User guide

81
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status from the Display Settings Menu
Adjusting the Total Number of Dots
[Total dots]
You can adjust the total number of dots in the
horizontal direction.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Tracking
[Tracking]
You can adjust the tracking when the projected
image flickers due to a tracking error.
T
T
T
Press the [MENU] button when you finish.
Display settings
Input signal settings
Total dots
Increases the total number of dots.
Decreases the total number of dots.
z Perform this adjustment if the auto PC
adjustment function cannot adjust the
project image correctly.
z The setting is recorded for [ANALOG
PC-1] and [ANALOG PC-2] sepa-
rately.
ANALOG PC
>
<
Display settings
Input signal settings
Tra ckin g
Increases the set value.
Decreases the set value.
z Perform this adjustment if the auto PC
adjustment function cannot adjust the
project image correctly.
z The setting is recorded for [ANALOG
PC-1] and [ANALOG PC-2] sepa-
rately.
ANALOG PC
>
<