<< Previous Next >> Installing Your Multifunction to Additional Computers on Your Network PIXMA MG6120 Mac OS 1
<< Previous Next >> Installing Your Multifunction to Additional Computers on Your Network PIXMA MG6120 Mac OS Preparing to Connect My Multifunction To My Network 3 Installing The MG6120 Software 5 2
Preparing to Connect My Multifunction To My Network << Previous Next >> Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network.
Preparing to Connect My Multifunction To My Network << Previous Next >> An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Be sure to prepare an access point. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment.
Installing The MG6120 Software << Previous Next >> If the machine is already connected to a wireless connection, it can be used from additional computers on the same network. Before we begin: • Log on as the administrator (or a member of the Administrators group). • Quit all running applications before installation. • If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network.
Installing The MG6120 Software << Previous Next >> Step 1 Step 2 Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive. If you are using Windows, the setup program starts automatically. Double-click the Setup icon of the CD-ROM folder to proceed to the following screen. Enter your administrator name and password, then click OK. Note: If the program does not start automatically, double-click the CD-ROM icon in Computer or My Computer.
Installing The MG6120 Software << Previous Step 3 Step 4 Click Easy Install Click Install Next >> The drivers, application software, and on-screen manuals are installed. Note: If you want to select particular items to install, click Custom Install.
Installing The MG6120 Software << Previous Next >> Step 5 Step 6 Select Use the printer on network, then click Next. When the Printer Detection screen appears, click Next. IMPORTANT IF THE PRINTER CONNECTION SCREEN APPEARS INSTEAD OF THE SCREEN ABOVE, THE CONNECTION METHOD IS NOT CORRECTLY SELECTED IN 5. CLICK CANCEL AND START AGAIN FROM STEP 1, THEN BE SURE TO SELECT USE THE PRINTER ON NETWORK IN 5.
Installing The MG6120 Software << Previous Step 7 Step 8 On the Canon IJ Network Tool screen, select MG6100 series in Printers, then click Next. When the Register Printer and Scanner screen appears, click Register Printer. Next >> Note: The alphanumeric characters after Canon MG6100 series is the machine's Bonjour service name or MAC address. If the machine is not detected, refer to the printed manual: Network Setup Troubleshooting.
Installing The MG6120 Software << Previous Next >> Step 9 Step 10 For OS X v. 10.6.x and 10.5.x only For OS X v. 10.4.11 only Select Canon MG6100 series canonijnetwork and click Add. 1. When the Printer List window appears, click Add. Go to Step 11. Note: It may take a minute or two before the printer appears in the list Note: When the “You have no printers available”. screen appears, click Add.
Installing The MG6120 Software << Previous Next >> Step 10 (continued) Step 10 (continued) 2. Click More Printers in the Printer Browser window. 3. Click More Printers in the Printer Browser window. 4. Make sure that Canon MG6100 series is added to the list of printers.
Installing The MG6120 Software << Previous Next >> Step 11 Step 12 When the Register Printer and Scanner screen appears, click Register Scanner. Select MG6100 series on the Scanfrom-Operation-Panel Settings screen, then click OK.
Installing The MG6120 Software << Previous Next >> Step 13 Step 14 Click Next on the Register Printer and Scanner screen. Follow any on-screen instructions to proceed with the remaining software installation.
