Photo Printer Quick Start Guide

Basic Printing

 Loading Paper in the Auto Sheet Feeder

For detailed information on the Canon genuine media for use with its

various printers, refer to “Using Specialty Media” on page 15, or

“Printing Media” in the

User’s Guide

1 Flatten the four corners of the paper before loading it.

z When paper is curled, gently bend it in the opposite direction of the curl

(without curling the reverse side) and then load the paper. For details on

how to flatten paper curl, refer to “Media is curled” on page 68.

z To prevent paper from being curled, we recommend handling it in the

following ways:

- Put unused paper back into the package, and store them

horizontally.

- Remove only as many sheets from the package as you need right

before printing.

2 Prepare to load paper.

(1) 1 Open the Paper Support.

2 Open the Paper Support

Extension to support the paper.

(2) 1 Gently press the mark on

the Front Tray.

2 Pull out the Front Tray Extension

completely.

(3) Ensure that the FRONT FEED button is

not lit.

If the FRONT FEED button is lit or

flashing, set the Front Tray to its

normal printing position.

See “Returning the Front Tray to Its

Normal Printing Position” on page 14.