Network Camera VB-H41/VB-H610D/VB-H610VE/VB-H710F Operation Guide

Panorama Creation Tool
91
6
Admin Tools
Note
• While a panorama image is being captured, the image
stabilizer function is temporarily disabled.
• While a panorama image is being created, all connections
other than Administrators and RTP connections are cut off.
• When a small value is entered for [Maximum Frame Rate:
Video Transmission] under [Video] > [JPEG] in the Setting
page, panorama capture is slowed down.
Saving/Deleting a Panorama Image on the
Camera
How to Save
Click [Save to camera], and then click [OK] in the
displayed dialog box.
The panorama image is saved to the camera.
How to Delete
The image in the panorama image display area will be
cleared.
The panorama image saved in the camera is deleted.
Saving a Panorama Image as Image Files/
Opening from Image Files
You can save a recorded panorama image as an image
file or open image files as a panorama image. Only JPEG
image files created using Panorama Creation Tool can be
handled.
How to Save
Click [Save to file] and then select the folder you want to
save the image file in and enter the file name in the
displayed dialog box.
How to Open from Image Files
Click [Load from file] and then select the image files you
want to use in the displayed dialog box.
2
When the capture is complete, click [Finish Panorama
Creation] if the image is satisfactory.
1
To delete the panorama image saved to the camera,
click [Clear].
2
Click [Save to camera], and then click [OK] in the
displayed dialog box.