Specifications

WITE32 Release Notes Version 3.20
The following items are on the Bit Fields tab:
The Bit Field Groups panel Use the list shown in this panel to select the bit field group you want to
be displayed on the Bit Fields panel.
Note: The <<ALL BIT FIELDS>> item is not a group name. When you select
it, all bit fields are displayed on the Bit Fields panel simultaneously.
The Bit Fields panel Displays all bit fields from the bit field group selected on the Bit Field
Groups panel.
• The Address column shows the register physical address in a
hexadecimal format.
• The Name column shows the bit field names.
• The Value column displays the bit field values. This is the
only the column, where you can change a value.
Note: To change a bit field value, switch to the edit mode by double clicking
the value of the selected bit field. You can also adjust a bit field value
using the scroll bar beneath the Bit Fields grid.
• The Description column provides a commentary to the
corresponding bit field.
Note: You can reorganize the table on the Bit Fields panel by sorting the
entries in one of the columns in ascending or descending order. Click
the column header. The column will be sorted and a small up-arrow
indicating the ascending order or down-arrow indicating the
descending order appears next to the header. To change the order,
click the column header once again.
The bit field value scroll bar
at the bottom of the bit field
list
Move the scroll bar to the left to decrease the value, or to the right to
increase it.
The Link Bit Field to the
Register check box
Select this check box and the Register frame will also show the register
data for the bit field currently selected on the Bit Fields panel.
The Find Register button Click the button to open the Find Bit Field dialog box
(see Section 3.5.4).
The Default button Click the button to load the default values of all bit fields specified in
the chip driver into the chip. The bit fields, controlling the Data Rate
and the Encoding Ratio are not affected.
The Refresh button Click the button to update the bit field values displayed on the Bit
Fields panel.
The Register frame provides the control over the chip registers and contains the following items:
Guzik Technical Enterprises 23