ENGLISH DIGITAL CAMERA XXXXXX © 2004 CANON INC. PRINTED IN JAPAN Camera User Guide CDI-E175-010 Camera User Guide z Please read the Read This First section (p. 4). z Please also see the Software Starter Guide and the Direct Print User Guide.
Disclaimer • While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. • Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice.
Flowchart and Reference Guides This Guide Shooting with the Camera Software Starter Guide Installing the Software Symbols Used Icons under title bars show the available shooting modes. As in the example below, the shooting mode dial should be set to , , , , , or . , , , , , Using the Flash Mode Dial This Guide Connecting the Camera to a Computer This Guide Software Starter Guide Downloading Images to a Computer This mark denotes issues that may affect the camera’s operation.
Table of Contents Items marked with are lists or charts that summarize camera functions or procedures. Read This First 4 Please Read ......................................................4 Safety Precautions ............................................6 Preventing Malfunctions ..................................11 Components Guide 12 Preparing the Camera 15 Installing the Batteries .....................................15 Installing the Memory Card .............................18 Formatting Memory Cards ...
Table of Contents Setting the Shutter Speed ..................77 Setting the Aperture ...........................79 Manually Setting the Shutter Speed and Aperture ..80 Switching between Focusing Modes ...............81 Switching between Metering Modes................82 Adjusting the Exposure ...................................83 Adjusting the Tone (White Balance) ................84 Changing the ISO Speed ................................87 Changing the Photo Effect ..............................
Read This First Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc.
Read This First Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.
Read This First Safety Precautions z Before using the camera, please ensure that you read and understand the safety precautions described below. Always ensure that the camera is operated correctly. z The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment.
Read This First z Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide. Disassembly or alteration may result in high-voltage electrical shock. Internal inspections, alterations and repairs should be conducted by qualified service personnel authorized by your camera distributor or a Canon Customer Support Help Desk. z To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if it has been damaged.
Read This First z Remove the power cord on a regular periodic basis and wipe away the dust and dirt that collects on the plug, the exterior of the power outlet and the surrounding area. In dusty, humid or greasy environments, the dust that collects around the plug over long periods of time may become saturated with humidity and short-circuit, leading to fire. z Do not cut, damage, alter or place heavy items on the power cord.
Read This First z Before you discard a battery, cover the terminals with tape or other insulators to prevent direct contact with other objects. Contact with the metallic components of other materials in waste containers may lead to fire or explosions. Discard the batteries in specialized waste facilities if available in your area. z Use only recommended batteries and accessories.
Read This First CAUTIONS z Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing. Ensure that there is good ventilation when using the battery charger to charge the batteries.
Read This First Preventing Malfunctions Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. Avoid Condensation Related Problems Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces.
Components Guide Shooting Mode Dial (p. 14) Speaker Power Button (p. 30) Power Lamp (p. 14) Shutter Button (p. 33) AF-assist Beam (p. 36) Red-eye Reduction Lamp (p. 43) Self-timer Lamp (p. 45) Viewfinder Window (p. 35) Zoom Lever (p. 33, 47, 59, 61) Flash (p. 42) Microphone A/V (Audio/Video) Out Terminal (p. 114) Ring DIGITAL Terminal (p. 109) Ring Release Button DC IN Terminal (p. 131) Lens Terminal Cover The following cables are used to connect the camera to a computer or printer.
Components Guide SET Button Mode Switch (p. 32) (Flash)/ Strap Mount Button (p. 42) Attaching the wrist strap*1 Preparing the Camera, Basic Function Viewfinder (p. 35) Indicators (p. 14) Button LCD Monitor*2 (p. 24) (Print/Share) Button (p. 98, 111) Tripod Socket MENU Button (p. 67) FUNC. (Function)/ (Single Image Erase) Button (p. 65, 66) Button (Macro)/ MF (Manual Focus)/ Button (p. 44, 91) Battery Cover (p. 15) Battery Cover Lock (p. 15) Memory Card Slot Cover (p. 18) DISP. (Display) Button (p.
Components Guide Shooting Mode Dial Creative Zone Use the shooting mode dial to switch between the Shooting modes. Auto z : Auto (p. 33) The camera automatically selects settings. Image Zone z Image Zone The camera automatically selects settings according to the image composition type. : Portrait (p. 38) : Landscape (p. 38) : Night Scene (p. 38) : Fast Shutter (p. 38) : Slow Shutter (p. 38) : Special Scene (p. 38, 51) : Movie (p. 56) : Stitch Assist (p.
Preparing the Camera Installing the Batteries 1 Be sure that the camera power is off. 2 Slide the battery cover lock in the direction of the arrow, and open the cover. 3 Insert the batteries as shown. Positive end (+) 4 When the upper indicator blinks green, do not turn off the power or open the battery cover. The camera is writing, reading, erasing or transmitting an image to or from the memory card.
Preparing the Camera Proper Battery Handling z Use AA-size alkaline or Canon AA-size NiMH batteries (sold separately) only. For information on handling the AA-size rechargeable NiMH batteries, see Using Rechargeable Batteries (p. 129). z Since the performance of alkaline batteries may differ according to brand, the operating time of the batteries you purchase may not be as long as the batteries that came with the camera.
Preparing the Camera WARNING Never use batteries that look like this. Batteries with all or part of the seal (electrical insulation sheath) peeled off. The positive electrode (plus terminal) is flat. The LCD monitor displays an icon or message to let you know when batteries are low or depleted. Change the batteries Batteries are beginning to run low. Replace or recharge the batteries if you wish to continue using the camera.
Preparing the Camera Installing the Memory Card 1 Be sure that the camera is turned off. 2 Slide the memory card slot cover in the direction of the arrow, and open it. 3 Insert the memory card. z Push the memory card in until it clicks into place. z Do not touch or allow metal objects to contact the terminals on the back of the memory card. 18 To remove the memory card Push the memory card until it clicks and then release it. 4 Close the memory card slot cover securely.
Preparing the Camera Formatting Memory Cards You should always format a new memory card or one from which you wish to erase all images and other data. Please note that formatting (initializing) a memory card erases all data, including protected images and other data types. Please check the contents of the memory card before formatting it. 1 2 Turn the power on (p. 30). Press the MENU button and select the [ (Set up)] menu using the button.
Preparing the Camera 3 Select (Format) using the or button and press the SET button. 4 Select [OK] using the or button and press the SET button. z To cancel formatting instead, select [Cancel] and press the SET button. z The capacity of the memory card displayed on the LCD monitor when formatting is less than the rated capacity of the memory card. This is not a malfunction of the memory card or camera. 5 20 Press the MENU button.
Preparing the Camera Memory Card Handling Precautions different temperature zone and allow it to adjust slowly to the new temperature. z If condensation forms on the memory card, store it at room temperature until the water droplets have evaporated naturally. z Do not use or store memory cards in the following locations.
Preparing the Camera Setting the Date/Time The Set Date/Time menu will appear the first time the camera power is turned on, or whenever the lithium date battery charge is low. Start from Step 4 to set the date and time. 1 2 3 22 Turn the power on (p. 30). Press the MENU button and select the [ (Set up)] menu using the button. Press the or button to select (Date/Time), and then press the SET button. 4 Set the date and time. z Press the or button to select the item you wish to set.
Preparing the Camera Setting the Language 4 1 2 3 Turn the power on (p. 30). Press the MENU button and select the [ (Set up)] menu using the button. Select (Language) using the or button and press the SET button. z The Set up menu will reappear without changing the language setting if you press the MENU button instead of the SET button. 5 Press the MENU button. Shortcut Operation The Language menu can also be displayed in Playback mode by holding down the SET button and pressing the MENU button.
Preparing the Camera Using the LCD Monitor The LCD monitor can be used to compose images while shooting, adjust menu settings and play back recorded images. Pressing the DISP. button switches the LCD monitor display mode. Shooting Mode DISP. Button Standard (No Information) Detailed (Information View) AF Frame Spot AE Point Frame Aperture Value Shutter Speed DISP. Button DISP.
Preparing the Camera Icons Displayed in Shooting Mode Shooting Mode Resolution Postcard Print z(Red) p. 83 p. 84 p. 45, 48 p. 87 p. 88 p. 82 p. 40 p. 40, 54 Flash p. 42 Red-eye Reduction p. 43 Macro Mode p. 44 Manual Focus p. 91 Auto Rotate p. 92 Function Movie Recording p. 56 Mode p. 47 p. 26 p. 17 *1: Each mode of the SCN mode icon appears (p. 51). *2: Zoom powers reflect the combined optical and digital zoom effects. These figures appear when the digital zoom is activated.
Preparing the Camera z A slow shutter speed has likely been selected because of insufficient lighting if the upper indicator blinks orange after the metering preparations are complete and the camera shake icon ( ) displays in the LCD monitor. Set the flash to or , or affix the camera to a tripod to shoot.
Preparing the Camera Playback Mode Standard File Number Histogram No Display Detailed* Shooting Date/Time Displayed image number Total number of images Aperture Value Shutter Speed DISP. Button Compression Resolution (Still image) Sound memo (WAVE file) Movie Protection Status p. 40 p. 40 p. 95 p. 56 p. 97 Movie Length * Detailed Display is not available in Index Playback (9 images). 27 Preparing the Camera, Basic Function DISP. Button DISP.
Preparing the Camera Icons Displayed in Playback Mode (Detailed Display) *1 *2 Shooting Mode Exposure Compensation White Balance Photo Effect ISO Speed Flash Macro Mode Manual Focus Metering Mode Resolution (Movies) Low Battery p. 38, 76 p. 83 p. 84 p. 88 p. 87 p. 42 p. 44 p. 91 p. 82 p. 40 p. 17 In addition to the above, the shutter speed, aperture value, histogram and recorded movie time are displayed as in the example in the figure on page 27. *1: Each mode of the SCN mode icon appears (p. 51).
Preparing the Camera Preparing the Camera, Basic Function z Please note that image information recorded by this camera may not display correctly on other cameras and image information recorded by other cameras may not display correctly on this camera. About the Histogram z The histogram is a graph that allows you to judge the brightness of the shot image. The greater the bias toward the left in the graph, the darker the image. The greater the bias toward to the right, the brighter the image.
Basic Functions Turning the Power On/Off Turning the Camera Off Turning the Camera On 1 1 Press the Power button until the power lamp lights green (p. 14). Shooting Mode z Current shooting settings will appear in the LCD monitor. Current shooting settings will disappear in approximately 6 seconds when the LCD monitor is set to Standard (No Information) or Off (p. 24). Playback Mode z The LCD monitor displays an image. 30 Press the Power button again to turn the power off.
Basic Functions Power Saving Function z Auto Power Down [On]: Shooting mode: Powers down approximately 3 minutes after the last time a camera control is accessed. Playback mode: Powers down approximately 5 minutes after the last time a camera control is accessed. Connected to a Printer: Powers down approximately 5 minutes after the last time a camera control is accessed. When the Auto Power Down Function Activates Pressing the Power button again will restore power.
Basic Functions Switching between Shooting and Playback You can quickly switch between Shooting mode and Playback mode. This is convenient when you wish to shoot again after checking or erasing an image immediately after it is shot. Shooting Mode Playback Mode The lens does not retract for approximately 1 minute after the camera switches to Playback mode. 32 Shooting Mode z Slide the mode switch to . Playback Mode z Slide the mode switch to .
Shooting – The Basics See Functions Available in Each Shooting Mode (p. 159) at the end of this manual to find out which settings can be changed in which Shooting modes. 4 Use the zoom lever to achieve the desired composition (relative subject size in the viewfinder). Mode Dial : Decreases the size of the subject (Wide angle) In this mode, all you have to do is press the shutter button and let the camera do everything else. 1 Check that the camera is in Shooting mode (p. 32).
Shooting – The Basics Pressing Halfway Pressing halfway automatically sets the exposure and focus. z Two beeps will sound when the camera has finished metering, and the upper indicator will light green or orange. If the LCD monitor is on, the AF frame will appear green. z The lower indicator will blink yellow and the beep will sound one time if the subject is difficult to focus on. 6 Press the shutter button all the way. Pressing Fully Pressing fully releases the shutter.
Shooting – The Basics Shooting with the Viewfinder You can save power by turning the LCD monitor off (p. 24) and using the viewfinder to shoot. 1 Viewfinder window Shows approximate center of the image 35 The Basics Compose the image so that the subject appears in the center of the frame in the viewfinder (autofocus range).
Shooting – The Basics AF-assist Beam z The AF-assist beam will sometimes emit when the shutter button is pressed halfway to assist focusing in certain conditions, i.e. dark conditions. z The AF-assist beam can be turned off (p. 69). For example, if animals are your subject, turn off the beam when shooting in the dark to avoid startling them. However, please keep in mind the following facts. - If the AF-assist beam is turned off, it may become more difficult for the camera to focus in dark conditions.
Shooting – The Basics Changing the Image Display Duration z Another shot can be taken by pressing the shutter button even while an image is displayed. The image review time can be set to [Off], any time in the range of 3 to 10 seconds, or [Hold]. 1 Press the MENU button. The Basics z The [ (Rec.)] menu appears. 2 Select (Review) using the or button. 3 Select a duration setting using the or button and press the MENU button. z With the [Off] option, the image will not display. z With the [3 sec.
Shooting – The Basics Using the Mode Dial (Image Zone) Settings fitting the shooting conditions of your subject can easily be set using the shooting mode dial. Portrait Movie Stitch Assist Special Scene Use this mode to shoot movies. Sound is also recorded simultaneously (p. 56). Use this mode when taking shots that you want to combine into a panorama (p. 49). Use this mode when you want the subject to appear sharp and the background to blur. Landscape Use this mode to shoot landscape scenes.
Shooting – The Basics 1 Turn the shooting mode dial and set the icon of the mode you wish to use to . and Shooting Modes Always use a tripod to prevent camera shake. z See page 159 for settings that can be changed in each mode. z Tips for each function: Portrait Mode • You can achieve a better blurring effect of the background by making sure the upper half of your subject fills the entire LCD monitor or viewfinder.
Shooting – The Basics Changing the Resolution and Compression or z The resolution is set to M1 (1600 x 1200) and the (Postcard compression is set to (Fine). Print Mode) z See page 54 for Postcard Print mode information. * Mode Dial * The Postcard Print mode is not available in and * * Paper sizes vary according to region. Compression . You can change the resolution and compression (excluding movies) depending on the purpose.
Shooting – The Basics 2 5 Select L* using the or button. * The current setting is displayed. 3 Select the resolution you wish to set using the or button. Excluding z You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot. 6 Press the FUNC. button. z Image Data Size (Estimated) (p. 146) z Memory Cards and Estimated Capacities (Recordable Images) (p.
Shooting – The Basics z You can switch between settings by pressing the button. Using the Flash * Mode Dial * In When the red-eye reduction function is on (Fireworks), the flash is prohibited. Use the flash according to the guidelines below. Auto with red-eye reduction Auto The flash fires automatically as required by the lighting level, and the red-eye reduction lamp fires each time the main flash fires. The flash fires automatically as required by the lighting level.
Shooting – The Basics z The flash setting is saved when the camera is turned off in the P, Tv, Av and M Shooting modes. Setting the Red-eye Reduction Function The red-eye reduction lamp fires when the flash is used in dark areas. This reduces light reflecting back from the eyes and making them appear red. 1 z In the [ (Rec.)] menu, set (Redeye) to [On]. appears on the LCD monitor. 43 The Basics z When shooting in any mode other than M mode, the flash fires with automatic adjustments.
Shooting – The Basics z Red-eye Reduction For this mode to be effective, the subject must be looking right at the red-eye reduction lamp. Try asking them to look directly at the lamp. Even better results can be obtained by shooting with the lens set to a wide angle, increasing the lighting in indoor settings or approaching closer to the subject. z The red-eye reduction function cannot be set when the Special Scene mode (p. 51) is set to (Fireworks). Macro Mode * Macro mode is not available in and .
Shooting – The Basics z The lower indicator will light yellow when the shutter button is pressed halfway. z Shooting procedures are the same as for the Mode (p. 33). *1 Closest focal distance. *2 Maximum optical telephoto setting. Mode Dial * The 1 cannot be set in and modes. Press the FUNC. button and select *(Drive Mode) using the or button. The Basics z Always use the LCD monitor to compose images in macro mode.
Shooting – The Basics z When is selected, pressing the SET button will allow you to set the start time (0 to 10 seconds) and the number of shots (1 to 10 shots). Select the setting item using the or button and change its value using the or button. 3 Shoot the image. z When is selected, the self-timer lamp starts blinking when the shutter button is pressed all the way. The self-timer sounds and the blinking gets faster two seconds before the shutter activates.
Shooting – The Basics Digital Zoom Mode Dial Images can be zoomed with the combined optical and digital zoom functions as follows. 1 Press the DISP. button to turn the LCD monitor on. 2 In the [ (Rec.)] menu, select (Digital Zoom). z See Selecting Menus and Settings (p. 66). 3 Select [On] using the or button and press the MENU button. Press the zoom lever toward . z The lens will zoom to the maximum optical telephoto setting and stop.
Shooting – The Basics Continuous Shooting Mode Dial Use this mode to shoot successive shots while the shutter button is pressed. z Continuous shooting speed is as follows*. PowerShot A520: Approx. 1.9 shots per second PowerShot A510: Approx. 2.3 shots per second * Large/Fine mode with LCD monitor off (These figures reflect Canon’s testing standard. The figures will vary depending on the subject and shooting conditions.) 1 2 Press the FUNC. button. Select *(Drive Mode) using the or button.
Shooting – The Basics Shooting Panoramic Images (Stitch Assist) Mode Dial To merge the images on a computer, use PhotoStitch, one of the supplied software programs. The PhotoStitch program detects the overlapping portions of adjoining images and merges them. When shooting, try to include a distinctive item (landmark) in the overlapping portions. The Basics Stitch Assist can be used to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer.
Shooting – The Basics z To shoot landscapes, swivel (pan) the camera around its own vertical axis. z To shoot close-ups, slide the camera over the subject, keeping it parallel to the subject as you move it. z You can also press the shutter button directly to shoot without pressing the SET button. 3 4 Shooting Images can be shot in the following 2 sequences in Stitch Assist mode. Left Left 1 Right Right Left to right horizontally Right to left horizontally Turn the Shooting mode dial to .
Shooting – The Basics See page 159 for settings that can be changed in this mode. Special Scene Mode Mode Dial By simply selecting one of the following 8 modes, you can shoot the image with the most appropriate settings for the scene. Appropriate for shooting images with flowers, leaves or trees to enhance color. Appropriate for shooting the subject against the backdrop of snowy Snow mountains while preventing dark subjects and bluish backgrounds.
Shooting – The Basics Prevents camera shake and maintains the subject’s true color when shooting under fluorescent or Indoor tungsten lighting. The exposure is regulated so as to avoid the use of flash as much as possible. Allows you to capture subjects that move around, such as children and Kids & Pets pets, without missing photo opportunities. Use this to take snapshots of people Night against twilight or night backgrounds Snapshot to reduce the effects of camera shake even without using a tripod.
Shooting – The Basics Snow Beach Fireworks Night Snapshot Kids & Pets Indoor Underwater z In mode, the shutter speed slows down. Use a tripod to avoid camera shake. z In , , and modes, the ISO speed may increase and cause noise in the image. z In mode, shoot subjects in the following range: 1 to 5 m (3.3 to 16 ft.) (telephoto end) or 1 m (3.3 ft.) – infinity (other zooming positions). z See page 159 for settings that can be changed in this mode. z In mode, using the LCD monitor is recommended.
Shooting – The Basics Postcard Print Mode Mode Dial You can shoot images with the optimal resolution and compression for postcard size printing. • When printing standard image data to postcard size, sometimes the top and bottom sides may not get printed. • By shooting images in the Postcard Print mode, you can check the printing area (vertical/horizontal ratio of 3:2) beforehand.
Shooting – The Basics Embedding the Date in the Image Data 1 Check that monitor. 2 Select (Date Stamp) in the [ (Rec.)] menu. appears on the LCD 4 5 Press the MENU button. Shoot the image. z Shooting procedures are the same as for the mode (p. 33). z The Date Stamp cannot be deleted from the image data once it has been set. z When using a Compact Photo printer (SELPHY CP series) or Card Photo printer, a portion of the date may not get printed if the credit card size print (54 mm x 86 mm (2.1 x 3.
Shooting – The Basics Movie Mode The maximum length of individual movie clips may vary with the subject and shooting conditions. Recording will automatically stop when the maximum is reached or when the memory cards runs out of free capacity. Mode Dial Use this mode to shoot movies. The resolution can be set to [ (640 x 480)], [ (320 x 240)] or [ (160 x 120)] (p. 40). 1 Turn the shooting mode dial to . z The LCD monitor turns on and displays the maximum recording time (in seconds).
Shooting – The Basics z See page 159 for settings that can be changed in this mode. z Sound is recorded monaurally. z There is no shutter sound in movie mode. z QuickTime 3.0 or higher is required to playback movies (File type: AVI/ Compression method: Motion JPEG) on a computer. (QuickTime (for Windows) is bundled on the supplied Canon Digital Camera Solution Disk. On the Macintosh platform, QuickTime 3.0 or later is generally bundled with Mac OS 8.5 or later operating system.
Playback – The Basics Displaying Images Individually (Single Image Playback) You can view the recorded images on the LCD monitor. 1 Slide the mode switch to . z The last recorded image appears (single image playback). 2 Move between images using the or button. z Use the button to move to the previous image and the button to move to the next. Holding the or button moves more rapidly between the images, but the images will not appear as clearly.
Playback – The Basics Magnifying Images Canceling the Magnified Display Images can be magnified up to approximately 10 times in single image playback. Slide the mode switch to . Press the zoom lever toward . Approximate position Press the zoom lever toward . z Pressing the MENU button cancels magnification immediately. The Basics 1 2 1 Movie frames and index playback images cannot be magnified.
Playback – The Basics 4 Viewing Images in Sets of Nine (Index Playback) Up to 9 images can be viewed at once in index playback. 1 2 Slide the mode switch to . z 9 images appear at once (index playback). 3 Change the image selection using the , , or button. Pressing the button in this row displays the previous set of 9 images. Selected Image Movie 60 Pressing the button in this row displays the next set of 9 images. . Press the DISP. button to show the information for the displayed image (p.
Playback – The Basics Jumping between Images Viewing/Editing Movies The display can be advanced or set back 9 images in index playback. Viewing Movies 1 You can playback the movies shot in 1 3 2 Change the image selection. z Jump 9 images back or forward using the or button. z Pressing the or button while holding the SET button displays the first set or last set of 9 images. . z Movies cannot be viewed in index playback. z The jump bar appears. 2 Slide the mode switch to mode.
Playback – The Basics z When a movie has finished playing, it will display the last frame. If the SET button is pressed in this state, the camera will revert to the movie playback panel. If the SET button is pressed again, the movie will start playing from the first frame. You may experience frame dropping and audio breakup when playing back a movie on a computer with insufficient system resources. z The volume at which movies play back can also be adjusted in the Set up menu (p. 71). z If [Mute] (p.
Playback – The Basics 3 Select an editing method using the or button. Movie Editing Panel 6 z 4 5 z When is selected, the edited movie is not saved and the camera reverts to the movie playback panel. Movie Editing Bar Select the range you wish to delete using the or button. Select (Play) using the or button and press the SET button. z The temporarily edited movie will start playing. z The movie will stop if you press the SET button while it is playing.
Playback – The Basics z Protected movies and movies with an original length of less than one second cannot be edited (p. 97). z It may take approximately 3 minutes to save an edited movie. If the battery runs out partway through, edited movie clips cannot be saved. When editing movies, it is recommended to use new AA size alkaline batteries or fully charged AA-size NiMH batteries (sold separately), or the AC Adapter Kit ACK800 (sold separately) (p. 131).
Erasing Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Erasing All Images 1 Erasing Images Individually Slide the mode switch to . Select the image you wish to erase using the or button and press the button. z A confirmation screen appears. 3 Select [Erase] using the or button and press the SET button. z To cancel instead of erasing, select [Cancel] and press the SET button. z A confirmation screen appears.
Shooting – Advanced Functions Selecting Menus and Settings Selecting Settings with the FUNC. Button (Shooting Mode Only) 3. Select a FUNC. menu item using the 4. Select the setting contents using the 1. 2. or or button. button. Exposure Compensation (±0) (p. 83) Flash Output (p. 89) Resolution ( White Balance( 1 2 3 Slide the mode switch to Drive Mode ( Use the or button to select a FUNC. menu item. ISO Speed ( 4 Use the or button to select the setting contents.
Shooting – Advanced Functions Selecting Settings with the MENU Button 1 2 Press the MENU button. Use the menus. or button to switch between z You can also switch between menus using the zoom lever. Rec. Menu Playback Mode 3 4 Use the 5 Press the MENU button. Play Menu or Use the or contents. button to select a menu item. button to select the setting Set up Menu My Camera Menu z For items with [...] next to them, press the SET button and select the settings from the next displayed menu.
Shooting – Advanced Functions z Some menu items may not be available for selection according to the Shooting mode (p. 159). z You can apply a desired image and sound to and in the My Camera menu. For details, see the Registering My Camera Settings (p. 118) or the Software Starter Guide. z The default of all the settings changed by the menu and button operations except for [Date/Time], [Language] and [Video System] can be restored all at once (p. 75).
Shooting – Advanced Functions Menu Settings and Default Settings Rec. Menu Menu Item Setting Content 81 43 Advanced Functions Sets the camera so that it will either automatically select the AF frame and shoot, or shoot with the AF frame fixed in the center. • On*/Off Sets whether or not the red-eye reduction lamp fires when the flash fires. Red-eye • On*/Off Sets whether or not the focusing point is magnified when using the manual MF-Point Zoom focus.
Shooting – Advanced Functions Play Menu Menu Item Protect Rotate Sound Memo Erase All Auto Play Print Order Transfer Order Setting Content Protects images from accidental erasure. Rotates images 90 or 270 degrees clockwise in the display. Adds sound memos to images. Erases all images from a memory card (excluding protected images). Plays images automatically one after the other. Sets which images and how many copies will be printed on a printer with the direct print function or at a photo lab service.
Shooting – Advanced Functions Menu Item Setting Content Adjusts the volume of the start-up sound, operation sound, self-timer sound, shutter sound, or playback sound after pressing the SET button. The volume cannot be adjusted if [Mute] is set to [On]. • (OFF) • (2)* • (4) • (1) • (3) • (5) – 30 Advanced Functions Volume Start-up Vol. Adjusts the Start-up Sound volume when the camera powers up. Operation Vol. Adjusts the Operation Sound volume when any button except the shutter button is operated.
Shooting – Advanced Functions Menu Item Power Saving Date/Time Format File No. Reset Auto Rotate Distance Units * Default setting 72 Setting Content The [Auto Power Down] and [Display Off] settings can be set by pressing the SET button. Auto Power Down Sets whether or not the camera automatically powers down after a specified period of time elapses without camera operation. • On* /Off Display Off Specifies a period of time before the LCD monitor turns off when no camera operation is performed.
Shooting – Advanced Functions Menu Item Setting Content Reference Page Sets the language used in the menus and messages on the LCD monitor.
Shooting – Advanced Functions Customizing the Camera (My Camera Settings) You can select the theme, start-up image and sound, operation sound, self-timer sound and shutter sound used on this camera. These are called My Camera settings. You can also customize the and options for each item with images recorded on the memory card and newly recorded sounds or by using the supplied software. See the Software Starter Guide for details.
Shooting – Advanced Functions Resetting the Settings to Default You can reset the menu and button operation settings to default. 1 Turn the power on. z Can be performed from Shooting or Playback mode. 2 Advanced Functions Press the MENU button for longer than 5 seconds. z The following settings do not reset to default. - [Date/Time], [Language] and [Video System] in the [ (Set up)] menu (p. 72, 73) - The custom white balance (p. 85) - Newly registered My Camera settings (p.
Shooting – Advanced Functions Using the Mode Dial (Creative Zone) Mode Dial You can freely select camera settings such as the shutter speed and aperture value to suit your shooting purposes. After settings are made, shooting procedures are the same as for the mode (p. 33). z If the LCD monitor is on, the shutter speed and aperture value appear automatically. z The camera operates in the following ways according to the selected function: selects a shutter speed using the Tv Theoruserbutton.
Shooting – Advanced Functions Program AE Use the program AE mode to have the camera automatically set the shutter speed and aperture value to match the brightness of the scene. Differences between the P and Modes. z The following settings can be adjusted in P mode, but not in mode.
Shooting – Advanced Functions z Please note that camera shake becomes a factor at slow shutter speeds. If the camera shake warning appears on the LCD monitor, secure the camera to a tripod before shooting. z The aperture value and shutter speed change according to the zoom state as follows. Aperture Value Wide Angle Telephoto F2.6 – 3.5 F4.0 – 8.0 F5.5 – 7.1 F8.
Shooting – Advanced Functions Setting the Aperture z If the shutter speed shows in red on the LCD monitor, the image is underexposed (insufficient light) or overexposed (too much light). Adjust the aperture value using the or button until the shutter speed display turns to white. z Some aperture values may not be available with certain zoom positions (p. 78). z Please note that camera shake becomes a factor with larger aperture values that slow down shutter speeds.
Shooting – Advanced Functions Manually Setting the Shutter Speed and Aperture You can manually set the shutter speed and aperture to shoot images. You can select settings such as a long exposure to suit your purpose. z When you press the shutter button halfway, the difference between the standard exposure* and the selected exposure appears on the LCD monitor. If the difference is more than ±2 stops, “–2” or “+2” appears in red.
Shooting – Advanced Functions Switching between Focusing Modes Mode Dial You can change the autofocus frame (AF frame) selection method. The AF frame will appear when the LCD monitor is turned on (p. 24). Select [On] or [Off] using the or button. z After selecting an option, you can immediately shoot the image by pressing the shutter button. 3 Press the MENU button. z The AF frame is set to center-point when using the digital zoom.
Shooting – Advanced Functions Switching between Metering Modes Mode Dial Evaluative Centerweighted Averaging Spot 82 Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for light metering. It evaluates the complex lighting conditions, such as the position of the subject, the brightness, the background, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject.
Shooting – Advanced Functions Adjusting the Exposure Mode Dial Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background, or to avoid making lights appear too bright in night shots. Select *(+/– (Exp.)) in the FUNC. menu. 3 Press the FUNC. button. z To reset the exposure compensation, return the setting to 0 using the or button.
Shooting – Advanced Functions Adjusting the Tone (White Balance) Fluorescent H Mode Dial When the white balance is set to match the light source, the camera reproduces colors more accurately. Combinations of setting contents and light source are as follows.
Shooting – Advanced Functions 3 Press the FUNC. button. The white balance cannot be adjusted when the photo effect is set to (Sepia) or (B/ W) (p. 88). 1 * The current setting is displayed. 2 Select (Custom) using the button. 3 Aim the camera at a piece of white paper or cloth, or gray card and press the SET button. or z Aim the camera so that the white paper or cloth, or gray card, completely fills the frame at the center of the LCD monitor or completely fills the viewfinder.
Shooting – Advanced Functions z You are recommended to set the white balance when shooting in the following conditions. - The shooting mode dial is set to P and the exposure compensation is set to ±0. The correct white balance may not be obtained when the exposure is incorrect (image is completely black or white). - The zoom is positioned to the telephoto end setting. Set the digital zoom to [Off]. - The flash is set to (Flash On) or (Flash Off).
Shooting – Advanced Functions Changing the ISO Speed Mode Dial By raising the ISO speed, you can shoot bright images even in poor lighting conditions. This function is convenient when you want to prevent camera shake, shoot without the flash or shoot with a faster shutter speed in dark conditions. Select *(ISO Speed) in the FUNC. menu. z You can easily shoot images in dark places such as indoor settings by using the (Indoor (p. 52)) option of the SCN mode. z See Photo Tips and Information (p. 152).
Shooting – Advanced Functions Changing the Photo Effect Mode Dial You can shoot with different saturation and contrast color effects. Effect Off Vivid Neutral Low Sharpening Sepia B/W 1 Records normally with this setting. Emphasizes the contrast and color saturation to record in bold color. Tones down the contrast and color saturation to record neutral hues. Records subjects with softened outlines. Records in sepia tones. Records in black and white. Select *(Effect Off) in the FUNC. menu.
Shooting – Advanced Functions Adjusting the Flash Output Mode Dial In M mode, the flash output can be controlled in three steps when shooting. 1 Select (Flash Output) in the FUNC. menu. When the flash output is low, less shadow appears in the image. However, when shooting a wide scene or area, the image will likely be darker due to insufficient light. When adjusting the flash output, consider all the shooting conditions, including the distance to the subject.
Shooting – Advanced Functions Shooting Hard-to-Focus Subjects Mode Dial The autofocus may not work well on the following types of subjects. z Subjects with extremely low contrast to the surroundings z Subjects mixing close and far objects z Subjects with extremely bright objects at the center of the composition z Subjects that are moving quickly z When shooting through glass, get as close as possible to avoid reflection off the glass.
Shooting – Advanced Functions z The focus will stay looked even if the shutter button and the MF button are released. z Pressing the MF button again cancels the AF lock setting. 2 Recompose the image and press the shutter button all the way to shoot the image. and z When shooting with focus lock, you can lock the focus to the subject in the center AF frame by setting to [Off] in the [ (Rec.)] menu beforehand.
Shooting – Advanced Functions 2 Focus using the or and shoot the image. button z Adjust the focus using the or button until the image appears focused on the LCD monitor. z Pressing the MF button again cancels the manual focus mode. z You can use manual focus in the macro focal distance 5 to 45 cm (2.0 in. to 1.5 ft.) at wide angle end and 30 to 45 cm (11.8 in. to 1.5 ft.) at telephoto end. In this case, the scale of the MF indicator will be changed.
Shooting – Advanced Functions z This function may not operate correctly when the camera is pointed straight up or down. Check that the arrow is pointing in the right direction and if it is not, then set the Auto Rotate function to [Off]. z Even if the Auto Rotate function is set to [On], the orientation of images downloaded to a computer will depend upon the software used to download the images.
Playback – Advanced Functions Rotating Images in the Display You can rotate an image by 90° or 270° clockwise in the LCD monitor. (Original) 1 90° 270° In the [ (Play)] menu, select (Rotate) and press the SET button. z See Selecting Menus and Settings (p. 66). 2 Press the or button to select the image to be rotated and press the SET button. z The image cycles to the next orientation (90° J 270° J original) each time the SET button is pressed. 3 94 Press the MENU button.
Playback – Advanced Functions Attaching Sound Memos to Image In Playback mode (including single image playback and index playback), you can attach sound memos (up to 60 seconds) to an image. The sound data is saved in WAVE format. Select (Sound Memo) in the [ (Play)] menu and press the SET button. z See Selecting Menus and Settings (p. 66). z icon appears. 2 Select the image to which you wish to attach the sound memo using the or button, and press the SET button. z The Sound Memo panel appears.
Playback – Advanced Functions z You cannot attach sound memos to movies. z When the memory card capacity is full, a “Memory card full” message appears and recording will not be possible to that card. z You cannot record or play back sound memos for images that already have an incompatible sound memo attached. If you attempt to record or play such images the “Incompatible WAVE format” message will display. Incompatible sound data can be deleted with this camera.
Playback – Advanced Functions z The display interval may vary for some images. z Movies play for the length of time that they were recorded. z The power saving function is disabled during Auto Play (p. 96). 3 Protecting Images In the [ (Play)] menu, select (Protect) and press the SET button. Press the MENU button. z The display will return to the Play menu. Pressing the MENU button again returns to the playback screen. Please note that formatting (initializing) a memory card (p.
Various Functions About Printing Images shot with this camera can be printed using one of the following methods. z You can easily print images stored in the memory card by connecting the camera to a direct print button. compatible printer*1 with a cable and then pressing the camera’s z You can select images and specify the number of print copies (DPOF*2 Print Settings) with the camera before sending the image (memory card) to a photo developing service.
Various Functions Print settings (DPOF Print Settings) (p. 100) Image Transmission Settings (DPOF Transfer Order) (p. 104) Direct Print Compatible Printers (Canon) Compact Photo Printer Card Photo Printer Bubble Jet Printer Printers that Can Be Used with this Camera Canon Direct Print Compatible Compact Photo printers (SELPHY CP series), Card Photo printers J See the System Map Direct Print Compatible Bubble Jet Printers J For more information, visit your nearest Canon retailer.
Various Functions DPOF Print Settings Selecting Images Singly You can select images on a memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service that supports DPOF, or for printing on a direct print compatible printer. Refer to the Direct Print User Guide for instructions on how to print.
Various Functions z Select an image using the or button and specify the number of copies (up to 99) to be printed using the or button. 4 Selecting All Images on the Memory Card at a Time 1 (Index) Index print selection Press the MENU button. z Returns to the Print Order menu. Pressing the MENU button again returns to the Play menu. Press it again to go back to the Playback screen. In the [ (Play)] menu, select (Print Order) and press the SET button. z See Selecting Menus and Settings (p. 66).
Various Functions 2 Select [Mark all] using the , , or button and press the SET button. 3 Select [OK] using the or button and press the SET button. z The display will return to the Print Order menu. 4 Press the MENU button. z The display returns to the Play menu. Press the MENU button again to go back to the Playback screen. 102 z Images are printed in order from oldest to newest by the shooting date. z A maximum of 998 images can be set.
Various Functions Setting the Print Style 2 Set the print style after selecting the image to print. The following print settings can be selected. Standard Index Print Type Both File No. 1 In the [ (Play)] menu, select (Print Order) and press the SET button. z See Selecting Menus and Settings (p. 66). z Selecting [Reset] will cancel all print settings for the images. 3 Select (Print Type), (Date) or (File No.) using the or button, then select a setting using the or button.
Various Functions 4 Press the MENU button. z Returns to the Print Order menu. Pressing the MENU button again returns to the Play menu. Press it again to go back to the Playback screen. z When [Print Type] is set to [Index], the [Date] and [File No.] cannot be set to [On] at the same time. z Both [Date] and [File No.] can be set to [On] if [Print Type] is set to [Both] or [Standard]. However, the data that can be printed may vary depending on the type of printer you are using.
Various Functions Selecting Images Singly 1 In the [ (Play)] menu, select (Transfer Order) and press the SET button. z See Selecting Menus and Settings (p. 66). 2 Select [Order] using the or button and press the SET button. 3 Select an image using the or button and press the SET button to select and deselect them. z A checkmark displays on selected images. 4 Press the MENU button. z Returns to the Transfer Order menu.Pressing the MENU button again returns to the Play menu.
Various Functions 3 Select [OK] using the or button and press the SET button. z The display returns to the Transfer Order menu. 4 Press the MENU button. z The display returns to the Play menu. Pressing the MENU button again returns to the playback screen. z Images are transferred in order from oldest to newest by the shooting date. z A maximum of 998 images can be selected. 106 Downloading Images to a Computer The following methods can be used to download images recorded by the camera to a computer.
Various Functions Windows Windows Windows Windows 98 SE Me 2000 XP z With this method, you download images using camera button operations after you have installed the appropriate software (the computer settings only need to be adjusted for the first download). See Connecting the Camera to a Computer (p. 107) and Downloading Images by Direct Transfer (p. 111). Mac OS X z With this method, you download images using computer commands without installing any software.
Various Functions z Macintosh OS Computer Model CPU RAM Interface Mac OS X (v10.1.5 – v10.3) The above OS should be pre-installed on computers with built-in USB ports.
Various Functions 1 Install the driver and the software applications bundled on the Canon Digital Camera Solution Disk (first time only). DIGITAL Terminal 1. Open the terminal cover with your finger nail. 2. Hold the USB connector with the side facing the front of the camera and insert it into the DIGITAL terminal securely. z Please see the Software Starter Guide for the installation procedures. z With a Macintosh, it is next necessary to set the ImageBrowser auto start settings.
Various Functions Windows J Proceed to step 5. Macintosh J Refer to the Software Starter Guide and download images. 5 110 Select [Canon CameraWindow] in the event dialog that appears on the computer and click [OK] (first time only). If the events dialog fails to appear, click the [Start] menu, followed by [Programs] or [All Programs], [Canon Utilities], [CameraWindow], and [CameraWindow]. z The following window appears.
Various Functions Transfers and saves to the Using the software and computer to download images: J See the Software Starter Guide. DPOF Trans. computer only the images with Images DPOF Transfer Order settings Using the Camera to Download Images (Direct Transfer Function): J See Downloading Images by Direct Transfer (p. 111). Select & Transfer Wallpaper Downloading Images by Direct Transfer Transfers and saves all images to the computer.
Various Functions All Images/New Images/DPOF Trans. Images 2 Use the or button to select , or and press the button. z The images will download. During downloading, the button blinks blue. When downloading is complete, the display will return to the Direct Transfer menu. z To cancel the transfer, press the SET button. Select & Transfer/Wallpaper 2 Use the or button to select or and press the button (or SET button). 3 Use the or button to select images to download and press the button (or SET button).
Various Functions Connecting the Camera to the Computer to Download Images without Installing the Software 1 Use the supplied interface cable to connect the computer’s USB port to the camera’s DIGITAL terminal. z See steps 2 to 4 on page 109. 2 Follow the onscreen instructions to proceed with downloading. 1 Eject the memory card from the camera and insert it into a memory card reader connected to the computer.
Various Functions Viewing Images on a TV Set 3 You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the supplied AV Cable AVC-DC300. 1 Turn off the camera (p. 30) and the TV. 2 Attach the AV cable to the A/V Out terminal on the camera. Plug the other ends of the AV cable to the VIDEO IN and AUDIO IN jacks on the TV. Yellow Plug to the VIDEO IN Jack Black Plug to the AUDIO IN Jack 4 Turn on the TV and switch it to Video mode.
Various Functions Resetting the File Number The images you shoot are automatically assigned file numbers. You can select how the file number is assigned. The file number is reset to the start (100-0001) each time a new memory card is inserted. New images recorded on memory cards with existing images are assigned the next available number. The file number of the last image to be shot is Off memorized so that images recorded to a new memory card start from the next number.
Various Functions Setting the File Number Reset to [Off] is useful for avoiding file number duplication when images are downloaded to a computer. About File and Folder Numbers Images are assigned file number from 0001 to 9900, and folders are assigned folder numbers from 100 to 998 (Folder numbers cannot contain 99 in the last two digits). Folder numbers cannot contain 99 in the last two digits. 116 Folder File Capacity Each folder usually contains up to 100 images.
Various Functions Customizing the Camera (My Camera Settings) My Camera allows you to customize the start-up image and start-up, operation, selftimer and shutter sounds. Each menu item has three choices. 2 Select the [ (My Camera)] menu pressing the button twice and select a menu item using the or button. 3 Select the contents you wish to set using the or button. 4 Press the MENU button. Example: Start-up image Changing My Camera Settings 1 Press the MENU button. z The [ (Rec.
Various Functions Registering My Camera Settings Images recorded onto the memory card and newly recorded sounds can be added to the camera as My Camera settings. You can also use the supplied software to upload your computer’s images and sounds to the camera. The following menu items can be saved to the camera. z Start-up Image z Start-up Sound z Operation Sound z Self-timer Sound z Shutter Sound Registering the Memory Card Images and Sounds 1 2 Press the MENU button. z The [ (Play)] menu appears.
Various Functions 5 Press the DISP. button. 7 z An image appears. Registering [Start-up Image] 6 7 Select the image you wish to register using the or button. Press the SET button. 6 Select (Record) using the or button and press the SET button. z Select (Exit) to return to the My Camera menu without registering. z Select (Play) to play the recorded sound. 8 Select [OK] using the or button and press the SET button.
Various Functions Data that can be Registered as My Camera Settings My Camera settings should conform to the below data types. However, memory card images shot with this camera can be registered as My Camera settings regardless of the below data types. (excluding sounds recorded as a movie or with the sound memo function (p.
List of Messages The following messages may appear on the LCD monitor. z For messages which may appear when a printer is connected, refer to the Direct Print User Guide. Busy... No memory card Cannot record ! Memory card error Memory card full Card locked ! Naming error ! No image Image too large Incompatible JPEG format Corrupted data You attempted to play back an incompatible JPEG image. You attempted to play back an image with corrupted data.
List of Messages RAW Unidentified Image Cannot magnify ! Cannot rotate Incompatible WAVE format Cannot register this image ! Protected ! Too many marks Unselectable image Cannot complete ! Exx 122 You attempted to play back a RAW image. You attempted to play back an image that was recorded in a special data type (proprietary data type used by the camera of another manufacturer, etc.) or a movie recorded by another camera.
Troubleshooting Problem Cause The camera will not Power is not turned on. operate Memory card slot cover or battery cover is open. Batteries are loaded in the wrong direction. Batteries are depleted. Batteries are not the right type. The camera will not Camera is in Playback mode. record Flash is charging. z Reload the batteries in the correct direction. z Replace with unused alkaline or fully recharged batteries (two AA-size batteries). z Use an AC Adapter Kit ACK800 (sold separately).
Troubleshooting z Insert a new memory card. z If required, download the images to a computer and erase them from the memory card to make space. Memory card is not formatted z Format the memory card. (See Formatting correctly. Memory Cards (p. 19).) z If reformatting does not work, the memory card logic circuits may be damaged. Contact the nearest Canon Customer Help Desk. The SD card (sold separately) is z Slide the write protect tab of the SD card write-protected. upward.
Troubleshooting Batteries consumed Batteries are not the right type. quickly Battery capacity drops due to low ambient temperatures. Battery terminals are dirty. Batteries have not been used for over a year. z Use only unused AA-size alkaline batteries or Canon AA-size NiMH batteries. (For information about alkaline batteries, see Proper Battery Handling (p. 16).) z If shooting in a cold area, keep the batteries warm (by placing them in an inner pocket, etc.) until ready to use them.
Troubleshooting Sounds come from The camera’s vertical and horizontal z The mechanism for detecting the camera’s the camera interior orientation has changed. orientation is functioning. This is not a malfunction. Image is blurred or Camera moved z Hold the camera steady while pressing the out of focus shutter button. Autofocus function hampered by z Be careful not to block the AF-assist beam obstruction to AF-assist beam. with fingers or other items. The AF-assist beam is set to [Off].
Troubleshooting 127 Troubleshooting Subject in recorded Insufficient light for shooting. z Set the flash on. image is too dark Subject is dark in comparison to the z Set the exposure compensation to a positive background. (+) value or use the spot metering function. Subject is too far for flash to reach. z When the flash is used, the distance between lens and subject should not exceed 3.5 m (11.5 ft.) at wide angle and 2.2 m (7.2 ft.) at telephoto. z Raise the ISO sensitivity and then shoot.
Troubleshooting White dots or white Light from the flash has reflected off asterisks appear on dust particles or insects in the air. the image This occurs more frequently in the following conditions: - When shooting at the wide angle end. - When shooting with a high aperture value in the aperturepriority AE mode. Flash will not fire Flash is set to Off Images are not Incorrect video system setting. appearing correctly on a TV screen Shooting mode set to (Stitch Assist).
Appendix Using the Power Kits (Sold Separately) Using Rechargeable Batteries (Battery and Charger Kit CBK4-200) This kit includes a battery charger and four rechargeable AA-size NiMH (nickel metal hydride) batteries. Charge batteries as shown below. To a power outlet Charge Indicator Charge Indicator Charging two batteries Two batteries can be charged instead of four. The charge indicator blinks while charging, then remains lit when charging is finished.
Appendix z Wipe the battery terminals well with a dry cloth in the following situations, as the terminals may be soiled with oil from one’s skin or other dirt: - If the battery usage time has considerably diminished - If the number of recordable images has considerably diminished - When charging the batteries (insert and remove the batteries two or three times before charging) - When charging completes in a matter of a few minutes (the battery charger indicator remains lit) z You may not be able to fully c
Appendix z It takes approximately 110 minutes when two batteries are loaded one at each end of the charger and 250 minutes with four for the charger to fully recharge them (as determined by testing at Canon facilities). Please do not charge batteries in areas where the temperature is outside the range of 0 to 35°C (32 to 95°F). z Charging time varies according to ambient temperature and to the batteries’ initial charge state. z The battery charger may emit noise while charging. This is not a malfunction.
Appendix 2 Open the terminal cover, and connect the compact power adapter’s DC plug into the camera’s DC IN terminal. z Please unplug the adapter from the power outlet when you have finished using the camera. Use of an AC adapter kit other than AC Adapter Kit ACK800 may cause a malfunction in the camera or AC adapter kit. 132 Using the Lenses (Sold Separately) The camera supports use of the separately sold Wide Converter WC-DC52, Teleconverter TC-DC52A and Close-up Lens 250D (52 mm).
Appendix z If you use the flash when shooting with these attachments, the outer area of the recorded image (especially lower right corner) will come out relatively dark. z When using the tele-converter, please set the focal length to the telephoto end. At other zoom settings, the image will appear as if its corners have been cut off. z When using the wide converter, please set the camera to the wide angle end.
Appendix Conversion Lens Adapter LA-DC52F 3 When the mark on the camera and the mark on the ring are aligned, lift off the ring. 4 Align the z mark on the conversion lens adapter with the mark on the camera, and turn the adapter in the direction of the arrows as far as the { mark on the camera. This separately sold adapter is required for attaching the wide converter, tele-converter and close-up lens (52 mm thread diameter). Attaching a Lens 1 Be sure that the camera is turned off.
Appendix z To remove the conversion lens adapter, turn the adapter in the opposite direction with holding down the ring release button. 5 Set the lens on the adapter, and attach it securely by turning it in the indicated direction. 135 Appendix z Completely remove all dust and dirt from conversion lenses with a lens blower brush before use. The camera may focus on any dirt that remains. z Exercise due caution when handling the lenses since it is easy to dirty them with finger prints.
Appendix Using an Externally Mounted Flash (Sold Separately) High Power Flash HF-DC1 This is an attachable supplementary flash. Photographic subjects that are too distant for the built-in flash to illuminate may be captured using the High-Power Flash. Affix the High-Power Flash to the camera using the bracket as shown below. Please also refer to the user’s manual supplied with the flash.
Appendix z If the battery is used in cold regions (0°C/ 32°F or lower), you are recommended to carry a spare lithium battery (CR123A or DL123). Keep the spare battery warm in your pocket until immediately before using it, and exchange it frequently with the battery in the flash. z Remove the battery from the flash and store it in a dry and cool location if you will not use it for extended periods. Leaving it in the flash could lead to the battery leaking and damaging the flash.
Appendix 2 3 Open the terminal cover and use your finger nail to pull out the battery holder. Pull open the battery holder in the direction indicated by the arrow (c). Remove the battery by pulling it up in the direction indicated by the arrow (d). d c (–) Side 138 4 Insert a new battery with the (–) side facing up. 5 Replace the battery holder back and close the terminal cover. 6 When the Date/Time menu appears, set the date and time (p. 22).
Appendix Camera Care and Maintenance Use the following procedures to clean the camera body, lens, viewfinder, LCD monitor and other parts. Never use water, paint thinner, benzene, or detergents to clean the camera, as these may cause damage or deformation. Camera Body Lens Appendix : Wipe the camera body with a soft cloth or an eyeglass lens wiper. : First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth.
Specifications All data is based on Canon’s standard testing methods. Subject to change without notice. PowerShot A520/PowerShot A510 PowerShot A520: Approx. 4.0 million PowerShot A510: Approx. 3.2 million PowerShot A520: 1/2.5-inch CCD (Total number of pixels: Approx. 4.2 million) Image Sensor PowerShot A510: 1/2.5-inch CCD (Total number of pixels: Approx. 3.3 million) 5.8 (W) – 23.2 (T) mm (35mm film equivalent: 35 (W) – 140 (T) mm) Lens f/2.6 (W) – f/5.5 (T) PowerShot A520: Approx. 3.6x (Up to approx.
Specifications Shutter Speeds Metering System Exposure Control System Exposure Compensation Sensitivity White Balance Built-in Flash Flash Range Continuous Shooting * Camera automatically sets the optimal speed. Auto, pre-set (available settings: Daylight, Cloudy, Tungsten, Fluorescent or Fluorescent H) or custom Auto*, on*, off * Red-eye reduction available. Normal: 45 cm – 3.5 m (1.5 – 11.5 ft.) (W), 45 cm – 2.2 m (1.5 – 7.2 ft.) (T) Macro: 30 – 45 cm (11.8 in. – 1.5 ft.
Specifications Self-timer PC-controlled Shooting Recording Media File Format Data Type Compression Number of Recording Pixels Still Images Movies Playback Modes Direct Print 142 Activates shutter after an approx. 10-sec./2-sec. delay. Can be set using the custom settings. Available (USB connection only. Exclusive software program is included in the camera kit.) SD memory card/MultiMediaCard Design rule for camera file system and DPOF compliant Still images: Exif 2.
Specifications Display Languages My Camera Settings Interface Power Source Operating Temperatures Operating Humidity Dimensions Weight 21 languages available for menus and messages (English, German, French, Dutch, Danish, Finnish, Italian, Norwegian, Swedish, Spanish, Simplified Chinese, Russian, Portuguese, Greek, Polish, Czech, Hungarian, Turkish, Traditional Chinese, Korean and Japanese) The start-up image, start-up sound, operation sound, self-timer sound and shutter sound can be customized using th
Specifications Battery Performance Number of Shots LCD Monitor LCD ON Monitor (Based on Off the CIPA standard) AA Alkaline Batteries (included with the camera) Approx. 80 shots AA NiMH Approx. Batteries (NB-2AH (fully 300 shots charged)) Approx. 240 shots Approx. 800 shots Playback Time Approx. 180 min. Approx. 300 min. * The actual figures will vary according to the shooting condition and settings. 144 Test Conditions Shooting: Normal temperature (23°C ±2°C/73°F ±3.
Specifications Memory Cards and Estimated Capacities (Recordable Images) Memory card included with the camera PowerShot A510 PowerShot A520 MMC16M M1 (Medium 1) 1600 x 1200 pixels M2 (Medium 2) 1024 x 768 pixels Movie 7 61 237 13 109 425 26 216 14 121 26 216 838 50 411 1589 25 211 816 45 372 1438 MMC16M SDC128M SDC512MSH 9 76 295 16 136 529 838 33 269 1041 471 14 121 471 26 216 838 50 411 1589 25 211 816 45 372 1438 L (Large) 2048 x 1536 pixels M1 (M
Specifications z Some memory cards are not sold in some regions. z The maximum movie clip length is : 30 sec., : 3 min. or : 3 min.. The times shown are the maximum continuous recording times. * When using a 128 MB or higher capacity memory card.
Specifications NiMH Battery NB-2AH Battery Charger CB-4AH/CB-4AHE Supplied with the separately sold NiMH Battery NB4-200 set and the Battery and Charger Kit CBK4-200. Supplied with the separately sold Battery and Charger Kit CBK4-200. Type Nominal Voltage Typical Capacity Cycle Life Operating Temperatures Dimensions Weight Rechargeable nickel metal hydride battery 1.2 V DC 2300 mAh (min.: 2150 mAh) Approx.
Specifications Compact Power Adapter CA-PS800 SD memory Card Supplied with the separately sold AC Adapter Kit ACK800. Interface Rated Input Rated Output Operating Temperatures Dimensions Weight 100 – 240 V AC (50/60 Hz), 16 VA (100 V) – 26 VA (240 V) DC 3.15 V DC/2 A Dimensions Weight 0 – 40°C (32 – 104°F) MultiMediaCard 42.5 x 104.0 x 31.4 mm (1.7 x 4.1 x 1.2 in.) Approx. 180 g (6.3 oz.) (body only) Interface Dimensions Weight 148 Interface conforming to SD memory card standards. 32.0 x 24.
Specifications Wide Converter WC-DC52 (Sold Separately) Close-up Lens 250D 52 mm (Sold Separately) Approx. 0.7x (35 mm film equivalent at wide angle end: approx. 24.5 mm) Approx. 21 cm (8.3 in.) – infinity (at wide angle end)*1 Focusing Range Approx. 1 – 21 cm (0.4 – 8.3 in.) (from front of lens) (at wide angle end with using the Macro mode)*1 Thread Diameter 52 mm standard filter thread*2 Diameter: 58.0 mm (2.3 in.) Dimensions Length: 30.5 mm (2.2 in.) Weight Approx. 74 g (2.6 oz.
Specifications Tele-converter TC-DC52A (Sold Separately) Conversion Lens Adapter LA-DC52F (Sold Separately) Approx. 1.75x (35mm film equivalent at telephoto end: approx. 245 mm) Focusing Range Approx. 1.4 m (Approx. 4.6 ft.) – (from front of lens) infinity (at telephoto end)*1 Thread Diameter 52 mm standard filter thread*2 Diameter: 55.2 mm (2.2 in.) Dimensions Length: 49.3 mm (1.9 in.) Weight Approx. 86 g (3.0 oz.) Thread Diameter Focal Length *1 When mounted on PowerShot A510.
Photo Tips and Information This section offers photography tips. z Tip for Using the Self-timer (p. 45) Normally, the camera shakes a little when you press the shutter button. Setting the self-timer to delays the shutter release for two seconds and allows the camera to stop shaking, thus preventing a blurred image. Even better results can be obtained by placing the camera on a fixed, stable surface or by fixing the camera onto a tripod.
Photo Tips and Information Underexposure The whole recorded image is dark, which makes white elements of the image appear gray. Shooting bright subjects or in backlit conditions may cause the image to be underexposed. Adjust the exposure compensation towards the + end. Optimal Exposure Overexposure The whole recorded image is bright, which makes black elements of the image appear gray. Shooting dark subjects or in dark places may cause the image to be overexposed.
INDEX A AC Adapter Kit ..................................................131 AF Frame ...........................................................81 Aperture Value ...................................................79 Aperture-priority AE ............................................79 Auto Mode ..........................................................33 Auto Play ............................................................96 A/V Out Terminal ..............................................114 B C Care .....
INDEX Flash ...................................................................42 Focal Length .............................132, 133, 149, 150 Focus Lock .............................................................90 Manual .........................................................91 Format ................................................................19 H Histogram ...........................................................29 I Image Zone ........................................................
INDEX Messages ...............................................121 – 122 Metering Center-Weighted Averaging .........................82 Evaluative ....................................................82 Spot ..............................................................82 Microphone .........................................................12 Mode Dial .....................................................38, 76 Movie Editing ..........................................................62 Playback ...............
INDEX Resetting the Settings to Default ........................75 Resolution ..........................................................40 Ring Release Button ..........................................12 Rotate .................................................................94 S Self-timer ............................................................45 Sound ...........................................................74 Shooting .......................................................
INDEX Appendix 157
FCC Notice (Digital Camera, Model PC1106/PC1107) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
Functions Available in Each Shooting Mode The following chart shows the functions and settings available in each Shooting mode.
Drive Mode Reference Pages (1) Function Single Shot {* {* {* {* {* {* {* U* {* {* {* {* {* – Continuous Shooting – { { { { { { – – { { { { 48 Self-timer (10 sec.) { { { { { { { U { { { { { Self-timer (2 sec.
–(5) –(5) –(5) –(5) –(5) –(5) –(5) –(5) –(5) { { { {(6) ON {* {* {* {* {* {* {* U* – {* {* {* {* OFF { { { { { { { U – { { { { ISO Speed Auto Rotate Reference Pages (1) Function 87 92 161 Appendix The default for the settings changed by the menu and button operations can be restored all at once except for [Date/Time], [Language] and [Video System] (p. 75). (1)The default setting of the flash for the [Foliage] and [Fireworks] options is [Off].