Network Video Recording Software RM Series Administrator’s Manual

Record on a Regular Basis (Repeating Weekly Schedules)

Setting a Recording Schedule

If you initialize the head position (the camera points the

head forward, reinitializes, and then returns the head to

the former position) during recording, the video during the

movement of the head will also be recorded.

When an external camera is connected and [Use External

Video Input] is enabled, the settings on this dialog box are

unavailable.

Note

• Clicking the [Settings] button alone does not perform a preset

tour. You must first configure the settings in the [Preset Tour

Settings] dialog box.

• You are not able to specify camera angle settings when

configuring the intelligent function, configuring motion

detection settings with [Detect Motion Using] > [Camera], or

when configuring multiple cameras. You are not able to specify

[Preset Tour] settings when configuring motion detection

settings with [Detect Motion Using] > [Storage Server].

• To be able to select [Presets] or [Preset Tour], you must first

the camera manual.

Configuring a Preset Tour

Select [Preset Tour] in the [Camera Angle] settings and

specify the order of the presets that are registered in the

camera.

The tour starts with the first preset and proceeds

down the list. Change the order by selecting a preset,

and then clicking [Move Up] or [Move Down].

To remove a preset, select the preset and click

[Remove]. To edit a preset in the list, select the preset

and click [Edit].

Click [Settings] to display the [Preset Tour Settings]

dialog box.

Click [Add] to open the [Edit Preset Tour] dialog box.

Select a preset from the [Preset] list.

Configure the speed and pause settings using the

sliders ([Speed (PT)], [Speed (Z)], and [Pause (sec)]).

Click [OK].

Repeat steps 2 to 5 for additional presets.

Specify the order of the presets.