Operating instructions

24
ENG
Connection
Connection options for sub-
woofer modules S, M and L:
1. Amplifier or AV receiver
with “Pre-Out” or special
stereo subwoofer outlet (LFE):
connect via Low Level Input
(ill.
1
)
Cable: standard cinch cable
2. Amplifier or AV receiver
with mono subwoofer outlet
socket: connect via Mono
Low Level Input
(ill.
2
)
Cable: standard cinch cable
Connection options for sub-
woofer modules S, M and L:
3. Amplifier or AV receiver
without special subwoofer
outlet: connect with loud-
speaker outlets on amplifier
via High Level Input
(ill.
3
)
Cable: standard speaker cable
Ensure correct polarity:
red = plus, black = minus
Note:
The Low Level and High Level
Inputs may not be used at the
same time!
Connection options for sub-
woofer modules M and L:
4 a. Canton subwoofer with
additional “High Level Output”.
Input jacks e. g. for connecting a
second subwoofer.
(ill.
4
a)
Cable: standard speaker cable
4 b. Canton subwoofer with
additional “Low Level Output”.
Input jacks e. g. for connecting a
second subwoofer.
(ill.
4
b)
Cable: standard cinch cable
Note:
Do not confuse the left and right
sides!
Connection option for sub-
woofer module L:
5. “Low Level Out Filtered”:
to reduce the load on smaller
active loudspeakers frequencies
below 80 Hz are filtered out.
(ill.
5
)
Please ensure that all electrical components are switched off before connecting your subwoofer. Depending on the make and model of your
amplifier or receiver, there are various connection options for your Canton subwoofer.