
Advanced Mode Tab (Thumbnail)/ Lehekülg 535 / 707 (Whole Image) Switches the view in the Preview area. Preview Area (Clear) Click this button to delete the preview image. It also resets the Toolbar and color adjustment settings. (Crop) Allows you to specify the scan area by dragging the mouse. (Move Image) If an enlarged image is too large to fit in the Preview area, you can click this button and drag the image across the screen until the part you want to see is displayed.
Advanced Mode Tab Removes the selected cropping frame. (Information) Displays the version of ScanGear and the current scan settings (document type, etc.). (Open Guide) This page appears. Preview Area Preview Area This is where a trial image is displayed after you click Preview. You can also check the results of the settings (image corrections, color adjustments, etc.) made in " Settings and Operation Buttons .
Advanced Mode Tab Lehekülg 537 / 707 Note You can specify the scan area (cropping frame) on the displayed image. In thumbnail view, you can only create one cropping frame per image. In whole image view, you can create multiple cropping frames.
Input Settings Lehekülg 538 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Input Settings S804 Input Settings Input Settings allows you to set the following items: Select Source The type of document to be scanned is displayed. Paper Size Select the size of the document to be scanned. This setting is available in whole image view only. When you select a size, the Preview area size changes accordingly.
Input Settings Lehekülg 539 / 707 Select this mode to scan black and white photos, or to create black and white images. This mode renders the image in 256 levels (8 bit) of black and white. Black and White Select this mode to scan photos and documents in black and white. This mode renders the image in black and white. The contrast in the image is divided at certain levels (threshold level) into black and white and is rendered in two colors. The threshold level can be set with (Threshold).
Output Settings Lehekülg 540 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Output Settings S805 Output Settings Output Settings allows you to set the following items: Output Resolution Select the resolution to scan at. The higher the resolution (value), the more detail in your image. Select a resolution from the options displayed by clicking the button, or enter a value within the range of 25 dpi to 19200 dpi (in 1 dpi increments).
Output Settings Output Settings or specify a value (by 1%) for %. The maximum value available for % depends on the Output Resolution. % can be specified for up to 19200 dpi (the maximum available output resolution). Paper Size (L, etc.) & Monitor Size (1024 x 768 pixels, etc.) (Width), (Height) and scale cannot be specified. The preview image will be cropped according to the selected output size and resolution.
Output Settings Lehekülg 542 / 707 message appears when you click Scan. It is recommended that you adjust the settings to reduce Data Size. To continue, scan in whole image view.
Image Settings Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Image Settings S806 Image Settings Important Do not apply these functions to images without moire, dust/scratches or faded colors. The color tone may be adversely affected. Image correction results may not be reflected in the preview image. Note Selectable settings depend on color mode settings. Scanning may take longer when you use Image Settings.
Image Settings Applies Image Adjustment suitable for magazines. Newspaper Applies Image Adjustment suitable for newspapers. Document Applies Image Adjustment suitable for text documents. Important You can set Image Adjustment after preview. You can set this setting when Recommended is selected on the Color Settings tab of the Preferences dialog box. Note If the image is not adjusted properly with Auto, specify the document type.
Image Settings Fading correction will not be applied. Low Select this to correct a small amount of fading and colorcast. Medium It is recommended that you normally select this setting. High Select this to correct a large amount of fading and colorcast. This can affect the tone of the image. Important You can set Fading Correction after preview. You can set this setting when Recommended is selected on the Color Settings tab of the Preferences dialog box.
Image Settings Lehekülg 546 / 707 Gutter Shadow Correction Use this function to correct shadows that appear between pages when scanning open booklets. When you set the Gutter Shadow Correction setting in the preview image, the result will be reflected. Preview the effects before scanning, as results vary depending on the type of document and how it is pressed. Unclear or blurred text/lines caused by curved pages are not corrected. None Gutter shadow will not be corrected.
Color Adjustment Buttons Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Color Adjustment Buttons S807 Color Adjustment Buttons The Color Adjustment Buttons allow you to make fine corrections to the image brightness and color tones. You can adjust the image's overall brightness or contrast, and adjust its highlight and shadow values (histogram) or balance (tone curve).
Color Adjustment Buttons (Histogram) A histogram allows you to see the data concentration at each brightness level of an image. You can specify the darkest level (shadow) and brightest level (highlight) within an image, cut the levels and expand the middle of the tonal range of the image. Adjusting Histogram (Tone Curve Settings) Adjust the brightness of an image by selecting the type of graph (tone curve) showing the balance of tone input and output.
Color Adjustment Buttons Lehekülg 549 / 707 Enter Setting Name and click Add. The name appears in Tone Curve Settings List or Threshold Settings List. Click Save to save. You can load and apply the saved tone curve/threshold settings to a preview image. To load the settings, select the saved item from the pull-down menu. To delete an item, select it in Tone Curve Settings List or Threshold Settings List and click Delete.
Auto Scan Mode Tab Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Auto Scan Mode Tab S813 Auto Scan Mode Tab This mode allows you to scan easily by simply placing documents on the Platen and clicking a button. On the Auto Scan Mode tab, documents are automatically detected. You do not need to specify cropping frames or make image corrections.
Auto Scan Mode Tab Lehekülg 551 / 707 Important When this checkbox is selected in ScanGear (scanner driver) started from MP Navigator EX, the files can be saved in JPEG/Exif or PDF format only. Scanning may take longer than usual when this checkbox is selected. You can set this setting when Recommended is selected on the Color Settings tab of the Preferences dialog box. The color tone may change from the source image due to corrections. In that case, deselect the checkbox and scan.
Preferences Dialog Box Lehekülg 552 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Preferences Dialog Box S808 Preferences Dialog Box Click Preferences... in the ScanGear (scanner driver) screen to open Preferences dialog box. In the Preferences dialog box, you can make advanced settings to ScanGear functions via the Scanner, Preview, Scan and Color Settings tabs.
Scanner Tab Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Scanner Tab S812 Scanner Tab On the Scanner tab, you can specify the following settings. Quiet Mode Select this checkbox to reduce scanner sound by slowing down the scanner head when previewing or scanning documents. Note Scanning takes longer than usual when you enable this function.
Scanner Tab Lehekülg 554 / 707 Page top
Preview Tab Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Preview Tab S809 Preview Tab On the Preview tab, you can specify the following settings. Preview at Start of ScanGear Select what to do with Preview when ScanGear (scanner driver) is started. Automatically Execute Preview ScanGear will automatically start previewing at startup. Display Saved Preview Image The previously previewed image will be displayed.
Preview Tab Lehekülg 556 / 707 No cropping frame will be displayed after previewing. Cropping Size for Thumbnail View Select the cropping size for thumbnails of scanned documents. Larger Displays 105% (in width and height) of the area displayed for the standard size. Standard The standard size. Smaller Displays 95% (in width and height) of the area displayed for the standard size.
Scan Tab Lehekülg 557 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Scan Tab S810 Scan Tab On the Scan tab, you can specify the following settings. Status of ScanGear dialog after scanning Select what to do with ScanGear (scanner driver) after scanning images. Close ScanGear automatically Select this to return to the original application when scanning is completed.
Color Settings Tab Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Color Settings Tab S811 Color Settings Tab On the Color Settings tab, you can specify the following settings. Color Adjustment Select either of the following. You can select one when Color Mode is Color or Grayscale. Recommended Select this to vividly reproduce the tone of a document on the screen. It is recommended that you normally select this setting.
Color Settings Tab Lehekülg 559 / 707 characteristics of the monitor. Adjust the value if your monitor's gamma value does not match the default value set in ScanGear, and the colors of the original image are not accurately reflected in the monitor. Click Defaults to return to the default Monitor Gamma value (2.20). Note Refer to the manual of your monitor to check its gamma value. If it is not written in the manual, contact the manufacturer.
Appendix: Useful Information on Scanning Lehekülg 560 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > Appendix: Useful Information on Scanning S012 Appendix: Useful Information on Scanning Adjusting the cropping frame (scan area) Adjusting Cropping Frames Selecting the best resolution Resolution Learning about file formats File Formats Learning about Color Matching Color Matching Matching the colors between the document and monitor See Monitor Gamma in the following sec
Adjusting Cropping Frames Advanced Guide > Scanning > Scanning with Other Application Software > Appendix: Useful Information on Scanning > Adjusting Cropping Frames S802 Adjusting Cropping Frames You can specify the scan area by creating a cropping frame on the image displayed in the Preview area of the ScanGear (scanner driver) screen. When you click Scan, only the portion within the cropping frame will be scanned and passed to the application.
Adjusting Cropping Frames (Crosshair arrow) when it is positioned within a cropping frame. Click The cursor will change into and drag the mouse to move the entire cropping frame. Note In Advanced Mode tab, you can specify the cropping frame size by entering the values into (Width) and (Height) in Input Settings. Input Settings (Switch Aspect Ratio). However, You can rotate a cropping frame 90 degrees by clicking (Switch Aspect Ratio) is not available when Output Size is Flexible.
Adjusting Cropping Frames Lehekülg 563 / 707 You can create multiple cropping frames and apply different scan settings to each cropping frame. You can also select multiple cropping frames by clicking them while pressing the Ctrl key. If you select multiple cropping frames and change the settings on a tab at the right of ScanGear, the settings will be applied to all the selected cropping frames. When you create a new cropping frame, it retains the settings of the latest cropping frame.
Resolution Lehekülg 564 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > Appendix: Useful Information on Scanning > Resolution S309 Resolution What is Resolution? The data in the image you have scanned is a collection of dots carrying information about brightness and color. The density of these dots is called "resolution", and resolution will determine the amount of detail your image contains. The unit of resolution is dots per inch (dpi).
Resolution Lehekülg 565 / 707 dpi Scale: 200% Setting the Resolution in ScanGear (Scanner Driver) In ScanGear, you can specify the resolution with Output Resolution in Output Settings on the Advanced Mode tab. Example of Appropriate Resolution when Printing to Scale The scanning resolution is automatically set so that the value set in Output Resolution will be the resolution of the scanned image.
Resolution Lehekülg 566 / 707 dpi Important If you double the resolution, the file size quadruples. If the file is too large, the processing speed will slow down significantly, and you will experience inconvenience such as lack of memory. Set the minimum required resolution according to the use of the image.
File Formats Lehekülg 567 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > Appendix: Useful Information on Scanning > File Formats S310 File Formats You can select a file format when saving scanned images. You should specify the most suitable format according to how you want to use the image on which application. Available file formats vary by application and computer (Windows or Macintosh). See below for the characteristics of each image file format.
Color Matching Lehekülg 568 / 707 Advanced Guide > Scanning > Scanning with Other Application Software > Appendix: Useful Information on Scanning > Color Matching S815 Color Matching Color Matching adjusts devices as shown below to match the colors of an image displayed on a monitor or a printed image with the colors of the original document.
Muud skannimismeetodid Lehekülg 569 / 707 Põhjalik juhend > Skannimine > Muud skannimismeetodid Muud skannimismeetodid Skannimine WIA-draiveriga Skannimine juhtpaneeli kasutades (ainult Windows XP) Lehekülje algusesse
Scanning with WIA Driver Advanced Guide > Scanning > Other Scanning Methods > Scanning with WIA Driver S604 Scanning with WIA Driver You can scan an image from a WIA-compliant application and use the image in that application. Windows Image Acquisition (WIA) is a driver model implemented in Windows XP or later. It allows you to scan documents without using an application. Scan documents from a TWAIN-compliant application to specify advanced settings for scanning.
Scanning with WIA Driver Lehekülg 571 / 707 File type Select a file format from JPEG, BMP, PNG and TIFF. Resolution (DPI) Enter the resolution. Specify a value between 50 dpi and 600 dpi. 300 dpi is set by default. Resolution Brightness Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the image. You can also enter a value (-100 to 100). Contrast Move the slider to adjust the contrast.
Scanning with WIA Driver Lehekülg 572 / 707 Brightness Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the image. You can also enter a value (-127 to 127). Contrast Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image, thus softening the image. Moving it to the right will increase the contrast of the image, thus sharpening the image. You can also enter a value (-127 to 127).
Scanning Using the Control Panel (Windows XP Only) Advanced Guide > Scanning > Other Scanning Methods > Scanning Using the Control Panel (Windows XP Only) S605 Scanning Using the Control Panel (Windows XP Only) You can scan images via the Control Panel of Windows XP using the WIA driver. 1. From the Start menu, select Control Panel. 2. Click Printers and Other Hardware > Scanners and Cameras, then double-click WIA Canon (model name). The Scanner and Camera Wizard dialog box opens. 3. Click Next. 4.
Scanning Using the Control Panel (Windows XP Only) Lehekülg 574 / 707 Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image, thus softening the image. Moving it to the right will increase the contrast of the image, thus sharpening the image. You can also enter a value (-127 to 127). Resolution (DPI) Enter the resolution. Specify a value between 50 dpi and 600 dpi. Resolution Picture type Select the type of scan you want for your document.
Hooldus Lehekülg 575 / 707 Põhjalik juhend > Hooldus Hooldus Seadme puhastamine Prindipea joondamine Arvutist hooldamine Lehekülje algusesse
Seadme puhastamine Lehekülg 576 / 707 Põhjalik juhend > Hooldus > Seadme puhastamine Seadme puhastamine Puhastamine Seadme välispinna puhastamine Kopeerimisaluse ja dokumendikaane puhastamine Lehekülje algusesse
Puhastamine Lehekülg 577 / 707 Põhjalik juhend > Hooldus > Seadme puhastamine > Puhastamine U059 Puhastamine Selles jaotises kirjeldatakse seadme hooldamiseks mõeldud puhastamisprotseduure. Tähtis! Ärge kasutage seadme välispinna puhastamisel pabersalvrätte, paberkäterätte, jämedakoelisi lappe või sarnaseid materjale, kuna need võivad seda kriimustada. Kasutage pehmest riidest lappi.
Seadme välispinna puhastamine Lehekülg 578 / 707 Põhjalik juhend > Hooldus > Seadme puhastamine > Seadme välispinna puhastamine U060 Seadme välispinna puhastamine Veenduge, et tegemist oleks pehme riidega, nt prilliklaaside puhastamiseks mõeldud lapp, ning pühkige pinnalt ettevaatlikult mustus ära. Vajadusel siluge riide kortsud enne puhastamist. Tähtis! Enne seadme puhastamist lülitage toide kindlasti välja ning võtke toitejuhe vooluvõrgust välja.
Kopeerimisaluse ja dokumendikaane puhastamine Lehekülg 579 / 707 Põhjalik juhend > Hooldus > Seadme puhastamine > Kopeerimisaluse ja dokumendikaane puhastamine U061 Kopeerimisaluse ja dokumendikaane puhastamine Tähtis! Enne seadme puhastamist lülitage toide kindlasti välja ning võtke toitejuhe vooluvõrgust välja. Pühkige õrnalt puhta pehme ebemevaba lapiga kopeerimisalust (A) ja dokumendikaane sisemist osa (valge leht) (B). Vältige mustuse jäämist, eriti kopeerimisalusele.
Prindipea joondamine Lehekülg 580 / 707 Põhjalik juhend > Hooldus > Prindipea joondamine Prindipea joondamine Prindipea joondamine Lehekülje algusesse
Prindipea joondamine Põhjalik juhend > Hooldus > Prindipea joondamine > Prindipea joondamine U096 Prindipea joondamine Kui prinditud sirgjooned on valesti joondatud või printimistulemus teid mingil muul põhjusel ei rahulda, muutke prindipea asendit. Märkus Kui alles on jäänud liiga vähe tinti, ei prindita prindipea joondusmustrit õigesti. Vahetage vähese tindiga FINE-kassett välja. Regulaarne hooldus 1. Veenduge, et seade on sisse lülitatud. 2.
Prindipea joondamine Lehekülg 582 / 707 kortsumisel ei pruugita seda õigesti skannida. 5. Skannige prindipea asendi kohandamiseks prindipea joonduslehte. 1. Asetage prindipea joondusleht klaasplaadile. Asetage prindipea joondusleht nii, et PRINDITUD KÜLG JÄÄB ALLAPOOLE, ning joondage lehe ülemises vasakus nurgas asuv märk joondamismärgiga ( ). 2. Sulgege õrnalt dokumendikaas, veenduge, et LED-il kuvataks järgmine pilt ja vajutage nuppu Must režiim (Black) või nuppu Värvirežiim (Color) .
Arvutist hooldamine Lehekülg 583 / 707 Põhjalik juhend > Hooldus > Arvutist hooldamine Arvutist hooldamine Prindipeade puhastamine Paberi sööterullide puhastamine Prindipea joondamine Prindipea pihustite kontrollimine Printeri sisemuse puhastamine Lehekülje algusesse
Cleaning the Print Heads Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning the Print Heads P026 Cleaning the Print Heads The print head cleaning function allows you to unclog clogged nozzles in the print head. Perform print head cleaning if printing is faint or a specific color fails to print, even though there is enough ink. The procedure for cleaning the print heads is as follows: Cleaning 1. Open the printer driver setup window 2.
Cleaning the Print Heads Lehekülg 585 / 707 The Nozzle Check dialog box opens after the confirmation message. 5. Check the results To check whether the print quality has improved, click Print Check Pattern. To cancel the check process, click Cancel. Important Cleaning consumes a small amount of ink. Deep Cleaning consumes a larger amount of ink than Cleaning. Cleaning the print heads frequently will rapidly deplete your printer's ink supply. Consequently, perform cleaning only when necessary.
Cleaning the Paper Feed Rollers Lehekülg 586 / 707 Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning the Paper Feed Rollers P027 Cleaning the Paper Feed Rollers Cleans the paper feed roller. Perform feed roller cleaning when there are paper particles sticking to the paper feed roller and paper is not fed properly. The procedure for performing the feed roller cleaning is as follows: Roller Cleaning 1. Prepare the machine Remove all sheets of paper from the rear tray. 2.
Aligning the Print Head Position Advanced Guide > Maintenance > Performing Maintenance from a Computer > Aligning the Print Head Position P028 Aligning the Print Head Position Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. This machine supports two head alignment methods: automatic head alignment and manual head alignment.
Aligning the Print Head Position When you have entered all the necessary values, click OK. Note If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical white streaks. (A) Less noticeable vertical white streaks (B) More noticeable vertical white streaks If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal white streaks.
Aligning the Print Head Position When you have entered all the necessary values, click OK. Note If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical white streaks. (A) Less noticeable vertical white streaks (B) More noticeable vertical white streaks 11. Confirm the displayed message and click OK The third pattern is printed. Important Do not open the Scanning Unit (Cover) while printing is in progress. 12.
Aligning the Print Head Position Lehekülg 590 / 707 When you have entered all the necessary values, click OK. Note If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal white stripes. (A) Less noticeable horizontal white stripes (B) More noticeable horizontal white stripes Note To print and check the current setting, open the Start Print Head Alignment dialog box, and click Print Alignment Value.
Checking the Print Head Nozzles Lehekülg 591 / 707 Advanced Guide > Maintenance > Performing Maintenance from a Computer > Checking the Print Head Nozzles P029 Checking the Print Head Nozzles The nozzle check function allows you to check whether the print heads are working properly by printing a nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print. The procedure for printing a nozzle check pattern is as follows: Nozzle Check 1.
Cleaning Inside the Machine Lehekülg 592 / 707 Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning Inside the Machine P030 Cleaning Inside the Machine Perform bottom plate cleaning before you execute duplex printing to prevent smudges on the back side of the paper. Also perform bottom plate cleaning if ink smudges caused by something other than print data appear on the printed page. The procedure for performing bottom plate cleaning is as follows: Bottom Plate Cleaning 1.
Seadme sätete muutmine Lehekülg 593 / 707 Põhjalik juhend > Seadme sätete muutmine Seadme sätete muutmine Seadme sätete muutmine arvutist Lehekülje algusesse
Seadme sätete muutmine arvutist Lehekülg 594 / 707 Põhjalik juhend > Seadme sätete muutmine > Seadme sätete muutmine arvutist Seadme sätete muutmine arvutist Prindisuvandite muutmine Tihtikasutatava trükiprofiili salvestamine Kasutatava tindikasseti seadistamine Seadme toite haldamine Seadme müra vähendamine Seadme töörežiimi muutmine Lehekülje algusesse
Changing the Print Options Lehekülg 595 / 707 Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Changing the Print Options P413 Changing the Print Options You change the detailed print driver settings for print data that is sent from an application software. Specify this option if you encounter print failures such as part of an image data being cut off. The procedure for changing the print options is as follows: 1. Open the printer driver setup window 2.
Registering a Frequently Used Printing Profile Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Registering a Frequently Used Printing Profile P417 Registering a Frequently Used Printing Profile You can register the frequently used printing profile to Commonly Used Settings on the Quick Setup tab. Unnecessary printing profiles can be deleted at any time. The procedure for registering a printing profile is as follows: Registering a Printing Profile 1.
Registering a Frequently Used Printing Profile Lehekülg 597 / 707 4. Save the settings Enter a name in the Name field, and if necessary, set the items in Options.... Then click OK. The printing profile is saved, and the Quick Setup tab is displayed again. The name and icon are added to the Commonly Used Settings list. Important To save the page size, orientation, and number of copies that was set in each sheet, click Options..., and check each item.
Setting the Ink Cartridge to be Used Lehekülg 598 / 707 Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Setting the Ink Cartridge to be Used P033 Setting the Ink Cartridge to be Used This feature enables you to specify the most appropriate ink cartridge among installed cartridges according to an intended use.
Managing the Machine Power Lehekülg 599 / 707 Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Managing the Machine Power P414 Managing the Machine Power This function allows you to manage the machine power from the printer driver. The procedure for managing the printer power is as follows: Power Off The Power Off function turns off the machine. When you use this function, you will not be able to turn the machine on from the printer driver. 1.
Reducing the Machine Noise Lehekülg 600 / 707 Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Reducing the Machine Noise P034 Reducing the Machine Noise This function allows you to reduce the operating noise. Select when you wish to reduce the operating noise of the printer at night, etc. Using this function may lower the print speed. The procedure for using the quiet mode is as follows: Quiet Mode 1. Open the printer driver setup window 2.
Changing the Machine Operation Mode Lehekülg 601 / 707 Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Changing the Machine Operation Mode P035 Changing the Machine Operation Mode If necessary, switch between various modes of machine operation. The procedure for configuring Custom Settings is as follows: Custom Settings 1. Open the printer driver setup window 2.
Tõrkeotsing Lehekülg 602 / 707 Põhjalik juhend > Tõrkeotsing Tõrkeotsing Kui ilmneb tõrge Seadme toidet ei saa sisse lülitada LED-näidikul kuvatakse tõrkekood LED-näidikut ei ole üldse näha MP Driversit ei saa installida Rakendusprogrammi ei saa installida Ei saa USB-kaabli abil arvutiga korralikult ühendust luua Prinditulemus pole rahuldav Printimine ei alga Kopeerimine/printimine peatub enne töö lõpetamist Seade töötab, kuid tinti ei väljastata Printimiskiirus on oodatust aeglasem FINE-kasseti hoid
Kui ilmneb tõrge Lehekülg 603 / 707 Põhjalik juhend > Tõrkeotsing > Kui ilmneb tõrge U302 Kui ilmneb tõrge Kui printimisel tekib tõrge (nt on paber seadmest otsas või tekkinud on paberiummistus), kuvatakse automaatselt vastav tõrketeade. Järgige tõrketeates kirjeldatud juhiseid. Sõltuvalt teie operatsioonisüsteemist võib see teade olla erinev.
Seadme toidet ei saa sisse lülitada Lehekülg 604 / 707 Põhjalik juhend > Tõrkeotsing > Seadme toidet ei saa sisse lülitada U303 Seadme toidet ei saa sisse lülitada Kontroll 1: vajutage nuppu Sisse (ON) . Kontroll 2: kontrollige, kas toitepistik on kindlalt masina toitejuhtme pessa lükatud, seejärel lülitage toide uuesti sisse. Kontroll 3: tõmmake seadme toitejuhe toitepesast välja, seejärel sisestage toitepistik uuesti toitepessa ja lülitage seade 2 min pärast uuesti sisse.
LED-näidikul kuvatakse tõrkekood Lehekülg 605 / 707 Põhjalik juhend > Tõrkeotsing > LED-näidikul kuvatakse tõrkekood U305 LED-näidikul kuvatakse tõrkekood Häire märgutuli põleb oranžilt Seadme tõrke ilmnemisel põleb märgutuli Häire (Alarm) oranžilt ning LED-näidikul kuvatakse järgmine tõrkekood. Vaadake, milline tõrkekood on LED-näidikul kuvatud, ja võtke tõrke parandamiseks vastavad meetmed. * Olenevalt ilmnenud tõrkest ei põle märgutuli Häire (Alarm) .
LED-näidikul kuvatakse tõrkekood Lehekülg 606 / 707 paigaldatud. paigaldatud. Regulaarne hooldus Tindijäägikogur on peaaegu täis. Vajutage printimise jätkamiseks seadme nuppu Must režiim (Black) või Värvirežiim (Color) . Pöörduge teeninduskeskusse. Allesjäänud tindikogust ei saa tuvastada. Tint võib olla otsas. Keelatakse järelejäänud tinditaseme tuvastamise funktsioon, kuna tinditaset ei saa õigesti tuvastada.
LED-näidikul kuvatakse tõrkekood Vahetage tindikassett välja ja sulgege skanner (kaas). Kui masin prindib ja te ei soovi seda katkestada, vajutage tindikasseti paigaldamiseks printeri nuppu Peata/Lähtesta (Stop/Reset) vähemalt 5 sekundit. Sellisel juhul saab printimine jätkuda olukorras, kui tint on otsas. Keelatakse järelejäänud tinditaseme tuvastamise funktsioon. Vahetage tühi tindikassett välja koheselt peale printimist.
LED-näidikul kuvatakse tõrkekood Lehekülg 608 / 707 seade arvutiga ja joondage prindipea printeridraiveri abil. Prindipea joondamine Roheline toitetuli ja oranž häire märgutuli vilguvad vaheldumisi Kui Toite (POWER) ja Häire (Alarm) märgutuli vilguvad vaheldumisi, nagu alljärgnevalt näidatud, ning LED-näidikul kuvatakse järgmine tõrkekood, siis on tekkinud ilmselt tõrge, mille puhul peate pöörduma hoolduskeskusesse. Toiming Tõrkekood P, 0, 2 Katkestage printimine ja lülitage seade välja.
LED-näidikut ei ole üldse näha Lehekülg 609 / 707 Põhjalik juhend > Tõrkeotsing > LED-näidikut ei ole üldse näha U343 LED-näidikut ei ole üldse näha Kui Toite (POWER) märgutuli on väljas: Seade pole sisse lülitatud. Ühendage toitejuhe ja vajutage nuppu Sisse (ON). Kui Toite (POWER) märgutuli on sees: Võib-olla on LED-näidik energiasäästurežiimi lülitatud. Vajutage mõnda teist juhtpaneeli nuppu kui Sisse (ON).
MP Driversit ei saa installida Lehekülg 610 / 707 Põhjalik juhend > Tõrkeotsing > MP Driversit ei saa installida U308 MP Driversit ei saa installida Kui installimine ei alga ka pärast seda, kui Seadistamise CD-ROM (Setup CD-ROM) on arvuti kettaseadmesse sisestatud: Alustage installimist alltoodud protseduuri järgides. 1. Klõpsake Start, seejärel Arvuti (Computer). Windows XP-s klõpsake Start, seejärel Minu arvuti (My Computer). 2. Topeltklõpsake kuvatavas aknas CD-ROM-i ikoonil.
MP Driversit ei saa installida Lehekülg 611 / 707 Märkus The printer is not detected. Check the connection. Teate sisu sõltub kasutatavast arvutist. MP Driversi taasinstallimiseks järgige sel puhul allkirjeldatud toimingut. 1. Klõpsake Cancel. 2. Klõpsake Start Over kuval Installation Failure. 3. Klõpsake Back ekraanil, mis järgmisena avaneb. 4. Klõpsake Exit PIXMA XXX kuval, seejärel eemaldage CD-ROM. 5. Lülitage seade välja. 6. Taaskäivitage arvuti. 7.
Rakendusprogrammi ei saa installida Lehekülg 612 / 707 Põhjalik juhend > Tõrkeotsing > Rakendusprogrammi ei saa installida U347 Rakendusprogrammi ei saa installida Easy-WebPrint EX ei käivitu või Easy-WebPrint EX menüü ei ilmu Kui Easy-WebPrint EX ei käivitu või selle menüü ei ilmu Internet Explorerisse, kontrollige järgnevaid aspekte. Märkus Easy-WebPrint EX-i saate kasutada Internet Explorer 7 või uuemaga.
Ei saa USB-kaabli abil arvutiga korralikult ühendust luua Lehekülg 613 / 707 Põhjalik juhend > Tõrkeotsing > Ei saa USB-kaabli abil arvutiga korralikult ühendust luua U309 Ei saa USB-kaabli abil arvutiga korralikult ühendust luua Printimise või skannimise kiirus on aeglane/kiire USB-ühendus ei toimi/Kuvatakse sõnum „Seade võib kiiremini toimida” Kui süsteemi keskkond pole kiire USB-standardiga täielikult ühilduv, töötab seade aeglasema kiirusega USB 1.1. standardi järgi.
Prinditulemus pole rahuldav Lehekülg 614 / 707 Põhjalik juhend > Tõrkeotsing > Prinditulemus pole rahuldav U310 Prinditulemus pole rahuldav Kui prinditulemus pole rahuldav, st kui on valgeid triipe, joondamata ridasid ja ebaühtlaseid värve, kontrollige kõigepealt üle paberi ja prindikvaliteedi sätted. Kontroll 1: kas lehekülje suuruse ja prindikandja sätted vastavad seadmesse asetatud paberi suurusele ja tüübile? Kui need sätted on valed, pole õige prinditulemus tagatud.
Tööd ei saa lõpuni printida Lehekülg 615 / 707 Põhjalik juhend > Tõrkeotsing > Prinditulemus pole rahuldav > Tööd ei saa lõpuni printida U311 Tööd ei saa lõpuni printida Kontroll 1: kas prindiandmete maht on väga suur? Klõpsake Print Options lehel Page Setup. Seejärel märkige avanenud dialoogiaknas märkeruut Prevent loss of print data. Kontroll 2: kas teie arvuti kõvakettal on piisavalt ruumi? Kustutage mittevajalikud failid, et saada kettale ruumi.
Prinditulemused puuduvad/väljaprint on hägune/värvid on valed/valged triibud Põhjalik juhend > Tõrkeotsing > Prinditulemus pole rahuldav > Prinditulemused puuduvad/väljaprint on hägune/värvid on valed/valged triibud U313 Prinditulemused puuduvad/väljaprint on hägune/värvid on valed/valged triibud Prinditulemused puuduvad Väljaprint on hägune Värvid on valed Valged triibud Lehekülg 616 / 707
Prinditulemused puuduvad/väljaprint on hägune/värvid on valed/valged triibud Kontroll 1: kas kinnitasite paberi ja prindikvaliteedi sätted? Prinditulemus pole rahuldav Kontroll 2: kas FINE-kassett on korralikult paigaldatud? Kui tindikasseti lukustuskaas pole kindlalt suletud, siis ei pritsita tinti õigesti. Avage skannimisseade (kaas) ja tindikasseti lukustuskaas ning sulgege seejärel tindikasseti lukustuskaas.
Prinditulemused puuduvad/väljaprint on hägune/värvid on valed/valged triibud Kontroll 6: kas kopeerimisalus on määrdunud? Puhastage kopeerimisalust. Kopeerimisaluse ja dokumendikaane puhastamine Kopeerimisel lugege ka järgnevat lõiku: Kontroll 7: kontrollige, et dokument oleks kopeerimisalusele õigesti asetatud.
Värvid on hägused Lehekülg 619 / 707 Põhjalik juhend > Tõrkeotsing > Prinditulemus pole rahuldav > Värvid on hägused U314 Värvid on hägused Kontroll 1: võimaldage värviparandusfunktsioon. Värviparandusfunktsiooni võimaldamine printeri draiverites võib parandada fotode või jooniste värvitulemusi. Valige Vivid Photo lehel Effects printerisätete dialoogiaknas. Kontroll 2: kas FINE-kassett on korralikult paigaldatud? Kui tindikasseti lukustuskaas pole kindlalt suletud, siis ei pritsita tinti õigesti.
Read on joondamata Lehekülg 620 / 707 Põhjalik juhend > Tõrkeotsing > Prinditulemus pole rahuldav > Read on joondamata U315 Read on joondamata Kontroll 1: kas kinnitasite paberi ja prindikvaliteedi sätted? Prinditulemus pole rahuldav Kontroll 2: viige läbi prindipea joondus. Kui prinditud sirgjooned on valesti joondatud või printimistulemus teid mingil muul põhjusel ei rahulda, muutke prindipea asendit.
Prinditud leht kooldub või on tindiplekkidega Lehekülg 621 / 707 Põhjalik juhend > Tõrkeotsing > Prinditulemus pole rahuldav > Prinditud leht kooldub või on tindiplekkidega U316 Prinditud leht kooldub või on tindiplekkidega Prinditud lehel on tindiplekid Prinditud paber kooldub Kontroll 1: kas kinnitasite paberi ja prindikvaliteedi sätted? Prinditulemus pole rahuldav Kontroll 2: kui intensiivsus on määratud kõrgeks, vähendage Intensity sätteid printeridraiveris ja proovige uuesti printida.
Paber on määrdunud/prinditud pind on kriimustatud Põhjalik juhend > Tõrkeotsing > Prinditulemus pole rahuldav > Paber on määrdunud/prinditud pind on kriimustatud U317 Paber on määrdunud/Prinditud pind on kriimustatud Paber on määrdunud Paberi servad on määrdunud Prinditud pind on määrdunud Prinditud pind on kriimustatud Kontroll 1: kas kinnitasite paberi ja prindikvaliteedi sätted? Prinditulemus pole rahuldav Kontroll 2: kas kasutuses on õiget tüüpi paber? Kontrollige järgnevat: Kontrollige, kas prin
Paber on määrdunud/prinditud pind on kriimustatud 1. Rullige paberit kooldumisele vastupidises suunas, nagu allpool näidatud. 2. Kontrollige, kas paber on nüüd sile. Kooldus olnud paberilehed on soovitatav printerisse sööta ükshaaval. Märkus Sõltuvalt prindikandjast võib paber olla määrdunud või seda ei saa korralikult seadmesse sööta isegi siis, kui see pole sissepoole kooldunud.
Paber on määrdunud/prinditud pind on kriimustatud Kontroll 5: kui intensiivsus on määratud kõrge, vähendage Intensity sätet printeridraiveris ja proovige uuesti printida. Kui prindite pilte suure intensiivsusega tavalisele paberile, võib paber liiga palju tinti imada ning laineliseks muutuda, mis omakorda põhjustab hõõrdumist. Arvutist printides Vähendage Intensity sätet printeridraiveris ja proovige uuesti printida. 1. Avage printeridraiveri seadistusaken.
Paber on määrdunud/prinditud pind on kriimustatud Lehekülg 625 / 707 3. Klõpsake vahekaarti Maintenance ning seejärel valikut Custom Settings. 4. Lohistage ooteaja määramiseks liugriba Ink Drying Wait Time ning klõpsake seejärel valikut Send. 5. Kinnitage teadet ja klõpsake valikut OK. Kontroll 11: kas paberit on kraapinud teine printerisse söödetud paber? Sõltuvalt prindikandjast võib paberit kraapida muu sisestatud paber, kui paberit söödetakse tagasalvest.
Paberi tagakülg on määrdunud Lehekülg 626 / 707 Põhjalik juhend > Tõrkeotsing > Prinditulemus pole rahuldav > Paberi tagakülg on määrdunud U318 Paberi tagakülg on määrdunud Kontroll 1: kas kinnitasite paberi ja prindikvaliteedi sätted? Prinditulemus pole rahuldav Kontroll 2: sellisel juhul puhastage masina sisemuse puhastamiseks põhjaplaati. Regulaarne hooldus Märkus Ääristeta, kahepoolne või ülemäärane printimine võib printeri sisemusse jätta tindiplekke.
Väljatrüki äärtel on püstjooned Lehekülg 627 / 707 Põhjalik juhend > Tõrkeotsing > Prinditulemus pole rahuldav > Väljatrüki äärtel on püstjooned U319 Väljatrüki äärtel on püstjooned Kontroll 1: kas seadsite sobivad paberitüübi ja prindikvaliteedi sätted? Prinditulemus pole rahuldav Kontroll 2: kas printerisse asetatud paber on õige suurusega? Kui printerisse asetatud paber on teie määratust suurem, võivad servale ilmuda vertikaaljooned. Määrake õige paberisuurus vastavalt printeris olevale paberile.
Värvid on ebaühtlased või triibulised Põhjalik juhend > Tõrkeotsing > Prinditulemus pole rahuldav > Värvid on ebaühtlased või triibulised U320 Värvid on ebaühtlased või triibulised Värvid on ebaühtlased Värvid on triibulised Kontroll 1: kas kinnitasite paberi ja prindikvaliteedi sätted? Prinditulemus pole rahuldav Kontroll 2: printige pihusti kontrollmuster ja seejärel viige läbi vajalikud hooldustoimingud, nt puhastage prindipea.
Värvid on ebaühtlased või triibulised Lehekülg 629 / 707 Kontroll 3: viige läbi prindipea joondus. Prindipea joondamine Märkus Kui probleem ei lahene pärast prindipea joondamist, joondage prindipea käsitsi vastavalt jaotisele Prindipea joondamine .
Printimine ei alga Põhjalik juhend > Tõrkeotsing > Printimine ei alga U321 Printimine ei alga Kontroll 1: kontrollige, kas toitejuhe on kindlalt ühendatud, ning lülitage seejärel seade sisse. Kui Toite (POWER) märgutuli vilgub roheliselt, siis masin käivitub. Oodake, kuni Toite (POWER) märgutuli lõpetab vilkumise ja jääb roheliselt põlema. Märkus Kui prindite suuri andmemahte (nt fotod või joonistused), võib printimise alustamine kauem aega võtta.
Printimine ei alga Lehekülg 631 / 707 4. Klõpsake vahelehel Pordid (Ports), et kinnitada pordi sätted. Veenduge, et port nimega USBnnn (kus „n“ on arv) on valitud sätte Canon XXX Printer kuvamisel tulbas Printer valiku Prindi järgmis(t)esse porti/portidesse (Print to the following port(s)) jaoks. Kui säte on vale. Taasinstallige MP Drivers. Printimine ei alga ka siis, kui valitud on port nimega USBnnn. Käivitage toimingutesalvest Canon My Printer, siis valige Diagnose and Repair Printer.
Kopeerimine/printimine peatub enne töö lõpetamist Lehekülg 632 / 707 Põhjalik juhend > Tõrkeotsing > Kopeerimine/printimine peatub enne töö lõpetamist U322 Kopeerimine/printimine peatub enne töö lõpetamist Kontroll 1: kas seade on pika aja vältel pidevalt printinud? Kui seade on pika aja vältel pidevalt printinud, võib prindipea üle kuumeneda. Prindipea kaitsmiseks võib seade printimise mõneks ajaks peatada ja seejärel sellega jätkata.
Seade töötab, kuid tinti ei väljastata Lehekülg 633 / 707 Põhjalik juhend > Tõrkeotsing > Seade töötab, kuid tinti ei väljastata U323 Seade töötab, kuid tinti ei väljastata Kontroll 1: kas prindipea pihustid on ummistunud? Et kontrollida tindi väljutamist prindipeast, printige pihustite kontrollmuster. Järgige jaotist Regulaarne hooldus pihustite kontrollmustri printimisel, prindipea puhastamisel ja prindipea sügavpuhastamisel.
Printimiskiirus on oodatust aeglasem Lehekülg 634 / 707 Põhjalik juhend > Tõrkeotsing > Printimiskiirus on oodatust aeglasem U324 Printimiskiirus on oodatust aeglasem Kontroll 1: kas prinditakse režiimis Quiet Mode? Printimiskiirus väheneb, kui valisite arvutis printimiseks suvandi Quiet Mode. Kiiremaks printimiseks ärge valige sätet Quiet Mode. Seadme müra vähendamine Kontroll 2: kas prindikvaliteet on seatud liiga kõrgeks? Suurendage printeridraiveris prindikiiruse sätet.
FINE-kasseti hoidik ei liigu vahetamisasendisse Lehekülg 635 / 707 Põhjalik juhend > Tõrkeotsing > FINE-kasseti hoidik ei liigu vahetamisasendisse U325 FINE-kasseti hoidik ei liigu vahetamisasendisse Kontroll 1: kas Toite (POWER) märgutuli on kustunud? Kontrollige, kas Toite (POWER) märgutuli põleb roheliselt. Prindipea hoidik ei liigu, kui toide pole sisse lülitatud. Kui Toite (POWER) märgutuli on kustunud, sulgege skannimisseade (kaas) ning lülitage printer sisse.
Paberi söötmine ei toimu õigesti Põhjalik juhend > Tõrkeotsing > Paberi söötmine ei toimu õigesti U326 Paberi söötmine ei toimu õigesti Kontroll 1: paberi asetamisel seadmesse pidage silmas järgmist. Kahe või enama paberilehe asetamisel lapake neid enne asetamist. Kahe või enama paberilehe laadimisel joondage paberiservad enne laadimist. Kahe või enama paberilehe laadimisel veenduge, et paberipakk ei ületaks paberi laadimise piiri.
Paberi söötmine ei toimu õigesti Lehekülg 637 / 707 Kui midagi kukub tagasalve, lülitage masin välja, eemaldage see vooluvõrgust, seejärel eemaldage võõrkeha. Kontroll 5: puhastage paberisööterullikut. Regulaarne hooldus Märkus Paberisööterulliku puhastamine kulutab rullikut, seetõttu tehke seda ainult vajaduse korral.
Paberiummistused Lehekülg 638 / 707 Põhjalik juhend > Tõrkeotsing > Paberiummistused U328 Paberiummistused Märkus Kui seadet on vaja printimise ajal ummistuse tekitanud paberi eemaldamiseks välja lülitada, vajutage nuppu Stopp/Tühistus (Stop/Reset) , et enne seadme väljalülitamist printimistööd tühistada.
Paber on tekitanud ummistuse paberiväljastusavasse või tagasalve Lehekülg 639 / 707 Põhjalik juhend > Tõrkeotsing > Paberiummistused > Paber on tekitanud ummistuse paberiväljastusavasse või tagasalve U349 Paber on tekitanud ummistuse paberiväljastusavasse või tagasalve Eemaldage paber alltoodud protseduuri järgides. 1. Tõmmake paber aeglaselt välja kas söötmisavast või paberiväljastussalvest, kasutades lihtsamat varianti.
Muudel juhtudel Lehekülg 640 / 707 Põhjalik juhend > Tõrkeotsing > Paberiummistused > Muudel juhtudel U353 Muudel juhtudel Veenduge järgnevas: Kontroll 1: kas paberiväljastusava ümber on võõrkehi? Kontroll 2: kas tagasalves on võõrkehi? Kui midagi kukub tagasalve, lülitage masin välja, eemaldage see vooluvõrgust, seejärel eemaldage võõrkeha. Kontroll 3: kas paber on kooldunud? Kontroll 3: rullunud paberi korral siluge see ja asetage seadmesse.
Arvuti ekraanil kuvatakse teade Põhjalik juhend > Tõrkeotsing > Arvuti ekraanil kuvatakse teade U331 Arvuti ekraanil kuvatakse teade Kuvatakse teade: Error Number: B200 A printer error has occurred. Turn the printer off and unplug the power cord of the printer from the power supply. Then contact the service center. Kuvatakse teade: Error Number: **** A printer error has occurred. Turn the printer off and then on again. If this doesn't clear the error, see the user's guide for more detail.
Arvuti ekraanil kuvatakse teade (POWER) märgutuli lõpetab vilkumise ja jääb roheliselt põlema. Kontroll 2: veenduge, et printeri port oleks printeridraiveris õigesti konfigureeritud. * Järgnevates juhistes tähistab „ XXX” teie seadme nimetust. 1. Logige administraatoriõigustega kasutajakontoga sisse. 2. Valige menüü Start valik Seadmed ja printerid (Devices and Printers). Windows Vistas valige menüü Start > Juhtpaneel (Control Panel) > Riistvara ja heli (Hardware and Sound) > Printerid (Printers).
Arvuti ekraanil kuvatakse teade Kui ei kuvata sätet USB Printing Support, siis veenduge, et seade on õigesti arvuti külge ühendatud. Kontroll 3: veenduge, et USB-kaabel on kindlalt seadme USB-pordi ja arvutiga ühendatud. 3. Klõpsake vahekaarti General ja veenduge, et seal ei leidu märkust seadme probleemi kohta. Kui kuvatakse seadme tõrge, vt selle kõrvaldamiseks Windowsi spikrit.
Arvuti ekraanil kuvatakse teade Lehekülg 644 / 707 seda kinnituskuva enam ei kuvata. Märkus Teabe saatmise ajal võib ilmuda hoiatusaken, näiteks Interneti turvalisuse aken. Sellisel juhul kontrollige, et programmi nimi on „IJPLMUI.exe“ ning võimaldage see. Kui eemaldate märke valikust Send automatically from the next time, siis teavet teisest korrast alates automaatselt ei saadeta ning järgmise uuringu ajal kuvatakse kinnituskuva. Teabe automaatse saatmise kohta vt osa Kinnituskuva määrangu muutmine: .
Windowsi kasutajatele Põhjalik juhend > Tõrkeotsing > Windowsi kasutajatele U333 Windowsi kasutajatele Printeri olekumonitori ei kuvata Kontrollige: kas printeri olekumonitor on blokeeritud? Veenduge, et printeri olekumonitori menüüs on valitud Enable Status Monitor menüü Option all. 1. Avage printeridraiveri seadistusaken. Printeridraiveri seadistusakna avamine 2. Klõpsake lehel Maintenance valikut View Printer Status. 3. Valige Enable Status Monitor menüüst Option, kui see pole juba valitud.
Windowsi kasutajatele Lehekülg 646 / 707 2. Valige menüü Start > Juhtpaneel (Control Panel), seejärel klõpsake Riistvara ja heli (Hardware and Sound), seejärel sättel Skannerid ja kaamerad (Scanners and Cameras). 3. Valige WIA Canon XXX ser (kus „XXX” on teie seadme nimi), siis klõpsake nupul Atribuudid (Properties). Kuva Kasutajakonto kontroll (User Account Control) kuvamisel klõpsake Jätka (Continue). 4.
Problems with Scanning Lehekülg 647 / 707 Advanced Guide > Troubleshooting > Problems with Scanning S901 Problems with Scanning Scanner Does Not Work ScanGear (Scanner Driver) Does Not Start Error Message Appears and the ScanGear (Scanner Driver) Screen Does Not Appear Scan Quality (Image Displayed on the Monitor) Is Poor Scanned Image Is Surrounded by Extra White Areas Cannot Scan Multiple Documents at One Time Cannot Scan Properly in Auto Scan Mode Slow Scanning Speed "There is not enough memory.
Scanner Does Not Work Lehekülg 648 / 707 Advanced Guide > Troubleshooting > Problems with Scanning > Scanner Does Not Work S902 Scanner Does Not Work Check 1: Make sure that the machine is turned on. Check 2: Connect the USB cable to a different USB port on the computer. Check 3: If the USB cable is connected to a USB hub, remove it from the USB hub and connect it to a USB port on the computer. Check 4: Restart the computer.
ScanGear (Scanner Driver) Does Not Start Lehekülg 649 / 707 Advanced Guide > Troubleshooting > Problems with Scanning > ScanGear (Scanner Driver) Does Not Start S903 ScanGear (Scanner Driver) Does Not Start Check 1: Make sure that the MP Drivers is installed. If it is not installed, insert the Setup CD-ROM into the computer's disc drive, then select Custom Install and install MP Drivers. Check 2: On the File menu of the application, select Select Source and select the machine.
Error Message Appears and the ScanGear (Scanner Driver) Screen Does Not App... Advanced Guide > Troubleshooting > Problems with Scanning > Error Message Appears and the ScanGear (Scanner Driver) Screen Does Not Appear S904 Error Message Appears and the ScanGear (Scanner Driver) Screen Does Not Appear Check 1: Make sure that the machine is turned on. Check 2: Turn off the machine, then reconnect the USB cable and replug the power cord.
Scan Quality (Image Displayed on the Monitor) Is Poor Advanced Guide > Troubleshooting > Problems with Scanning > Scan Quality (Image Displayed on the Monitor) Is Poor S905 Scan Quality (Image Displayed on the Monitor) Is Poor Check 1: Increase the scanning resolution. Resolution Check 2: Set the scale to 100%. Some applications do not display images clearly if the image is too small. Check 3: If moire (stripe pattern) appears, take the following measures and scan again.
Scan Quality (Image Displayed on the Monitor) Is Poor Lehekülg 652 / 707 Color Settings Tab Page top
Scanned Image Is Surrounded by Extra White Areas Lehekülg 653 / 707 Advanced Guide > Troubleshooting > Problems with Scanning > Scanned Image Is Surrounded by Extra White Areas S906 Scanned Image Is Surrounded by Extra White Areas Check: Specify the scan area. Click (Auto Crop) in whole image view of ScanGear (scanner driver) to automatically display the cropping frame (scan area) according to the document size.
Cannot Scan Multiple Documents at One Time Lehekülg 654 / 707 Advanced Guide > Troubleshooting > Problems with Scanning > Cannot Scan Multiple Documents at One Time S907 Cannot Scan Multiple Documents at One Time Check 1: Make sure that the documents are placed correctly on the Platen. Placing Documents Check 2: Scan each item individually. Some applications do not support multiple image scanning.
Cannot Scan Properly in Auto Scan Mode Lehekülg 655 / 707 Advanced Guide > Troubleshooting > Problems with Scanning > Cannot Scan Properly in Auto Scan Mode S916 Cannot Scan Properly in Auto Scan Mode Check 1: Make sure that the documents are placed correctly on the Platen. Placing Documents Check 2: Multiple image scanning may not be supported. Some applications do not support multiple image scanning. In that case, scan each item individually.
Slow Scanning Speed Lehekülg 656 / 707 Advanced Guide > Troubleshooting > Problems with Scanning > Slow Scanning Speed S908 Slow Scanning Speed Check 1: To view the image on a monitor, set the output resolution to around 150 dpi. To print, set it to around 300 dpi. Resolution Check 2: Set Fading Correction, Grain Correction, etc. to None.
"There is not enough memory." Message Is Displayed Lehekülg 657 / 707 Advanced Guide > Troubleshooting > Problems with Scanning > "There is not enough memory." Message Is Displayed S909 "There is not enough memory." Message Is Displayed Check 1: Exit other applications and try again. Check 2: Reduce the resolution or output size and scan again.
Computer Stops Operating during Scanning Lehekülg 658 / 707 Advanced Guide > Troubleshooting > Problems with Scanning > Computer Stops Operating during Scanning S910 Computer Stops Operating during Scanning Check 1: Restart the computer, reduce the output resolution in ScanGear (scanner driver) and scan again. Check 2: Delete unnecessary files to obtain sufficient free hard disk space, then scan again.
Scanner Does Not Work After Upgrading Windows Lehekülg 659 / 707 Advanced Guide > Troubleshooting > Problems with Scanning > Scanner Does Not Work After Upgrading Windows S911 Scanner Does Not Work After Upgrading Windows Check: Disconnect the USB cable, then uninstall and reinstall the MP Drivers and MP Navigator EX. Step 1: Uninstall the MP Drivers. See "Deleting the Unnecessary MP Drivers " for details. Step 2: Uninstall MP Navigator EX. 1.
Software Problems Lehekülg 660 / 707 Advanced Guide > Troubleshooting > Software Problems S930 Software Problems E-mail Software Program You Want to Use Does Not Appear in the Screen for Selecting an E-mail Software Program Scanned Image Is Printed Enlarged (Reduced) Scanned Image Is Enlarged (Reduced) on the Computer Monitor Scanned Image Does Not Open Page top
E-mail Software Program You Want to Use Does Not Appear in the Screen for Sel... Advanced Guide > Troubleshooting > Software Problems > E-mail Software Program You Want to Use Does Not Appear in the Screen for Selecting an E-mail Software Program S931 E-mail Software Program You Want to Use Does Not Appear in the Screen for Selecting an E-mail Software Program Check 1: MP Navigator EX may not support the e-mail software program. The following e-mail software programs are supported.
Scanned Image Is Printed Enlarged (Reduced) Lehekülg 662 / 707 Advanced Guide > Troubleshooting > Software Problems > Scanned Image Is Printed Enlarged (Reduced) S932 Scanned Image Is Printed Enlarged (Reduced) Check: Set the printing size in the application.
Scanned Image Is Enlarged (Reduced) on the Computer Monitor Lehekülg 663 / 707 Advanced Guide > Troubleshooting > Software Problems > Scanned Image Is Enlarged (Reduced) on the Computer Monitor S933 Scanned Image Is Enlarged (Reduced) on the Computer Monitor Check 1: Change the display setting in the application. For details, refer to the application's manual. If you have any questions, contact the manufacturer of the application. Note You cannot reduce the image size in Paint.
Scanned Image Does Not Open Lehekülg 664 / 707 Advanced Guide > Troubleshooting > Software Problems > Scanned Image Does Not Open S934 Scanned Image Does Not Open Check: If the file format is not supported by the application, scan the image again and save it in a popular file format such as JPEG. For details, refer to the application's manual. If you have any questions, contact the manufacturer of the application.
MP Navigator EX Problems Lehekülg 665 / 707 Advanced Guide > Troubleshooting > MP Navigator EX Problems S940 MP Navigator EX Problems Cannot Scan at the Correct Size Position or Size of the Image Cannot be Detected Correctly When Scanning Using the Operation Panel Document Is Placed Correctly, but the Scanned Image Is Slanted Document Is Placed Correctly, but the Orientation Changes in the Scanned Image Page top
Cannot Scan at the Correct Size Lehekülg 666 / 707 Advanced Guide > Troubleshooting > MP Navigator EX Problems > Cannot Scan at the Correct Size S941 Cannot Scan at the Correct Size Check 1: Make sure that the documents are placed correctly on the Platen. Placing Documents Check 2: Set Document Size to the actual document size and scan again. If the matching size is not found, scan at a larger size and trim the image. See the Toolbar ( (Trimming)) in " Correct/Enhance Images Window " for details.
Position or Size of the Image Cannot be Detected Correctly When Scanning Using... Lehekülg 667 / 707 Advanced Guide > Troubleshooting > MP Navigator EX Problems > Position or Size of the Image Cannot be Detected Correctly When Scanning Using the Operation Panel S942 Position or Size of the Image Cannot be Detected Correctly When Scanning Using the Operation Panel Check 1: Make sure that the documents are placed correctly on the Platen.
Document Is Placed Correctly, but the Scanned Image Is Slanted Lehekülg 668 / 707 Advanced Guide > Troubleshooting > MP Navigator EX Problems > Document Is Placed Correctly, but the Scanned Image Is Slanted S943 Document Is Placed Correctly, but the Scanned Image Is Slanted Check: In MP Navigator EX, deselect the Correct slanted document checkbox and scan again.
Document Is Placed Correctly, but the Orientation Changes in the Scanned Image Advanced Guide > Troubleshooting > MP Navigator EX Problems > Document Is Placed Correctly, but the Orientation Changes in the Scanned Image S944 Document Is Placed Correctly, but the Orientation Changes in the Scanned Image Check: In MP Navigator EX, deselect the Detect the orientation of text documents and rotate images checkbox and scan again.
Kui probleemi ei õnnestu lahendada Lehekülg 670 / 707 Põhjalik juhend > Tõrkeotsing > Kui probleemi ei õnnestu lahendada U151 Kui probleemi ei õnnestu lahendada Kui teil ei õnnestu probleemi käesolevas peatükis toodud juhiste abil lahendada, pöörduge seadme müüja poole või teeninduskeskusesse. Canoni tugipersonal on saanud väljaõppe, mis võimaldab neil anda kliente rahuldavat tehnilist tuge.
KKK Lehekülg 671 / 707 Põhjalik juhend > Tõrkeotsing > KKK U340 KKK Prinditulemused puuduvad/väljaprint on hägune/värvid on valed/valged triibud Seade töötab, kuid tinti ei väljastata MP Driversit ei saa installida Printimine ei alga Kopeerimine/printimine peatub enne töö lõpetamist Kirjutustõrge/Väljastustõrge/Sidetõrge Prinditulemus pole rahuldav Paberiummistused Paberi söötmine ei toimu õigesti Lehekülje algusesse
Instructions for Use (Printer Driver) Advanced Guide > Troubleshooting > Instructions for Use (Printer Driver) P036 Instructions for Use (Printer Driver) This printer driver is subject to the following restrictions. Keep the following points in mind when using the printer driver. Restrictions on the Printer Driver With some applications, the Copies setting in the Page Setup tab of the printer driver may not be enabled.
Instructions for Use (Printer Driver) Lehekülg 673 / 707 4. Open Word's Print dialog box again. 5. Open the printer driver setup window again and click OK. 6. Start printing. If bitmap printing is enabled in Adobe Illustrator (Adobe Systems Inc), printing may take time or some data may not be printed, printing may take time or some data may not be printed. Print after unchecking the Bitmap Printing check box in the Print dialog box.
General Notes (Scanner Driver) Advanced Guide > Troubleshooting > General Notes (Scanner Driver) S004 General Notes (Scanner Driver) ScanGear (scanner driver) is subject to the following restrictions. Keep these points in mind when using it. Scanner Driver Restrictions When using the NTFS file system, the TWAIN data source may not be invoked. This is because the TWAIN module cannot be written to the winnt folder for security reasons. Contact the computer's administrator for help.
General Notes (Scanner Driver) Lehekülg 675 / 707 Custom Insert in the Insert Picture from Scanner or Camera screen. Otherwise, images may not be scanned correctly. When scanning images into Microsoft Office 2007 (Word, Excel, PowerPoint, etc.), use Microsoft Clip Organizer. Images may not be scanned correctly in some applications. In that case, increase the operating system's virtual memory and retry.
Lisa Lehekülg 676 / 707 Põhjalik juhend > Lisa Lisa Prindiala Kuidas dokumendikaant ära võtta/kinnitada? Prinditava dokumendi redigeerimine või prindiajaloo uuesti printimine Soovimatute prinditööde kustutamine MP Driversi uuendamine On-Screen Manuali desinstallimine Seadme transportimine Printeridraiveri seadistusakna avamine Märkus toitejuhtme lahtiühendamise kohta Printeri võrgus jagamine Lehekülje algusesse
Prindiala Lehekülg 677 / 707 Põhjalik juhend > Lisa > Prindiala U504 Prindiala Parima prindikvaliteedi saamiseks võimaldab seade prindikandja serva veerist muuta. Tegelik prindiala on ala, mis jääb veeriste vahele. Soovitatav prindiala Prinditav ala : Canon soovitab kasutada printimiseks seda ala. : ala, millele on võimalik printida. Võtke siiski arvesse, et printimine sellele alale võib mõjutada prindikvaliteeti ning paberi söötmistäpsust.
Muu formaat kui Letter, Legal, Envelopes Lehekülg 678 / 707 Põhjalik juhend > Lisa > Prindiala > Muu formaat kui Letter, Legal, Envelopes U502 Muu formaat kui Letter, Legal, Envelopes Formaat Prinditav ala (laius x kõrgus) A5* 141,2 x 202,0 mm / 5,56 x 7,95 tolli A4 203,2 x 289,0 mm / 8,00 x 11,38 tolli B5* 175,2 x 249,0 mm / 6,90 x 9,80 tolli 10 x 15 cm / 4" x 6" 94,8 x 144,4 mm / 3,73 x 5,69 tolli 10 x 20 cm / 4" x 8"* 94,8 x 195,2 mm / 3,73 x 7,69 tolli 13 x 18 cm / 5" x 7"* 120,2 x 169,
Letter, Legal Lehekülg 679 / 707 Põhjalik juhend > Lisa > Prindiala > Letter, Legal U503 Letter, Legal Prinditav ala (laius x kõrgus) Formaat Letter 203,2 x 271,4 mm / 8,00 x 10,69 tolli Legal* 203,2 x 347,6 mm / 8,00 x 13,69 tolli *Seda leheküljeformaati saab kasutada ainult arvutist printimisel.
Ümbrikud Lehekülg 680 / 707 Põhjalik juhend > Lisa > Prindiala > Ümbrikud U505 Ümbrikud Formaat Soovitatav prindiala (laius x kõrgus) European DL* 103,2 x 179,5 mm / 4,06 x 7,07 tolli US Comm. Env. #10* 98,0 x 200,8 mm / 3,86 x 7,91 tolli *Seda leheküljeformaati saab kasutada ainult arvutist printimisel.
Kuidas dokumendikaant ära võtta/kinnitada? Lehekülg 681 / 707 Põhjalik juhend > Lisa > Kuidas dokumendikaant ära võtta/kinnitada? U514 Kuidas dokumendikaant ära võtta/kinnitada? Dokumendikaane äravõtmine Hoidke dokumendikaant vertikaalselt. Dokumendikaane kinnitamine Nagu alloleval illustratsioonil näidatud, sisestage dokumendikaane kinnitamiseks mõlemad dokumendikaane hinged (A) vertikaalselt hoidikusse (B) kuni nende peatumiseni.
Editing the Print Document or Reprinting from the Print History Advanced Guide > Appendix > Editing the Print Document or Reprinting from the Print History P048 Editing the Print Document or Reprinting from the Print History This function is unavailable when the standard IJ printer driver is used. In the Canon IJ XPS preview window, you can edit the print document or retrieve the document print history to print the document.
Editing the Print Document or Reprinting from the Print History 1. Open the printer driver setup window 2. Set the preview Check the Preview before printing check box on the Quick Setup tab or the Main tab. 3. Complete the setup Click OK. The Canon IJ XPS Preview will start and the print result will be displayed before printing. 4. Editing print documents and print pages Combining print documents You can combine multiple print documents to form a single document.
Editing the Print Document or Reprinting from the Print History Lehekülg 684 / 707 Reprinting from the Print History When you click Save Print History on the File menu to enable the setting, the document printed from the preview is saved, and you can reprint the document with the same settings. 1. Displaying the print history Select the Start menu -> All Programs -> "Your model name" -> View Print History XPS. The saved print document is displayed in the preview.
Deleting the Undesired Print Job Lehekülg 685 / 707 Advanced Guide > Appendix > Deleting the Undesired Print Job P037 Deleting the Undesired Print Job If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. If the printer does not start printing, cancelled or failed print job data may be remaining. Delete the undesired print job by using the Canon IJ Status Monitor. 1.
MP Driversi uuendamine Lehekülg 686 / 707 Põhjalik juhend > Lisa > MP Driversi uuendamine MP Driversi uuendamine Uusimate MP Driversite hankimine Mittevajaliku MP Driversi kustutamine Enne MP Driversite installimist MP Driversite installimine Lehekülje algusesse
Obtaining the Latest MP Drivers Lehekülg 687 / 707 Advanced Guide > Appendix > Updating the MP Drivers > Obtaining the Latest MP Drivers P038 Obtaining the Latest MP Drivers The MP Drivers include a printer driver and scanner driver (ScanGear). By updating the MP Drivers to the latest version of the MP Drivers, unresolved problems may be solved. Access our web site through the Internet and download the latest MP Drivers for your model.
Deleting the Unnecessary MP Drivers Advanced Guide > Appendix > Updating the MP Drivers > Deleting the Unnecessary MP Drivers P039 Deleting the Unnecessary MP Drivers The MP Drivers which you no longer use can be deleted. When deleting the MP Drivers, first exit all programs that are running. The procedure to delete the unnecessary MP Drivers is as follows: When There is an Uninstaller 1.
Deleting the Unnecessary MP Drivers Lehekülg 689 / 707 If you are using Windows Vista, when the User Account Control dialog box appears, click Continue. Then when the confirmation message appears, click Yes. The icon is deleted. 3. Select the printer driver to be deleted If you are using Windows 7, click any icon in Printers and Faxes. On the commandbar, click Print server properties, and then click the Drivers tab. If the Change Driver Settings button is displayed, click that button.
Before Installing the MP Drivers Lehekülg 690 / 707 Advanced Guide > Appendix > Updating the MP Drivers > Before Installing the MP Drivers P040 Before Installing the MP Drivers This section describes the items that you should check before installing the MP Drivers. You should also refer to this section if the MP Drivers cannot be installed. Checking the Machine Status Properly connect the personal computer and the machine.
Installing the MP Drivers Advanced Guide > Appendix > Updating the MP Drivers > Installing the MP Drivers P041 Installing the MP Drivers You can access our web site through the Internet and download the latest MP Drivers for your model. The procedure for installing the downloaded MP Drivers is as follows: 1. Turn off the machine 2. Start the installer Double-click the icon of the downloaded file. The installation program starts.
Installing the MP Drivers Lehekülg 692 / 707 Page top
On-Screen Manuali desinstallimine Lehekülg 693 / 707 Põhjalik juhend > Lisa > On-Screen Manuali desinstallimine U509 On-Screen Manuali desinstallimine Kõigi elektrooniliste juhendite desinstallimiseks toimige järgmiselt. Enne elektrooniliste juhendite desinstallimist väljuge kõigist avatud elektroonilistest juhenditest. 1. Klõpsake Start > Kõik programmid (All Programs) > Canon XXX Manual (kus „XXX“ on teie seadme nimi) > Desinstalli (Uninstall). 2. Klõpsake kinnitusteate ilmudes valikut OK.
Seadme transportimine Lehekülg 694 / 707 Põhjalik juhend > Lisa > Seadme transportimine U510 Seadme transportimine Seadme teisaldamisel pakkige seade originaalpakendisse. Originaalpakendi puudumisel pakkige seade ettevaatlikult vastupidavasse kasti ja kaitske pakkematerjaliga. Tähtis! Ärge transportige ega hoidke seadet kald-, vertikaal- või ümberpööratud asendis, kuna tint võib lekkida ja seadet kahjustada. 1. Lülitage seade välja. 2.
Printeridraiveri seadistusakna avamine Lehekülg 695 / 707 Põhjalik juhend > Lisa > Printeridraiveri seadistusakna avamine U511 Printeridraiveri seadistusakna avamine Printeridraiveri seadistusakent saab kuvada kasutatava tarkvaraprogrammi või Windowsi menüü Start kaudu. Avage printeridraiverite seadistusaken läbi rakendustarkvara Järgige printimise ajal prindimäärangute tegemisel allolevaid toiminguid. 1. Valige kasutatavas tarkvaraprogrammis printimisel kastutatav määrang.
Märkus toitejuhtme lahtiühendamise kohta Lehekülg 696 / 707 Põhjalik juhend > Lisa > Märkus toitejuhtme lahtiühendamise kohta U516 Märkus toitejuhtme lahtiühendamise kohta Toitejuhtme lahtiühendamiseks järgige alltoodud protseduuri. Tähtis! Kui eemaldate toitejuhtme, vajutage nuppu Sisse (ON), siis veenduge, et Toite (POWER) märgutuli ei põle. Seesoleva masina toitejuhtme eemaldamine võib põhjustada prindipea kuivamist või ummistumist ja printimiskvaliteet võib kannatada. 1.
Sharing the Printer on a Network Lehekülg 697 / 707 Advanced Guide > Appendix > Sharing the Printer on a Network P042 Sharing the Printer on a Network When multiple computers are being used in the network environment, you can share the printer connected to one computer with the other computers. The Windows versions of the computers connected to the network do not necessarily have to be the same.
Settings on Print Server Lehekülg 698 / 707 Advanced Guide > Appendix > Sharing the Printer on a Network > Settings on Print Server P043 Settings on Print Server When you use the printer on a network, set up the printer driver for sharing on the server system. The procedure for setting up the print server systems is as follows: 1. Install the printer driver on the print server system For details on installation instructions, refer to the "Install the Software" in the manual: Getting Started. 2.
Settings on Client PC Advanced Guide > Appendix > Sharing the Printer on a Network > Settings on Client PC P044 Settings on Client PC After setting up the print server system, set up the client system. The procedure for setting up the client systems is as follows: If you are using Windows 7 or Windows Vista 1. Install the printer driver on the client systems For installation instructions, see " Installing the MP Drivers .
Settings on Client PC Lehekülg 700 / 707 2. Start the wizard Select the start menu -> Control Panel -> Printers and Other Hardware -> Printers and Faxes -> Add a printer. When Welcome to the Add Printer Wizard screen appears, click Next. 3. Add a printer Select A network printer, or a printer attached to another computer, then click Next. On the Specify a Printer window, click Next and then search for the print server system.
Restrictions on Printer Sharing Advanced Guide > Appendix > Sharing the Printer on a Network > Restrictions on Printer Sharing P415 Restrictions on Printer Sharing If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. These are restrictions that apply when you are using a printer in a network environment. Check the restrictions for the environment you are using.
Restrictions on Printer Sharing Lehekülg 702 / 707 Page top
Using Easy-PhotoPrint EX Lehekülg 703 / 707 Advanced Guide > Using Easy-PhotoPrint EX A001 Using Easy-PhotoPrint EX --- Transforming Your Photos into Creative Works of Art --Easy-PhotoPrint EX allows you to create albums, calendars and stickers easily using photos taken with digital cameras. You can also print borderless photos easily. Start Easy-PhotoPrint EX Click Here: Easy-PhotoPrint EX Note See the section below for details on how to use Easy-PhotoPrint EX.
Using Easy-PhotoPrint EX Lehekülg 704 / 707 CHECK! Select Album to add text and frames. You cannot decorate photos with Photo Print. Create a Calendar Using Your Favorite Photos Create calendars easily with Easy-PhotoPrint EX. Create your own calendar using your favorite photos! It'll be exciting to turn the calendar pages. You can use all kinds of photos. You can also create 2-month, 6-month and 12-month calendars.
Using Easy-PhotoPrint EX Lehekülg 705 / 707 Page top
Using MP Navigator EX Advanced Guide > Using MP Navigator EX S001 Using MP Navigator EX MP Navigator EX is an application that enables you to easily scan photos and documents. It is suitable even for beginners. Start MP Navigator EX Click Here: MP Navigator EX Note See "Let's Try Scanning" for details on how to scan images using MP Navigator EX. Scan Photos and Documents You can scan easily by navigating through MP Navigator EX screens. You can also save/print scanned images using MP Navigator EX.
Using MP Navigator EX Lehekülg 707 / 707 Scan with One-click In One-click Mode, MP Navigator EX completes from scanning to saving, with a click of an icon. One-click Mode also allows you to scan and save images as PDF files or attach them to e-mail automatically. Scan and Correct/Enhance Photos You can easily correct/enhance scanned photos using MP Navigator EX. You do not need to use other applications.