PowerShot SD3500 IS / IXUS 210 Camera User Guide
127
Trimming
You can cut out a portion of a recorded image and save it as a new image
file.
Choose [Trimming].
● Touch ø, then n to choose the
1 tab, and touch [Trimming].
Choose an image.
● Drag horizontally across the screen to
choose an image, then touch [OK].
Adjust the trimming area.
X A frame will appear around the portion of
the image to be trimmed.
X The original image will display in the upper
left and the trimmed image will display in
the lower right.
● If you move the zoom lever, touch
or the image at the bottom right of the
screen, you can change the frame size.
● If you drag on the image at the upper left
or the image at the bottom right, you can
move the frame.
● If you touch , you can change the
frame orientation.
● In an image with detected faces, gray
frames appear around the faces located in
the upper left image. The frames can be
used for trimming. You can switch
between frames by touching .
● Touch [New File].
X The [Save new image?] screen will
appear.
Save as a new image and display.
● Follow Steps 4 and 5 on p. 126.
Recorded pixels
after trimming
Trimming Area
Trimming Area Display
COPY