Photo Printer Quick Start Guide

Basic Printing
18
Printing with Windows
z Menu and command names may differ between software applications, and
more steps may be required. For details, refer to the documentation for each
software application you use.
z The steps described in this section are for printing in Windows
®
XP Service
Pack 2 (hereafter, called Windows XP SP2).
z You can use Easy-PhotoPrint or Easy-PhotoPrint Pro to easily do print
operations when printing photographs. Easy-PhotoPrint and Easy-PhotoPrint
Pro are provided on the
Setup CD-ROM . For details on how to use Easy-
PhotoPrint and Easy-PhotoPrint Pro, refer to the
Photo Application Guide .
1 Turn on the printer.
See “Turning on the Printer” on page 2.
2 Load the paper in the printer.
See “Loading Paper in the Auto Sheet Feeder” on page 5 or “Loading Paper in the
Front Tray” on page 10.
3 Create a document or open a file to print.
When printing in grayscale, we recommend printing with the top and
bottom margins of the paper set to more than 45 mm / 1.77 inches.
Depending on an image, without these margins, the printing troubles
may occur on the top and/or bottom edges of the paper such as uneven
coloration or white streaks, and the print quality may be degraded. In this
case, print the image using the Easy-PhotoPrint Pro provided on the
Setup CD-ROM . Or, prepare paper whose longer side is at least 90 mm /
3.54 inches longer than the length of the image, then print it with the top
and bottom margins of the paper set to 45 mm / 1.77 inches using your
page layout software. For details on how to use the Easy-PhotoPrint Pro,
refer to the
Photo Application Guide .