Operation Manual

* After printing is finished, disable the setting for preventing double-feed of plain paper; otherwise, the setting is

applied from the next time.

• To set by using the operation panel

Press and hold the Stop button until the Alarm lamp flashes 12 times, release the button, then press the

Color button to enable the Prevent paper double-feed function.

To disable the Prevent paper double-feed function, press and hold the Stop button until the Alarm lamp

flashes 12 times, release the button, then press the Black button.

• To set by using your computer

Open the printer driver setup window, and in Custom Settings in the Maintenance sheet, select the

Prevent paper double-feed check box, and then click OK.

To open the printer driver setup window, see How to Open the Printer Driver Setup Window.

Note

• Printing speed will be reduced if Prevent paper double-feed function is enabled.

Check7

Clean the paper feed roller.

Cleaning the Paper Feed Roller

Note

•

Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.