Network Video Recording Software RM Series Administrator’s Manual

Configure a Storage Server Group
45
3
Storage Server Settings
 Configure the Mail Server
(1) [SMTP Server] and [Port]
Enter an SMTP server name and change the port
number, as required.
(2) [Authentication]
Specify an SMTP server authentication method
([None], [POP before SMTP], [SMTP-AUTH]).
(3) [User Name]
If [POP before SMTP] or [SMTP-AUTH] is selected in
[Authentication], enter a user name to be used for
authentication.
(4) [Password]
Enter a password to be used for authentication with
the user name entered in (3).
(5) [POP Server] and [Port]
If [POP before SMTP] is selected in [Authentication],
enter the name of the POP server to be used for
authentication and the port number, as required.
(6) [OK] and [Cancel]
Close the dialog box.
Note
If [POP before SMTP] is selected in [Authentication], the Storage
Server performs POP authentication before sending an e-mail
message.
 Add an E-mail Notification Destination
(1) [To]
Enter an e-mail address as the destination.
(2) [From]
Enter the e-mail address of the sender.
(3) [Subject]
Enter the subject of the e-mail.
(4) [Min. Priority]
Specify the minimum event priority level which will
generate an e-mail notification.
(5) [OK] and [Cancel]
Close the dialog box.
The e-mail address for the specified destination and
the event priority are added to the [E-mail Notification]
list.
1
Click [Mail Server Settings] to display the [Mail Server
Settings] dialog box.
2
Configure the mail server settings.
3
Click [OK] to close the dialog box.
(1)
(2)
(5)
(6)
(3)
(4)
1
Click [Add] in the [Events] tab of the [Storage Server
Group Settings] dialog box to display the [E-mail
Notification Settings] dialog box.
2
Configure the e-mail notification settings.
3
Click [OK] to close the dialog box.
(1)
(2)
(4)
(5)
(3)