Photo Printer Quick Start Guide

Basic Printing

 Loading Envelopes in the Auto Sheet Feeder

Use either European DL or US Comm. Env. #10 size envelopes.

The address is rotated automatically to match the direction of the envelope when

printing.

z Do not use envelopes with embossed or treated surfaces, a double

flap, pressure seals or sticker flaps.

z Select either DL Env. (Windows) / DL Envelope (Macintosh) or Comm.

Env. #10 (Windows) / #10 Envelope (Macintosh) in the printer driver

according to the envelope size you are using. If you do not, the address

will be printed in the wrong direction.

(4) Select Envelope in Media Type, and then select DL Env. (Windows) / DL Envelope

(Macintosh) or Comm. Env. #10 (Windows) / #10 Envelope (Macintosh) in Page

Size.

For a detailed description of the printer driver settings, refer to “Printing with

Windows” on page 18, or “Printing with Macintosh” on page 21.

When printing starts, the printer may not detect the envelope

correctly depending on the type of envelope. If the ALARM lamp

flashes orange eleven times, refer to “Error Regarding the Width of

Paper” on page 78 to set the printer driver not to detect the width

of the paper.

Fold the envelope flap shut.

(2) Pinch the

Paper Guide

and slide it

against the

left side of

the envelope.

(1) Load the envelope

and align it with the

right edge of the Auto

Sheet Feeder with the

front face UP, and the

rear flaps DOWN on

the left.

A maximum of

10 envelopes

can be loaded at

once.

(3) Ensure that the FRONT FEED button is not lit.

If the FRONT FEED button is lit or flashing, set

the Front Tray to its normal printing position.

See “Returning the Front Tray to Its Normal

Printing Position” on page 14.

Printing direction